Having problems with your Fantom Vacums FM430 Handheld Vacuum ?
How do you open the hand held vacuum to empty the contents??
There is Dust cup release need where the power cord connect to the vacuum. Once you have released the dust cup from the vacuum. First the are 4 parts to the dust cup, The actual dust cup, the housing for the filter and mesh screen. The dust cup will unscrew from the the housing which holds the filter and mesh screen. You can also pull out the filter and mesh screen out of the housing, If you have taken it apart fully you will have 4 seperate parts.
Repair Help & Product Troubleshooting for Fantom Vacums FM430 Handheld Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
How do you open the hand held vacuum to empty the contents??
There is Dust cup release need where the power cord connect to the vacuum. Once you have released the dust cup from the vacuum. First the are 4 parts to the dust cup, The actual dust cup, the housing for the filter and mesh screen. The dust cup wil ... Fantom Vacums FM430 Handheld Vacuum
My Dirt Devil KONE Hand Vacuum won't unscrew to empty
Sounds like it may be cross threaded , or bits of grit holding it tight ,try tapping round the rim with screwdriver handle to see if it will loosen anything that's holding it ,then get someone else to help you hold one end and you hold the other end ... Dirt Devil KONE Hand Vacuum MO213BLU Vacuum
How do you open the vacuum - Dirt Devil KURV Hand Vacuum Champagne Vacuum
Wish I knew! We've tried everything and can't get it open. ... Dirt Devil KURV Hand Vacuum Champagne Vacuum
Miele S5000 (revolution 5000) vacuum cleaner - How do I open the casing? When the power button on the handle is pressed the green power-level lights on the handle light, but the motor sounds like it gives a little 'jump' but nothing more. The orange power light on the body also dims. I assume the motor or fan is jammed, but I can't open the body to find out. I've taken out to screws inside near either end of the handle, but to no apparent effect. I'm assuming the body is held together by plastic
Pensare Vaccum Hi: I have an older Pensare hand held vacuum. It's the T-Rex, mod # 1505. My daughter lost the filter with the plastic frame around it that goes inside. I love the vacuum, it works great, so I don't want to buy another one and add to the land fills. Can I buy a replacement filter for it? Thanks! Autumn Moore 503-481 1817
... Pensare' Rocket V17201 Handheld Vacuum
How do I take it apart to empty the cone? - Dirt Devil KONE Hand Vacuum MO213BLU Vacuum
The cone where the dirt goes in will twist off about 1/4 turn and then lift out the filter to empty ... Dirt Devil KONE Hand Vacuum MO213BLU Vacuum
We have a Bissell Revolution Lift-Off Turbo 3760-1 and the upright brush is not working/rolling. It only moves when pushing the vacuum. We checked the belt and it seems to be fine. The vacuum works fine as a hand-held. Any suggestions? Thanks!
These belts need to be changed every 6 months regardless of the way they look. ... Vacuums
How to connect hand held device to vacuum - Hoover F5842-9RM Steam Vacuum
Click the link below for manualhttp://hoover.com/file/610/ ... Hoover F5842-9RM Steam Vacuum
My new Dirt devil kurv hand vac will not open to empty the dirt cup. Unit will not twist open...
... Dirt Devil KURV Hand Vacuum Champagne Vacuum
Hand held attachment works, floor vacuum works...carpet vacuum does NOT work.
That means that you need to replace the belt. Here is the belt you need and the manual which has instructions:Dyson DC07 Belt and Manual ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Emptying vacuum This may sound really silly of me but I cannot remember how to open the thing up to empty it! Help!
I had the same problem!\015\012There is a video on YouTube that shows how to open it.\015\012http://www.youtube.com/watch?v=1SYstrPyD2g\015\012 ... Westinghouse WST1810 Canister Vacuum
When the vacuum is on and in the "stand up" position in oder to use the hand held part of it, the top makes a strange sucking sound that it never did in the beginning, But as soon as you use it as a floor vacuum it stops.
IT SOUNDS LIKE THERE IS AN OBSTRUCTION IN THE HOSE AND CAUSING THIS NOISE ... Dyson DC14 Bagless Upright Cyclonic Vacuum
Hoover Mach 6 U5198-900 vacuum roller brush won't turn. I had opened the bottom to clean hair off the roller. the belts are not broken. When I closed it and turned it on, now the roller brush won't turn. I can push and turn it by hand, but not easily. Then I noticed the brush on/off switch is turned off, but when I step on it, it won't turn on. I was thinking I let something get out of place when I opened the bottom, but can't see what.
