Having problems with your Fantom Vacums Lighting Canister Vacuum ?

Fantom fury vacuum

\015 How do you change the belt on the fantom fury vacuum?\015

Answers :

HOW DO I CHANGE THE BELT ON THE FANTOM® THUNDER® AND FURY®?\015\012\015\012a.gif\015\012\015\012\015\012\015\012\015\012fantombeltchange1.jpg
fantombeltchange2.jpg
fantombeltchange3.jpg \015\012\015\012
    \015\012
  1. Unplug the machine. \015\012
  2. From the front of the machine, remove the collection bin. \015\012
  3. Facing the back of your vacuum, remove each of the Philips head screws located above each of the rear wheels. (Figure 1) \015\012
  4. To remove the base cover, place your thumbs in the two screw holes in the back of the machine. Push forward and up on the screw holes to disengage the 3 cover locking tabs. Put the cover off to one side, and go to the front of the machine. (Figure 2) \015\012
  5. Check the drive arm for any black streaks which indicate residual rubber from the last belt. The drive arm is located on the right side of the motor. The easiest way to remove any residual rubber is with some nail polish remover on a rag or with steel wool. \015\012
  6. To attach a new belt, remove the brush from the base of the machine by pulling up straight up with two hands. \015\012
  7. Take the new belt and hook it over the steel drive arm. Pull back on the belt slightly, to create some tension. \015\012
  8. Put the brush inside the belt loop so that the track for the belt is aligned with the belt itself. \015\012
  9. Replace the brush by aligning the metal end so the points face downward. (Figure 3) \015\012
  10. Rotate the brush by hand to check that the belt is running freely and easily in its designated space between the bristle. \015\012
  11. Replace the cover by placing the nose in first. Once in place fasten with the two cover screws and then replace the collection bin.
Repair Help & Product Troubleshooting for Fantom Vacums Lighting Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Fantom Fury and need to replace the belt. Please tell me how to get into it so the belt can be replaced. It is a Fantom Fury Vacuum Cleaner # 3680093 Fantom Technologies Model # F10051 01


... Vacuums

My Fantom Fury vacuum does not pick up dirt. [The


You will have a blockage in the vacuum hose. Take it of and outside and push the garden hose from one end to the other. ... Fantom Vacums XT450K Upright Vacuum

Fantom fury vacuums


Most power heads have some screws from the bottom to take out, the the top comes off, then you can get to the belt. ... Fantom Vacums Lighting Canister Vacuum

Fantom fury vacuum


HOW DO I CHANGE THE BELT ON THE FANTOM® THUNDER® AND FURY®?\015\012\015\012\015\012\015\012\015\012\015\012\015\012 ... Fantom Vacums Lighting Canister Vacuum

On the bottom of the Fantom Fury where it states:"The United States and Canada utility patent....". Now go to the far right end of this statement (the end opposite the spring, well I have a crack in the plastic which, when toggled, moves the entire plastic underside of the vacuum to move. In other words, I think I need an entire bottom plastic plate. The cracked area also makes the foot lever (which lowers or locks the vacuum handle) not work as the crack makes it impossible to work. I know


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=545424\015\012Generic problem for all Vacuums\015\012On the bottom of the\015\012Posted by c ... Vacuums

Fantom fury vacuum manual - Vacuums


... Vacuums

I have an older Fantom Fury Vacuum. When I turn on the power button my vacuum does not come on. The outlet works well with other appliances. I have used it already today and when moving to another room it would not come on. What is wrong?


... Vacuums

Where can I find a belt for my Fantom Fury vacuum and how do I replace it?


You can get replacement belts and view the manual here:Fantom Fury Replacement Belts and Manual ... Vacuums

FANTOM FURY VACUUM MOTOR HOOKUP EMAIL [email protected]


... Fantom Vacums CW600 Upright Vacuum

Fantom fury model 8-FY252 - Vacuums


... Vacuums

Need a manual for a fantom th51 vacuume - Fantom Vacums Vacuums


... Fantom Vacums Vacuums

Where can I get a switch for fantom vacuum - Fantom Vacums Lighting Canister Vacuum


... Fantom Vacums Lighting Canister Vacuum

Fantom vacuum not sucking - Fantom Vacums FM740 Twister 300SE Bagless Upright Vacuum


... Fantom Vacums FM740 Twister 300SE Bagless Upright Vacuum

Fantom FM741B vacuum cleaner user manual - Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum


... Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum

Fantom Lightning canister vacuum manual needed. Fantom Vacuum closed in 2002 and I need help finding a free manual for model number: BPSRLC51


... Fantom Vacums Lighting Canister Vacuum

Looking for a manual for the Fantom Fury F10051


... Vacuums

Fantom vacuum vacuum starts running fine at first,but after about 15 mins the suction stops but the vacuum continues to run


Sounds like a partly clogged filter ... Fantom Vacums FM741 Twister Bagless Upright Vacuum

How do i replace the belt on my vacuum - Fantom Vacums Cyclone XT Upright Vacuum


There are two black screws on the back of the hood top that need to be taken out and then the top hood will come off forward. Then you can see the belt and rollerbrush. Slide to rollerbrush out and put on a new belt to the motor pulley and then put ... Fantom Vacums Cyclone XT Upright Vacuum

Fantom twister wont work light is on - Fantom Vacums FM780 Twister 700LX Upright Vacuum


When you say, "just stopped", did the MOTOR stop operating and there's no sound from it at all? Or, is the motor still working or sounds like it does, and it stopped vacumning?\015\012\015\012If the MOTOR stopped, most likely there is a ... Fantom Vacums FM780 Twister 700LX Upright Vacuum

I have had my Fantom Lightning vacuum for about 12 years and the power head motor has burnt out. I would like to know how to purchase a new power head as I just love my Fantom. How much are they and can I still buy one?


There are no parts \015\012you can try and find used one\015\012if your in my area i have a used one in stock ... Fantom Vacums Lighting Canister Vacuum

FREE USER MANUAL FOR FANTOM FM310K VACCUM - Fantom Vacums Vacuums


... Fantom Vacums Vacuums

Bags for fantom power pet vacuum fm 765 mc31 - Vacuums


... Vacuums

How to take apart vacuum to change the belt on a F 10051 01 Fantom vacuum


... Vacuums

Telescopic handle I don't think I have the exact same vacuum, although mine is a fantom upright bagless. I can't get the telescopic handle to stay in place. It pulls out whenever I try to pull back the vacuum. Any tips would be helpful! Thank you


Sometimes the locking mechanism for the wand wears out, make sure u have it all the way in and look where it locks and see if it looks worn ... Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum

BELT FOR FANTOM FM766h - Fantom Vacums FM744H Vacuum


... Fantom Vacums FM744H Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0554 seconds