Having problems with your Fantom Vacums XT450K Upright Vacuum ?

How do I change the fantom fury belt?

\015 I bought a used fantom fury and the belt soon busted. How do I get to and replace the belt?\015

Answers :

Fantom Vacuum site. Find the Model #-usually
\015\012on the back of this model,type it in and you can
\015\012read and look at diagram .Good Luck.
\015\012Belt ordered at Totalvac.com.
Repair Help & Product Troubleshooting for Fantom Vacums XT450K Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I change the fantom fury belt?


Fantom Vacuum site. Find the Model #-usually\015\012on the back of this model,type it in and you can \015\012read and look at diagram .Good Luck.\015\012Belt ordered at Totalvac.com. ... Fantom Vacums XT450K Upright Vacuum

I have a Fantom Fury and need to replace the belt. Please tell me how to get into it so the belt can be replaced. It is a Fantom Fury Vacuum Cleaner # 3680093 Fantom Technologies Model # F10051 01


... Vacuums

Fantom fury vacuums


Most power heads have some screws from the bottom to take out, the the top comes off, then you can get to the belt. ... Fantom Vacums Lighting Canister Vacuum

Change my belt on a fantom vacuum model number is f1420gf


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=766591\015\012Generic problem for all Vacuums\015\012Change my belt on a\015\012Posted by sylvester021 ... Vacuums

Eureka Fantom Thunder 12V/older model Need instructions on how to change belt and headlights.I could only find 1 screw on the bottom plate none on top plate. Thanks N J


There are two screws on the Fantom Thunder (It was not made by Eureka though) on the back of the unit just above the rear wheels. Remove these two screws and the top cover can be removed to get to the brushroll, belt and headlights. I believe the lig ... Vacuums

I have a fantom power pet model #fm722c how do i get inside to change the belt or remove the dirt from inside as well as the vacuum is not sucking the air thank you gail glandon


I have just cleaned out my filter and now it does'nt go back together?????Please help asap. It is a power/pet model ... Vacuums

How to take apart vacuum to change the belt on a F 10051 01 Fantom vacuum


... Vacuums

Have a fantom 12 amp vacuum cleaner and can't figure how to change the belt. I am afraid to try to force anything for fear of breaking the case. any help would be appreciated. Thanks,FRANK in N Y


... Vacuums

My Fantom Fury upright beater bar stopped working.


Hi at the bottom of the vac were the roller brush is there is a cover you would have to take that off and then you will see were the belt is located ... Fantom Vacums XT450K Upright Vacuum

Where can I find a belt for my Fantom Fury vacuum and how do I replace it?


You can get replacement belts and view the manual here:Fantom Fury Replacement Belts and Manual ... Vacuums

Need to change the belt on model #FC285HL - Fantom Vacums Cyclone XT Upright Vacuum


Http://www.fixya.com/support/p12053-fantom_vacums_cyclone_xt_upright_vacuum\015\012\015\012there is a pro waiting to help you live ... Fantom Vacums Cyclone XT Upright Vacuum

Fantom fury vacuum


HOW DO I CHANGE THE BELT ON THE FANTOM® THUNDER® AND FURY®?\015\012\015\012\015\012\015\012\015\012\015\012\015\012 ... Fantom Vacums Lighting Canister Vacuum

How do I change the belt on a fantom cyclone xt?


... Fantom Vacums Cyclone XT Upright Vacuum

I have a Fantom 500 DX and it seems that it doesn't pick up anything anymore. It looks like machine is working well, but it doen't pick up. I would like to take to the repair guy, but I don't know where to find one. Machine is good, it might need jsu some maintenance. Please advise. I live on Long Island, NY. PLease advise. I changed the belt about 6 months ago, but all other parts are original.


The type of bagless that has sharp turns in the hose and plastic parts are easy to become stopped up. You have to follow the path of the air flow to find the blockage. ... Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum

How do I change the belt on a fantom power pet vacuum


... Vacuums

I accidently ran over a sock while vacuuming underneath my bed and the belt broke (brush does not rotate now). I've always changed the belts in my vacuum cleaners, but the Healthy Home manual states that I need to bring it into a shop so that a professional repairman can change it. I find this ridiculous and now wish that I never bought it. How do I change the belt myself? PS I have already bought a replacement belt.


... Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue

Changing belt Please advise how to change the belt. I wasn't the person who took the belt off, didn't watch. Now it's just me and the belt. I had 2, but 1st one burnt right off. Apparently I didn't have in the right spot! don't want to waste the only other new belt I have. Pictures would be greatly appreciated!!!!!!! Thanks Tammy Can call 920-660-0680


Step 1: Lower handle to floor to change belt Step 2: Remove the two screws from the top hood on the footStep 3: Lift hood to remove Step 4: Lift right end of brushroll (the belt end) Step 5: Remove and discard belt.Step ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Broken Belt for Fantom Crosswind 600XL


Hello, your Fantom vacuum will take a Panasonic U vac belt, to replace it, their are two screws in the back, one on each side of the back of the housing, take out the two screws and lift off the top hood, and the vac belt is on the side, remove the ... Westinghouse WST1550 Wired Deluxe Upright Vacuum

Change belt How do I change the belt. I took the bottom off and removed the roller but can't get the rest apart to get to the place to hook the belt on the the drive.


... Hoover U4270-930 Vacuum

How do I change the belt on the side. Have a Bissell Power Lifter. The belt broke and i cannot get it changed. HOW do I change it?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Changing belt how do you change the belt on the power steamer there is nothing on bissells webiste i need to change the one on the sie not the rollers


Take the water and solution tank out of the machine. turn it over an on the left hand side you will see a red clip with a screw in it. take out that screw. flip the unit back over and take off the belt access cover by sticking a straight screw dri ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

MY VACUUM ISN'T PULLING AS STRONG AS IT USED TO SO I THINK IT NEEDS A NEW BELT. I CAN'T FIND THE MANUEL ON IT SO I NEED SOME INSTRUCTIONS ON HOW TO CHANGE THE BELT. I DON'T WANT TO BREAK MY VAC. CAN SOME ONE PLEASE INSTRUCT ME ON HOW I SHOULD CHANGE THE BELT PLEASE. TYPE VAC: EUREKA THE BOSS WHIRLWIND LITE CYCLONIC POWER CANISTER TYPE VAC. THE HANDLE IS DETACHABLE TO CLEAN IN THE CORNER WITH A SMALL EXTENSION.


You can get Eureka replacement belts here:Eureka Vacuum Betls ... Vacuums

My Fantom Fury vacuum does not pick up dirt. [The


You will have a blockage in the vacuum hose. Take it of and outside and push the garden hose from one end to the other. ... Fantom Vacums XT450K Upright Vacuum

I have an 6 month old Dyson 33. Likely need to replace clutch asymbly but still need to change belt's. How do you change those belts without buying another new vacume? Can not remove clutch asym


Here is a video of the dyson clutch change on DC07 witch is the same for DC33 ... Dyson DC-33 MultiFloor Upright Vacuum Cleaner

Fantom cyclone belt status light


The belt may have stretched to the point that it won't turn the brush roll, you might try a new belt and hope that fixes it. Parts for these older Fathoms are scarce and are obsolete. ... Fantom Vacums Cyclone XT Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0481 seconds