Having problems with your Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum ?

How do you change from tool attachments to floor?


Answers :

On the front of the recovery tank is a slide-out piece. lift up and out (or down-depending on your model). On the end of the hose is a piece the same size and shape as the one on the tank. Slide it down in the slot in the recovery tank. You'll see a little push door labeled
"upholstery and floor attachment". Push down on the top of the door to open it. Then take the hose attached to the piece inserted in the recovery tank and push it into the upholstery and floor access door.
Repair Help & Product Troubleshooting for Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do you change from tool attachments to floor?


On the front of the recovery tank is a slide-out piece. lift up and out (or down-depending on your model). On the end of the hose is a piece the same size and shape as the one on the tank. Slide it down in the slot in the recovery tank. You'll se ... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

HI, I have a Kenmore 25813 and it seems like there is an intermittent short. When I have the extension wand on and the power floor attachment on, when it rotate the wand the light cuts out and so does the power floor attachment, when I twist it back it comes on again. I don't have this problem if I remove the wand and just use the crevice tool with the hose. Any idea where the short might be and can I fix it myself? Thanks. Gary


This is common you may have a short in the contacts from the handle to the wand or a break in the cord that goes into the powerhead ... Kenmore 25812 / 25813 Progressive Bagged Canister Vacuum

I have an electrolux renaisence vacuum. the brush in the floor attachment turns but I have no suction. When I change to bare floor option on the handle the brush stops turning (correct) but I still have no suction. The lights on the handle showing --floor,carpet, high and low all work.


Sounds like you have a clog, either in the hose or the inlet by the brush roll. ... Vacuums

Fully charged, the power pulses on & off when the floor tool is attached.


... Dyson DC31 Animal Bagless Handheld Cyclonic Vacuum

I need to change from tools to floor


Happy to help. Please use this link to the manual:\015\012\015\012http://www.hoover.com/pdfs/manuals/F5871900.pdf ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

I have a Hoover steam vac Model #F5865-900. I am unable to have the cleaning mode change from tools to floor when lowering the handle release. I hear a click, but the indicator stays on tool. I need to know how to get to the assembly that controls the cleaning mode.


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Hard floor tool attachment- how to attach????????


Go to bissell.com ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

I have the DC28 Animal model. When I attach the articulating floor tool, the hose suctions itself closed and the attachment doesn't work. Is there an adapter I need??


... Dyson DC28 Animal Bagless Upright Vacuum

I have a Hoover SteamVac F5914-900 SpinScrub... The last time I used the hand tool attachment, it worked fine. Just tried to use it again, and now I only drips of water will come out of the hand sprayer, if that. I have tried prepping it for up to 15 seconds like the manual says... no luck with that. Also it is making a big puddle on the floor, probably because the brushes on the main unit keep spinning when I am trying to use the hand tool which I dont think they are supposed to do? Can a


The brushes can be turned off on most of them via a switch on the hood. There shouldn't be water coming out onto the floor unless you are pulling the trigger at that top. You probably broke this when attempting to use the tools. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

My new Kenmoore Powermate 116 canister has poor suction. I have no pets and light dust. Its not picking up small particles on the wood floor with the floor attachment. When I put my hand to the suction it feels weak. Cleared hose and changed bag. Using again, same issues. This should not be happening with a new vacuum. Is it a bad design in the elbow joint of the hose? I want to return this!!!!


First of all disassemble the handle and hose as much as possible and examine the inside. Make sure there is not any significant debris lodged in the hose somewhere like a plastic bag or something.\015\012\015\012Also check at the top of t ... Kenmore 23912 Progressive PowerMate Bagged Canister Vacuum

I have a model F602-900 and it show it is in the tool mode. How do I get it to change to the floor Mode?


... Hoover F6020-900 SteamVac Upright Vacuum

I have a Hoover SteamVac Spot/Deep Cleaner, model F5515. I've had it a little over 1 year. It will not extract dirty water from the floor. I've made sure the recovery tank is attached correctly and also that the stair tool is connected. Is there something else I can try??