... Hoover Tempo Widepath Upright Vacuum - Blue
Poor suction I have a hoover hush s5627 vacuum purchased about 4 years ago from Costco. It's suction power isn't so good anymore. I've checked all the lines & hoses and they're clear and I've changed the bag. I even disconnected the pipe from the vacuum unit and held my hand over the intake. While the machine roars like a jet engine the suction power just ain't like it used to be. What could possibly be the problem?
This vaccuum has a Fan Blade inside connected to the motor that spins to create the suction you feel. After a few years of use (and misuse) the blades on this (plastic) fan will be broken off, thus damaging the unit. These Fans are replaceable if yo ... Vacuums
I borrowed a Shop Vac Ultra plus wet dry vacuum to use as a dry vacuum. It needs emptying. How do I open it, and clean the filter? Thanks
WHEN IT FULL U WILL KNOW WHEN IT CAN **** UP ANY THING CLEAN ALEAST EVERY TWO WEEK ... Vacuums
The cleaning solution stopped coming out of the rotating brush but still comes out of the hand held vacuum hose.
If you can check where the vacuum hose where it is connected their might have dirt in the opening to the rotating brush,or it is glogged,clean with a wire and it will be ok ... Bissell SpotBot Robotic Wet/Dry Vacuum
On the DC07, the entire cyclone assembly must be removed to empty the dust, debris, etc. collected when vacuuming. On the top of the cyclone is a "trigger" that you lift with your finger to release the bottom catch, which allows a clear flap to open on the "clear bin," thus letting all the debris fall out. My problem is when you lift the finger trigger, it does not release the catch on the bottom. Since the catch won't release, I cannot remove the entire clear bin either from the cyclone.Any sug
Beofre you go to the extent of buying a replacement canister, you can remove the top and using a straightened coat hanger type thing open that bottom lid. Then maybe you can clean the rim and possibly add some silicone spry to loosen things up. Here' ... Dyson DC07 Bagless Upright Cyclonic Vacuum
I have a Flex hand held vacuum. It turns on, the motor works, air is blowing out of the side vent very forcefully, but it is not picking up anything with the hose - no suction at all. My hose does not seem to be clogged.
No the hose,, check the filter and compartment behind the filter.. Note if there is air passing through the filter,, or being sucked through it.. If not chances are the extractor fan inside the machine may have broken ou will need to open it up and r ... Black & Decker CHV9600 Handheld Vacuum
Lossing suction, especially hand held - Eureka Smartvac 4870 Bagged Upright Vacuum
Did you check the hose to see if there is a slice in it somewhere. Alot of times you can get caught on something or bend it the wrong way and it will crack the hose causing suction loss. The other possibility is a clogged filter somewhere in the syst ... Eureka Smartvac 4870 Bagged Upright Vacuum
I have a DC17 animal vacuum and it is not picking up as well as it used to. It misses small particles on the floor. The hand held piece seems to work ok, but otherwise, it seems to not have as much suction. What should I do. It is only a little over a year old.
It could be that you need a new belt. Over time the belt stretches and wears and then it doesn't pick up well. Here is a link to the belt you need.Dyson DC1 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
How do you hook up the hand held attachment - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Should just lock onto the end of the hose. ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
I have a silent ultra super shark 1000 watts hand held vacuum and i can not find the right hepa filter for it help please
... Euro-Pro S3325 Handheld Steam Vacuum
I can not open my dyson canister to empty it - Dyson DC07 Bagless Upright Cyclonic Vacuum
If you take the bin off of the unit and try to pull the release trigger and it feel vry lose then you will find that the connector rod inside the cyclone has broken you will need to replace the cyclone unit as the rod comes complete with the cyclone ... Dyson DC07 Bagless Upright Cyclonic Vacuum
Suction is very poor. Changed the bag and it was great for a day. Now with an empty bag, it doesn't pick up once again. This is the little hand-held one that comes with the upright.
... Oreck Super-Deluxe BB870AD Bagged Canister Vacuum
I cannot charge my two year old electrolux pronto. I purchased a brand new hand held vacuum for it, but even the new one does not charge. When I plug in the cord nothing happens. If I turn on either the long handle or the portable unit within the long unit, the blue charging light comes on for a few seconds, then out. This tells me that the circuit is intact without a broken wire somewhere. I took it all apart carefully and could see nothing broken or out of place. On re-constructing it, it
It must be the charging transformer. We have already ruled out the vacuum unit. Unfortunately the transformer is not a serviceable part, and will need to be replaced. ... Electrolux Pronto 2-In-1 Stick/Hand Vacuum - Cayenne