Having problems with your Euro-Pro Super SC710Z Steam Vacuum ?

No steam release

\015 Unit heats up but when trigger button is held down, no steam is released from nozzle. Steam pressure is built up in unit, when unscrewing the safety cap steam pressure is noticeable. Concentrator nozzle is not clogged, I cleaned all nozzles with a paper clip. Can I add a teaspoon of vinegar to water, to aid cleaning?\015

Answers :

I solved the problem, the metal (hot!) release rod gets stuck & needs a little push.
\015\012Unfasten the top by prying off the rubber gasket after removing the top. Remove the 2 small phillips screws, then remove the front that holds the nozzle, & remove those 2 phillips screws.
\015\012Carefully pry up the top with a putty knife, inside you will see the tip of a metal piston that the plastic release knob is supposed to contact. Set it on its front, & soak the piston with a light household or sewing oil, giving it a few taps with a blunt object occassionaly to loosen, heat up & test before reassembling, but remember, the piston is very hot. When you push on the piston with a screwdriver, it should release the steam, but also stop when you let go. Work with it a little & it will come back to life.
Repair Help & Product Troubleshooting for Euro-Pro Super SC710Z Steam Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When I push the button to release steam on the handle it feels soft and no steam is released. It has been going out for a while now.


I didn't fix the problem but I did take the handle apart. There is a little metal piston that is pushed down by the button on the outside of the handle. It was very sticky and stuck in the off mode. I freed it when I took it apart but obviously it ju ... Steam Fast SF-275 Steam Max Canister Vacuum

While using my mop yesterday, it stopped letting steam come out. Tonight I plugged it up again and you could hear it trying to steam. I push the button in to release the square frame and it pushed out a burst of steam and pushed the head off. Put it back together and it still will not let steam out. No matter how much water is in it.


\012Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Ste ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

My steam mop gets hot but steam is not coming out when i pump it. However when I release the bottom attachment steam comes out of bottom of the base (purple part). I took the attachment off to see if it was plugged but dont see anything. Any suggestions?


Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop Problem ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

No steam I am using this product for the first time. I've followed the manual down to the letter, but is doesn't produce or releases any steam. The heating element does operate and the warninglight does turn off but yet there is no steam to be found, even though I'm pressing the lever on the pistolgrip. What can be the problem, and how do I solve it? Thanks in advance. Mrs. Brouwers


... Karcher 1201 Canister Vacuum

My shark steam cleaner won't "steam out" when I push the button, what's up. Light is on, when I release he safety cap,steam comes out??


... Euro-Pro Ultra Steam SharkTM II Hard Surface Steam Cleaner Vacuum

Kenwood Steam mop SC5000 does not release steam


HERE IS A LINK FOR THE MANUALhttp://www.kenwood-australia.com/support/instruction_manuals/sc5000.pdf ... Vacuums

Shark steam mop will not release water or steam.


Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop Problem ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

My little yellow steam cleaner will not release any steam from gun


Nor mine, can't seem to buy a replacement. Any luck? ... Vacuums

My se200 motor is working but no steam is being released


... Shark Vacuums

No steam release


I solved the problem, the metal (hot!) release rod gets stuck & needs a little push.\015\012Unfasten the top by prying off the rubber gasket after removing the top. Remove the 2 small phillips screws, then remove the front that holds the no ... Euro-Pro Super SC710Z Steam Vacuum

Hello i can turn my steam buddy platinum 44G258 on, water boils, press hand gun get a buzzing noise like you do with a jet wash, but no steam comes out, it seams the water is not coming through, have check the cap on water container thats ok, its where it releases the water to is seams to be where the problem is, i think ! first time we have tried to use it many thanks steve.


... Vacuums

Will not release steam. Body of steam mop gets hot, but no results


Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop Problem ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Steam does not come out when we pump the handle.Water just pours out from the bottom. Water does heat, but steam does not release.


Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop Problem ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

My Shark is less then one year old. The Shark steamer will heat up - the water is hot - however, when I push the handle to mop the steam is not released, then it cools down and only cold water is releases from the mop head.


Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop Problem ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

The extra large mop head attachment will not release steam. It seems to be clogged, and the steam escapes above the head attachment. How can this be resolved?


Hi,I saw this post, so I had to go and checkout my wife's shark....If you pull the attachment off and look inside you will see that there is a small hole that the steam travels through into the flexible hose with the spring around it and ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

My mop will not release steam. The water is heating up but steam not comming out.


Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head... ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Steam not comming out when button is pressed. water boils steam builds and the only was to release is to unscrew cap slowley.


Corrosion prabably built up in the hose or end tip ... Dirt Devil PD20005 Handheld Steam Cleaner

Breville iron, BIR300, purchased from Myer Frankston Friday, 18 March. Tthe steam selector dial will not move, being stuck permanently in the No Steam position. Is there some sort of release mechanism on a new iron?


... Vacuums

Chassis hook broken to rod which controls release of liquid shampoo in Hoover steam cleaner. It is the back of the handle area that is snapped off, not the actual rod with "push on / release"


If it is part of the handle, it breaks inside alot, part number 39458006. #2 in the picture.\015\012 \015\012 ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Bissel spinner not working on steam cleaner. When water is released this section on the machine is suppose to spin to tell you that water is being released but it isn't.


You need to replace the pump belt. Here is the belt you need and the manual:Bissell 8910 ProHeat Belt and Manual ... Bissell 8910 ProHeat Clear View Upright Vacuum

Shark steam mop power light goes on, basin feels like it is getting warm, but there is no steam or water released. Pad is completely dry. What's going on.


Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop Problem ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Heats up and produces steam but the release button does not open the flow of steam.


To remedy this, I did the following:\015\012\015\012\015\012\015\0121) Removed screws from: a) Lower area of handle (1 screw), b) Top of steamer, under round rubber flap around fill hole (2 screws), c) Front of steamer where nozzles attach (2 s ... Scunci 52067 Handheld Steam Vacuum

It gets hot but does not release steam - Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum


Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop Problem ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

I have a Shark Steam Mop S3501CO model. When I press the release button to exchange mop heads, the mop head does not release. Nils Friis


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

I HAVE A SHARK STEAMER S3501 NO STEAM COMING OUT BUT WHEN RECTANGLE MAT AND HEAD REMOVED STEAM WAS RELEASED BUT DID NOT GET TO THE MAT WHEN ALL PUT TOGETHER-HOW TO CLEAN THE TUBE IN THE HEAD??


Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop Problem ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0378 seconds