... Vacuums

Where the HELLis the switch to change from tool to floor use?????


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Dyson DC14 won't change suction from hose to floor tool after hose is replaced in handle


Try cleaning everything in the vacuum cleaner, hoses and filters and where you collect the dirt. Something must be plugging it up. If you have any brushes check to see if thread or hair is rolled around into it. ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Steamer Instructions I want to know how I can change it from the floor to be able to use other attachments that came with it


What make and model steamer? ... Vacuums

I have a kenmore model 11625512506 vacuum cleaner. The problem is when I select "floor" on the handle it does not turn on, it only turns on if I select the "carpet" function and it is attached to the Power Mate. This means that I can not use any other tool or function other than the carpet one.


... Kenmore Vacuums

No spray My Bissell Pro Heat 7901 will not put out any spray. I Took the pump out so I could get at it and disconnected the hoses. I put the one on the input side and the other in a bottle of water. Put the belt on the pump and turned on the machine .Nothing at all coming out of the pump. Where can I get a new pump? Also the lever that goes to the little flapper at the top under the clear plastic piece on the front that connects to the knob that changes from tools to floor broke off. Where can I


Search for bissell pro heat pump. bissell.com will not have it ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

No spray My Bissell Pro Heat 7901 will not put out any spray. I Took the pump out so I could get at it and disconnected the hoses. I put the one on the input side and the other in a bottle of water. Put the belt on the pump and turned on the machine .Nothing at all coming out of the pump. Where can I get a new pump? Also the lever that goes to the little flapper at the top under the clear plastic piece on the front that connects to the knob that changes from tools to floor broke off. Where can I


Pump part number is 2107181, the diverter valve # 2136988. You can Bissell and they can tell you who may have parts near you, or you maybe able to order thru Bissell.com. Before you took it apart, were you getting water to spray out of the hose. I ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Floor attachment starts (green light) and then, almost immediately stops (red light). I have cleared all built-up dust in the unit, but no change occurred as a result.


Step on the blue lever at the base of the floor attachment to separate it from the long wand. Sometimes there is a clog inside at the base that needs to be cleared. Good luck. ... Fantom Vacums Lighting Canister Vacuum

Little suction and pours water underneath machine on the floor. This all happens while i am using the hand attachment tool, but also occurs when i tried just the machine is running..what am i doing wrong. it is new..only used once about 6 months ago


Press the handle release kick-button with your foot, extend the handle all of the way back, and take a look at the gap between the base of the unit and the handle/reseviour assembly. You should see several black hoses attached to the base and running ... Hoover F6212-900 / F6215-900 SteamVac Agility Upright Vacuum

Control knob for bissell carpet machine came off to change from floor to tools


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 8910 ProHeat Clear View Upright Vacuum

Powr-flite PF600BP-PF1000BP: how to attach and maintain the floor tools to the hose?


... Vacuums

Cant figure out how to use the hose attachment,it connects at the top at the duster and at the floor,how do i change it to use the hose only?


... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

It won't **** up water except with tool attachment


When you took off thew clear nozzle, you must have lost the black oblong gasket that sits at the junction at the top for the tank lip to sit on. Without it, you lose suction at that point. ... Bissell 8910 ProHeat Clear View Upright Vacuum

I have a Lux Floor Pro Heavy Duty carpet cleaner. Whis attachments (scrubbers) do I attach to the bottom to wash a non-plush carpet. I have three attachments that have hard bristles and three that have soft bristles (they look like hard floor attachments). When I used the ones with hard bristles it sounded funny


NEVER USE THE HARD BRUSHES ON CARPET ! You can burn up your motor, break the drive belt,or strip the drive gears The black bristle brushes are for all carpet types. \015\012The hard bristle brushes are made for hardwood and other smooth ... Electrolux UltraLux 2000 Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0437 seconds