Having problems with your H2o TR220002 Steam Cleaner ?

Can i get my H2O X5 steamer heater replaced or fixed

Answers :

Repair Help & Product Troubleshooting for H2o TR220002 Steam Cleaner

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can i get my H2O X5 steamer heater replaced or fixed

... H2o TR220002 Steam Cleaner

H2o mop The small plastic tube, which is housed inside the hand held steamer is broken, where can I get a replacement in UK?

... Reliable Steamboy T1 Chemical Free H2O Steam Floor Mop with 6

I was replacing the belt on my Eureka Smartvac 4870 and one of the felt gaskets (or part of it) popped out. I thought I put it in correctly, but the first I used it after replacing the belt, the gasket got mangled by the brush. I'm wondering how important it is to get fixed; is it a part I can pick up anywhere and fix myself? Thanks for the help.

I'm no expert but if you mean the felt on the roller, you have to replace the roller (expensive,esp. for such a minor part). So. I found some felt with adhesive in the craft section at Wal-Mart, trimmed it to fit and done deal. Felt reduces friction. ... Eureka Smartvac 4870 Bagged Upright Vacuum

We bought a new home in march. It is a brand new home, with brand new First Alarm smoke/CO detectors. The very first night, we noticed the iving room (main) smoke alarm was "chirping". So we tried to replace the batteries, but when we did, all of the smoke alarms started going off (they are hardwired). We took out the new battery & dealt with the chirp. It is getting to be too much. So we are trying to fix it, but everytime we replace the batteries, the alarms are silent for a little bit, & then

... Vacuums

My bissell brush band has come off and wont stay on thus the brush will not turn, there is also a black arm type thing on a spring inside (on both sides) on the pump belt side it has broken - the side where the brush belt is, help im searching for parts and a way to fix it but im getting no joy, incidentley the brush belt thickness looks way to thick for the small thickness for the brush belt cog (?) to stay on........am i missing something? so i need to get the arm thing replaced plus find a

... Bissell ProHeat Deep Cleaner Upright Vacuum

Bissell lift off vacuum about 4yrs old. Extremely noisy. OK until before Christmas but getting worse every time it's used. Washable filters washed, HEPA filter replaced. brush bar cleaned of every scrap, hose empty,everything that can be cleared has been. Noise high pitched, screeching and can only bear to use it for a few seconds at a time. Suction OK. Mine is so loud I can't use it very long-high pitch screech. Can this be fixed or does the whole vacuum need to be replaced? It still cleans gr

Sounds like a bad motor. Could be either foot motor or main motor either way cost will be more than half of the unit. ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Dog hair gets caught all the time in the belt drive spool, is there a fix for this other than having to pull it out all the time by hand? I have replaced the belt and the brush but this hasnt solved the problem and the belt moves so slowly and I get the loud whining/grinding noise too.

It could be either the clutch, the beater bar or the brush housing. I have included links to each parthttp://platinumvacuum.com/dyson-dc07-dc14-clutch-assembly-900252-04.htmlhttp://platinumvacuum.com/dyson-dc07-dc14-brushbar-assembly-9041 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

To : admiralstopf I have a U-Line clear ice maker UCLR2060B40. The authorixed service center has been trying to fix my unit since October to March. They have replaced the circuit board 2x and the Thermister and rain tube. They clai they were able to get it to work on their bench (not sure if true) but they can not get it to work in the house. They gave up and refunded my payment. Now what? Jonathan

Unfortunately we are not affiliated with any manufacturers. What I would do at this point is to contact the manufacturer of your ice maker and let them know what has transpired when you attempted to have their authorized repair center fix your issue. ... Vacuums

The hose attachment for my DSC00009 ultra steamer has come apart and no longer works. how can i get a replacement or have it repaired?

... Domotec SF290 Handheld Wet/Dry Vacuum

I have a dirt devil 110005 that quits after about 5 minutes of vacuuming. Is it getting hot, or is there a part I can replace that will fix the problem.

