Having problems with your Hayden Industries SuperVac 6000 Central System Vacuum ?

I moved into a condo with a Hayden SuperVac and it's very noisy

\015 I recently purchased a condo with a Hayden SuperVac 6000+. It's about 10 years old. It has great suction and performs well, however, it is extremely noisy. Note: When I move in and looked into the canaster I was appalled. I don't think it had ever been cleaned or emptied in 5 years! It works well now. Is there anyway I could make it quieter as it sounds like a 747 taking off. \015\012\015\012Thanks, Ray Shergold \015\012 Victoria, B.C. Canada\015

Answers :

Repair Help & Product Troubleshooting for Hayden Industries SuperVac 6000 Central System Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I moved into a condo with a Hayden SuperVac and it's very noisy


... Hayden Industries SuperVac 6000 Central System Vacuum

Hayden Supervac 3600


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=11860&thid=808510\015\012Hayden Supervac 3600\015\012Posted by kdm0 on Jul 20, 2008\015\012Hi, I have a Hayden Su ... Hayden Industries SuperVac 3600 Central System Vacuum

Heating system wont shut off by itself. - Hayden Industries SuperVac 6000 Central System Vacuum


... Hayden Industries SuperVac 6000 Central System Vacuum

Hi there where can i buy a replacement dust filter for my Hayden Supervac 3600 thanks.


You can get the filter and other parts off the link belowhttp://www.totalvac.com/hayden-central-vac.html ... Vacuums

Green light blinking - Hayden Industries SuperVac 3600 Central System Vacuum


... Hayden Industries SuperVac 3600 Central System Vacuum

Hayden SuperVac central vacuum making an unbelievably loud noise.


Stop using the vac. Remove the filter and clean thoroughly, inspecting for damage. If the vac is spiting out bits off fuzz or lint it may need the motor cleaned and serviced as dirt has leaked past the filter. If it is spewing black, not gray this is ... Hayden Industries SuperVac 3600 Central System Vacuum

I have a hayden premier supervac central vac system, while working on the switch in for the beater bar, the actual unit has turned off, the green light is no longer lit, is there a fuse on it somewhere or a reset button, i have tried unplugging it and replugging it in, but can not seem to get it to power up now?


Should be a reset on the main unit near the top ... Vacuums

My hayden supervac premier central vac turns on and off every second with a blinking green light on the front of the unit. What is causing this?


... Hayden Industries SuperVac 6000 Central System Vacuum

The brush on my hayden 6000 supervac is not rotating when power is on and i can't figure out how to open the vac to get to the belt. help please


First you will want to remove the light cover. this can be done by pusing as you look at the front of the powerbrush on both the left and right side of the head. There you will find the lightbulb and 2 screws to remove. Remove both of the screw ... Hayden Industries SuperVac 6000 Central System Vacuum

Show me how to replace the belt - Hayden Industries SuperVac 6000 Central System Vacuum


If you go to this URL: http://builtinvacuum.com/parts/motor/116765.html\015\012\015\012You will find the motor for the vacuum you are referring to. In some of the previous pages in the URL you can see that there is no reference to belts. Lo ... Hayden Industries SuperVac 6000 Central System Vacuum

I have vax 1800 pet vacuum. It is picking up fine but very noisy. I have replaced the belt in the past and the noise started then. On looking at it closely today I noticed brushbar was getting worn where it slots in at the side so I suspect it wasn't fitted in properly after replacing the belt. Now in properly but still making terrible noise. There is a bit of a rubbing noise when brushbar moved round. Do you think the brushbar needs replaced? How do I lubricate the bearings to try that bef


Spray the end of the brush-bar were the bearings are with WD-40 if that solves the problem replace the bearing when it starts screeching.. ... Vacuums

I have a Hayden SuperVac 3600, almost 10 years old. The unit still runs, but now when I switch to the power nozzle, it doesn't have power to turn that. I think this happened once before and maybe they replaced a circuit board(?). We took it to a local repairman this time and he says he can fix it temporarily with a new cartridge, but that he won't promise it won't happen again soon.....


