Having problems with your Fantom Vacums FM780 Twister 700LX Upright Vacuum ?

Fantom twister wont work light is on - Fantom Vacums FM780 Twister 700LX Upright Vacuum


Answers :

When you say, "just stopped", did the MOTOR stop operating and there's no sound from it at all? Or, is the motor still working or sounds like it does, and it stopped vacumning?
\015\012
\015\012If the MOTOR stopped, most likely there is a short somewhere in the connection at the motor. Think 'repair shop'.
\015\012If the motor still runs and there's no VACUMN ACTION, think Roller Brush which operates by virtue of a rubber belt. Turn the machine on its side and turn it ON, keeping FINGERS !AWAY! from the roller area. If the Roller Brush is not moving it may be that the belt has slipped off or is broken or simply too loose to turn the Roller. Also sometimes debris such as strings, long hair, carpet strands/fibers will become wrapped around the roller especially next to the roller bearing/brace points, to the point of binding so tightly that the roller will no longer be able to actually roll which would now prevent it from 'Vacumning' or sweeping dirt and such up into the vortex of the vacumn chamber. In which case, !!UNPLUG!! the machine, use small scissors to cut away the material wrapped around the roller paying particular attention to the brace point areas.
Repair Help & Product Troubleshooting for Fantom Vacums FM780 Twister 700LX Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Fantom twister wont work light is on - Fantom Vacums FM780 Twister 700LX Upright Vacuum


When you say, "just stopped", did the MOTOR stop operating and there's no sound from it at all? Or, is the motor still working or sounds like it does, and it stopped vacumning?\015\012\015\012If the MOTOR stopped, most likely there is a ... Fantom Vacums FM780 Twister 700LX Upright Vacuum

Repair manual for fantom fm780 - Fantom Vacums FM780 Twister 700LX Upright Vacuum


... Fantom Vacums FM780 Twister 700LX Upright Vacuum

How do you open access port to remove clogs? - Fantom Vacums FM780 Twister 700LX Upright Vacuum


... Fantom Vacums FM780 Twister 700LX Upright Vacuum

Fantom FM741B vacuum cleaner user manual - Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum


... Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum

Fantom vacuum not sucking - Fantom Vacums FM740 Twister 300SE Bagless Upright Vacuum


... Fantom Vacums FM740 Twister 300SE Bagless Upright Vacuum

Twister moves instustion - Fantom Vacums FM740 Twister 300SE Bagless Upright Vacuum


... Fantom Vacums FM740 Twister 300SE Bagless Upright Vacuum

Need new roller brush ***. and belts FM741B - Fantom Vacums FM741 Twister Bagless Upright Vacuum


... Fantom Vacums FM741 Twister Bagless Upright Vacuum

Not picking up, not getting any suction. - Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum


Try to clean the filter out. I have a similar vacuum and I clean mine out and wash the filter out. Leave the filter to dry overnight before you use it again.If this fails try figure out if there is something blocking it so it is not able ... Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum

What year was this model made - Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum


... Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum

Wont **** up anything - Fantom Vacums Cyclone XT Upright Vacuum


That\015\012 type of vac is notorious for stopping up where the 90 degree turn is. \015\012You may need to access it from the vac head by removing the beater bar \015\012or take it apart where ever you can access the turns and hoses. ... Fantom Vacums Cyclone XT Upright Vacuum

Vacuum dead I have oreck XLx2 bagged upright - the belt ,plug and cord have been replaced - has been working great - now went to plug it in and it does not work - the light goes on in the on/off switch so power is working but vacuum is dead - any suggestions


If the cord coming from the bottom up to the handle is loose, and is a plug, push it in. If that doesn't help. then could be a problem with the motor. One other thing to check is inside the handle, maybe a wire came loose. ... Oreck XL2200 Bagged Upright Vacuum

Where can I get a switch for fantom vacuum - Fantom Vacums Lighting Canister Vacuum


... Fantom Vacums Lighting Canister Vacuum

Dirt devil total vision hose wont work - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Need a Fantom Lightning roller brush - Fantom Vacums Lighting Canister Vacuum


... Fantom Vacums Lighting Canister Vacuum

I Have a hoover purepower 1800w upright vacuum cleaner that works perfectly except for it wont stand upright anymore. Any advice


Not sure what model of Hoover you have, you may need a new handle release. ... Vacuums

Miele classic vacuum,wont run, tried pressing restart.Was working fine earlier in day. When cord retracting the 1200 watt setting light on top of vacuum came on for a split second.


Vacuums have a heat activated breaker in them. Is the action end hot? If you get a clog, the motor won't get the air blowing through it and it will overheat causing the breaker to blow. If this is the case, wait (sometimes a few hours) for it to cool ... Miele Vacuums

I have a Kenmore Progressive Upright Vacuum - Purple, and it worked just fine. I emptied the canister (like always) and put it back in place. I turned on the vacuum to it immediately shutting down (motor) and only the lights come on. There is no movement/noise/suction at all! Any suggestions? I have tried everything. I have no idea why it did this.


Make sure that something didn't fall into the fan assembly in the base when the canister was removed. The motor should have an overload reset switch. Try moving the motor manually (power plug out) to make sure that it isn't bound up. ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

How do i replace the belt on my vacuum - Fantom Vacums Cyclone XT Upright Vacuum


There are two black screws on the back of the hood top that need to be taken out and then the top hood will come off forward. Then you can see the belt and rollerbrush. Slide to rollerbrush out and put on a new belt to the motor pulley and then put ... Fantom Vacums Cyclone XT Upright Vacuum

I have a Eureka Upright vacuum (4800 Series). When I try to start it by turning the switch on, it wont. For few days, I was able to get around this problem by repeatedly turning the switch on and off until it turned on but that does not work any more. Could it be something related to the switch it self or the power cable. My wife mentioned that one of my kids might have pulled the power cable too hard (at the back of the vacuum). Any help to solve this problem will be very much appreciated. Tha


... Eureka Smartvac 4870 Bagged Upright Vacuum

Why does my Dyson Animal Upright Vacuum power light turn red when I tilt it back to vacuum? It will work if I switch it to bare floors and don't need the beater brush.


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I have a hoover upright vacuum 1 year old and the brushes wont spin but the attachments will still work


Change the belts and if it still doesnt work theres a problem with the motor ... Hoover U5450-900 Windtunnel Supreme Bagged Upright Vacuum

Need to change the belt on model #FC285HL - Fantom Vacums Cyclone XT Upright Vacuum


Http://www.fixya.com/support/p12053-fantom_vacums_cyclone_xt_upright_vacuum\015\012\015\012there is a pro waiting to help you live ... Fantom Vacums Cyclone XT Upright Vacuum

Sebo upright. Check brush light come on when in use. Vacuum appears to be working ok but seems a little heavy.


Try adjusting the height up ( higher the better ) also make sure the brush is turnig freely if not remove it ( push the button on the top of the brush roll housing and pull the side off ) and make sure nothing is stuck ... Vacuums

My vacum roller brush dosenot work - Eureka 2961AVZ Bagless Upright Vacuum


The most common failure there is the drive belt from the motor to the brushes has failed. Consult your local vacuum store for a replacement. Normally they are fairly easy to change. Check and see if the brush is free wheeling or needs a push to get ... Eureka 2961AVZ Bagless Upright Vacuum

The extendable wand wont work? - Dyson DC25 All Floors Bagless Upright Vacuum


Throw you dyson away and write nasty messages here because dyson has the worst website for information. for what we pay you should get on-star ... Dyson DC25 All Floors Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1303 seconds