... Vacuums

Where do I get tras deluxe steamer head replacement

... Vacuums

Wondering if the head is plugged up because it makes a sound like air is escaping somewhere. I've replaced the original cloth bag with a comparable "O" paper bag from Sears. I tried to see if there was a clog in the hose by placing a broom handle in the hose to see if something would loosen. I also cleaned the filter and the air filter. If the head is plugged, how can I fix it? We can't get the vacuum apart. Thanks.

I had this problem, but suction improved when the attachments were properly secured in their holders. ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Hi I have a panasonic SD251 bread maker. The circlip for the bread pan has broken and I have not been able to purchase a circlip small enough to fix it. Any suggestions on how to get a replacement circlip would be greatly appreciated. Even the size of the circlip required would be helpful

... Vacuums

I have a HeatStream Alert 3000 that has been the best little heater I've ever owned. Are they still available? Is there a close replacement available? Where can I get one? Thanks, Carl

Hello, I have one that I am selling. Let me know if you are interested. Great condition. ... Vacuums

I have a Hitachi food steamer and the rings that connect to the bowls have broken. Can I get replacements please?

... Hitachi Vacuums

Power nozzle on E-series won't start when cold unless the red 'reset' button is pressed multiple times while also holding the trigger to 'warm it up'...this is w/the power nozzle off the floor - no restriction on it turning. Once it's been running and then turned off the button must be pressed w/the trigger to get it to run - again w/the nozzle off the floor. It also seems to shut off too easily while vacuuming. I replaced the motor,which didn't fix it. Is the reset switch next on my list? T

... Rainbow E series Canister Wet/Dry Vacuum

My scunci steamer fell off while collectin the power cord it broke its can it be plastic body around the triger can it be fixed? can it be replaced?

If the steamer still functions... use some glue that would be resistant to heat and works on plastic... i'm drawing a blank at the moment as to what glue would work. actually when i read that again... it broke it's can... you mean cannister ?\ ... Scunci 52067 Handheld Steam Vacuum

Sunbeam water cooler YLR2-5-87 H3 I find a part inside is distorted I guess from the heater is sunbeam doing anything for this problem which seems to be a problem and can you get parts to fix it

... Sunbeam Vacuums

Steam Vac F8571-900 hose if broken off at the point where it enters the machine. Can I replace it or where to get it fixed in Bemidji MN area

It will have to be replaced, need to see a service center for vacuums to get the part may cost around 50 dollars for the part. ... Hoover Vacuums

I put the fAN REMOTE IN the WASHER ON ACCIDenT AND NIW IT WONT WORK WHERE Cn a get a replacement or how can i fix it

Hi,if your lucky enough that no electronic parts get damage inside you can still repair it yourself.Don't put new battery first because it is still wet inside.Open your remote and remove the electronic parts or board ins ... Vacuums

The gear that turns the belt on my bissell power steamer model 1697 m has come-off.Can it be fixed or replaced, and can i do it myself.??

I had the same problem and went to bissel .com and they sent me a parts replacement catalog,it was easily replaced, but before spending the $,bring it to your local vac repair shop and see if the bolt just came loose.r ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Have a Bissell Power Steamer Upright Deep Cleaner - Dirt Livter PowerBrush. Model 1895 The water tank 'must' have been dropped and is cracked too much to use. Can I get a replacement?

... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

I have an elna 614DE overlocker and although there is power (light on) when I press the foot pedal, nothing happens. Is this a fixed unit which can't be repaired? If so, where can I get a replacement?

I have the same machine same problem did you get it working and if yes what did you do. ... Vacuums

The top front corner of the rake assembly on our Littermaid Mega box is broken off. Where and/or how can we get a replacement assembly to fix this. Because the piece is broken off, the "wheels" on that side do not like to stay in the rail and the rake doesn't work properly.

... Vacuums

The power cord on a flat iron broke/got chewed through and needs to be replaced. how can I open it to get at the cord or fix the cord?

... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9633 seconds