Having problems with your Hoover Elite Rewind Pet Bagless Upright, UH71003 ?

The belt on my Hoover Elite Rewind UH71003 keeps coming off.

\015 I purchased it yesterday, the suction is great but so far the belt has come undone twice, and I haven't managed to vacuum an entire room yet.\015

Answers :

Those machines come half way across the world. The belt stretches while it waits. Buy a new belt for it and you'll be good as new.. actually better.
Here's a full length description of why.

http://www.vacuummedic.com/blog/2012/10/09/my-brand-new-vacuum-doesnt-work/



Good luck!
Repair Help & Product Troubleshooting for Hoover Elite Rewind Pet Bagless Upright, UH71003

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The belt on my Hoover Elite Rewind UH71003 keeps coming off.


Those machines come half way across the world. The belt stretches while it waits. Buy a new belt for it and you'll be good as new.. actually better. Here's a full length description of why. http://www.vacuummedic.com/blog/2012/10/09/my-br ... Hoover Elite Rewind Pet Bagless Upright, UH71003

Hoover elite rewind belt keeps coming off - Hoover Vacuums


... Hoover Vacuums

Where can i find a belt for a hoover elite rewind uh71003 brand new first time use


... Hoover Vacuums

Loud noise coming from motor on hoover elite rewind vacuum


... Hoover U5507900 Elite Rewind Bagless Upright Vacuum

Hoover Windtunnel - the belt keeps coming off & it is the correct


One compatible belt that I use and works (at least while its new) is Royal 104425001. Try that. ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

Windtunnel belt I have a new Hoover Windtunnel canister. The belt keeps coming off. It happened a couple weeks ago (several times after putting the belt back on) so I assumed I might need a new belt as it might have dried out at the store. I ordered new belts and today I used it for about an hour and the belt came off again, twice. There doesn't seem to be anything to hold the belt on the stem as it seems to slip off. I have tried it centered, to the left and to the right....can you help. I am v


I've successfully used a compatible belt - Royal 104425001 .It's still new, but for the time being at least - it works. ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

My hoover elite belt comes off within 5 seconds of turning it on


Those machines sit in the box in transit across the world and waiting for purchase. In time the rubber stretches out from just sitting there. In the old days they packed the belt separate from the vacuum and you had to put in on yourself. Today's buy ... Hoover Elite Rewind Bagless Upright VacuumVacuum

Is there any way to repair or replace the belt GUIDE on the inside of the belt compartment of a '97 Hoover Wind Tunnel (not self-propelled)? It became twisted when a belt broke and now the belt rubs against it and sounds really weird, and I'm sure new belts will continue to break.. This guide is a long piece of molded material (part of the compartent wall) to keep the belt from coming off the pulley. It also had a sort of metal clip on it. It was loose and I took it off because of the way the pa


Honestly you should take it to a vac.shop they can fix any vac. ... Windsor SR12 Sensor Bagged Upright Vacuum

Hoover Self Propelled Wind Tunnel. Keeps throwing off drive belt. New belt. Starts up fine, as soon as you release and lower handle, belt comes off spindle


Hi, it sounds as though that when you release the handle, I no this puts pressure on the brush or spindle, this is causing the belt to come off. You need to remove the roller brush and check it for any thing that may have rapped around it causing it ... Vacuums

Hoover windtunnel vacum..belt is rotating..brush is not..plus belt keep coming off


More than likely, there is hair or fibres caught up in the bearings binding them. There are usually 2 screws you can remove on the bottom of the vaccume that allow you to remove the plate. The back part of the plate usually locks in with tabs. Remove ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Replace broken belt on a Hoover Elite Rewind. Removed bottom panel, how do I remove brush to put on new belt?


I have the agitator belt style 190 for the Hoover elite rewind I put it on and the belt broke again what do I do help carpet needs cleaning. ... Hoover Elite Rewind Bagless Upright VacuumVacuum

Hoover Wind Tunnel - Belt Keeps Coming Off


This is the same problem I had. We took it to a vacuum repair store and they fixed it for $80.00!! It lasted about 6 months and it just happened again. I'm not spending the money - I'm looking for another vacuum cleaner. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Hoover Elite Rewind belt part number , is this the correct one?


Yes, that is the correct belt. The full part number should be 38528040. This is the correct belt and should fit your U5509/U5507. ... Hoover Elite Rewind Bagless Upright VacuumVacuum

Hoover Elite Rewind


... Vacuums

Hoover U6634-900 self propelled, brush belt keeps coming off.


Unfourtunatly it could be the height of your carpet also using on area rugs could cause it to do that too. check the brush roll and make sure it is spinning freely. ... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

HOOVER WINDTUNNEL VACUUM MODEL U6454-900 BELT KEEPS COMING OFF


Have you put on a new belt or just keep using the old one. If you haven't replaced it in the last 6 months, then it has stretched to the point where it won't stay on. Another cause is catching throw rugs, towels or something that gets in there and ... Hoover Vacuums

What type of belt does a hoover elite rewind model number UH71009 take?


... Hoover Elite Rewind Bagless Upright VacuumVacuum

Overheating motor won't run - Hoover Elite Rewind Pet Bagless Upright, UH71003


... Hoover Elite Rewind Pet Bagless Upright, UH71003

Poor suction - Hoover Elite Rewind Pet Bagless Upright, UH71003


... Hoover Elite Rewind Pet Bagless Upright, UH71003

My vac is really loud now is that the belt?? - Hoover Elite Rewind Bagless Upright Vacuum - Ferrari Red Metallic


Sounds like the brush roller is worn and making noise, take the complete vac to the repair shop for service. I've seen this cause damage to the front nozzle housing as well. ... Hoover Elite Rewind Bagless Upright Vacuum - Ferrari Red Metallic

Hoover elite rewind uh71003 no suction


... Hoover Elite Rewind Pet Bagless Upright, UH71003

My hoover elite rewind is making a louder noise and I can smell something burning when I use it. I have replaced the belt but this did not help.


The smell is either the motor or the belt, if motor hope it is under warranty, if belt make sure brush roll spins freely and replace belt, if brush roll not spin freely replace it first ... Hoover U5507900 Elite Rewind Bagless Upright Vacuum

Hoover elite rewind uh71009 manual - Hoover Elite Rewind Bagless Upright Vacuum - Ferrari Red Metallic


... Hoover Elite Rewind Bagless Upright Vacuum - Ferrari Red Metallic

How do you reattach the front rollers on hoover elite rewind so that the carpet height adjustment works


... Hoover Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0983 seconds