The hose has fuseable link inside, generally a 3-7 amp. It is at the wall end underneath the hose cuff. Easy to replace as it crimps in line. If you have a meter you can also test the detachable hose to wall cord for continuity, then check the hose t ... Hayden Industries SuperVac 6000 Central System Vacuum

Where can i get mother board from? - Hayden Industries SuperVac 6000 Central System Vacuum


Call 866-972-8227 and we can order it for you \015\012\015\012http://evacuumstore.com/default.aspx ... Hayden Industries SuperVac 6000 Central System Vacuum

Supervac never comes fully on


Wireing from wall mount to vac ... Hayden Industries SuperVac 3600 Central System Vacuum

Hayden Supervan stopped working


... Hayden Industries SuperVac 3600 Central System Vacuum

Needle rubbing I have a singer pro finish and recently I broke a needle and the lower looper also busted clean off. I ordered the lower looper and replaced the broken one and changed both the needles. Now when I turn the hand wheel and the lower looper moves to the left and the needles descend they pass in front of the looper but when the needles begin to move up and the looper moves back to the right the needles bend back and go behind the looper. Help! Thank You!


... Singer 14CG754.CS Pro Finish Industrial Commercial-Grade Serger

The brush roller on my vacuum will not move. I've cleaned it, checked the belt, but when I put the roller back it, it will not move...almost like it is in a locked position. Everything has been done correctly from the book yet, it still does not move. Any help PLEASE?


... Electrolux EL8502 Versatility Bagless Upright Vacuum

The roller brush is not moving the vacuum has suction it's just the roller is not moving. The belt is not broke i can see it is still intact. I was sweeping and i noticed it just stopped moving.


... Dyson DC28 Animal Bagless Upright Vacuum

My Roomba will not move forward. It will try and spin itself and then try to move forward but then spin itself again until it stops and beeps. I tried cleaning the whole unit but it still is unable move forward. Help please!


Heyis it 5xx Roomba ? is it 9 beep that it sounds ?Please look for other same problem posted here ;-)You are probably facing a bumper sensor issue.Try to clean the bumper first and if this goes ... iRobot Roomba 530 Robotic Vacuum

I have a Series 90L Wet /Dry vac.The "on/off" buttons will not move. The switch is fine--I opened it up and tried the switch directly, and it works. I put the top bnack on, and the "on/off" buttons will not move. They do move freely when the top is off. What do I do now???


I am sure there is a safety switch causing the switch not to come on,make sure the top is on correctly,and latches are good and tight. ... Shop Vac Vacuums

Brushes won't move on the floor but will move when they are picked up and moved to start


Sounds like the belt is heavily worn and slipping or has not properly been put on. Check the belt and reinstall or replace dependin on the condition. These will wear over time as well you have 2 belts and I would recommend replacing em both. One tu ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Hayden Vac2400 my hayden 2400 does not have any suction and it smells like something is burning, is it the motor?


Check the carbon brushes, they maybe worn out and need replacing. ... Hayden Industries SuperVac 2400 Central System Vacuum

Hoover U8185-900 motor shuts off when you move the cleaner forwards but it runs when the cleaner is moved backwards


... Hoover U8185-900 Upright Vacuum

Roomba 4270 stops too soon. my roomba got weird all of a sudden. it started not moving all over as it should. so I tore it all down as I had done before and cleaned all the hair and dirt out of every thing I could without getting down to the basic shell. it does work now and does move all over but stops after about 10 minutes. brand new battery so not a battery issue. could I have plugged some of the sensors in the wrong 'plug'


... iRobot Roomba 560 Robotic Vacuum

Not moving turns on but wont move


I guess you mean the pickup bar if so sounds like you need a new drive belt ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0259 seconds