Having problems with your Hoover F5872-900 SteamVac Wet/Dry Vacuum ?

Rotating brushes don't rotate - Hoover F5872-900 SteamVac Wet/Dry Vacuum


Answers :

Check belt, may be broken or may have come off the brush bar and replace.
Repair Help & Product Troubleshooting for Hoover F5872-900 SteamVac Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Rotating brushes don't rotate - Hoover F5872-900 SteamVac Wet/Dry Vacuum


Check belt, may be broken or may have come off the brush bar and replace. ... Hoover F5872-900 SteamVac Wet/Dry Vacuum

Why did the brushes stop rotating? - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


It could be a few different reasons, 1. The belt is broken, 2. The motor has died, 3. There is an obstruction, or some such thing stopping the bar from rotating (often hair and/or string) 4. The contact switch is defective. (switch that turns beater ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

The brush does not rotate - Hoover F6212-900 / F6215-900 SteamVac Agility Upright Vacuum


... Hoover F6212-900 / F6215-900 SteamVac Agility Upright Vacuum

Brushes are not rotating - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


The Hoover SteamVac's are notorious for this exact problem. There are several things that can be causing this problem.First, what you'll need to do is take the brush block out of the machine. To do this there are 4 clips on the brush bloc ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Brushes will not rotate on my steam vac - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


I'm sorry to tell you that you have a broken drive brush. One of the brushes has a stem, and that stem is broken. See if you can remove the brush assembly - I believe it pulls straight down. See if one of the stems is a little longer than the othe ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Why did the brushes stop rotating? - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


Please check two things: \015\012(1) The shutoff switch on the hood is NOT set to OFF for brush speed.\015\012(2) Remove the red filter panel from under the cleaner, behind the brushes, and clean the hair/debris from the screen filter. S ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Brushes don't rotate - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


Hey are driven by a belt just replace it. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Brushes will not rotate - Hoover F7210-900 SteamVac V2 Upright Wet/Dry Vacuum


I can't tell for sure from the pictures, but there are two possibilities - the drive belt to the brushes broke, or the brush can't turn due to excessive hair wrapped around the shaft. If the belt is OK but the brush does not turn, you should smell b ... Hoover F7210-900 SteamVac V2 Upright Wet/Dry Vacuum

I have a Hoover Steam Vacuum, All Terrain, and the bristle brushes are not rotating. They appear to be seated properly and, the entire vacuum is clean and free of lint, hair etc., so everything is working properly except the brushes do not rotate. Any help would be greatly appreciated. Thank you.


I checked the owner's manual and the parts breakdown for your model F5807. Both showed that your model has a stationary brush strip and not rotating brushes. Is F5807 the correct model number? ... Hoover F5807 SteamVac Wet/Dry Vacuum

Brushes wont turn hoover f7412900 steam vac - Hoover SteamVac V2 6-Brush Widepath F7426-900 Vacuum


... Hoover SteamVac V2 6-Brush Widepath F7426-900 Vacuum

F5907950 Manual Hoover Steamvac - Hoover F5872-900 SteamVac Wet/Dry Vacuum


... Hoover F5872-900 SteamVac Wet/Dry Vacuum

The brushes will not rotate on my hoover vacuum. the belts are in good shape, the motor is turning the vacuum motor, but the belt on the brushes seems loose. I ordered a replacement belt but still nothing. Their is a small "idler" but their dosent seem to be enough tension on the belt. Any ideas?


Did you order the correct size of belt? These are the belts you should have:Hoover Windtunnel Belts ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

How do I change the belt on a Hoover Steamvac Model # F5905-900. The brushes are not rotating strong enough. They rotate while they are off the carpet but once you lower them to the carpet they stop rotating.


... Hoover F5905-900 Vacuum

Hoover F7412-900 brushes stopped working - Hoover F7222-900 SteamVac Upright Vacuum


... Hoover F7222-900 SteamVac Upright Vacuum

Hoover max extract brushes not turning - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

HOOVER STEAMVAC Model# F5842-9RM 120v 12 amp Carpet Cleanerworks well. Hooked up upholstrey attachment, used it. Reassembled to standard operation, the aggitator brushes do not work. I dis assembled brush insert verything good. ran cleaner and the square hole that the bushes insert into did not rotate with cleaner on. turned off lightly tried to turn mechinism in machine no luck. Reassembled aganin, reinserted cleaning tool, then disconnected it. agitator still doesn't work. toggled switch


... Hoover Vacuums

Brushes not working and brush switch is on - Hoover F7431-900 SteamVac Vacuum


The brushes for that unit turn by the suction on the machine. Please check to be sure the recovery tank is on the machine correctly and that the lid is on the recovery tank correctly. \015\012 \015\012If the lid is on correctly, ... Hoover F7431-900 SteamVac Vacuum

Hoover max extract 60 brushes wont spin - Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum


... Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum

Hoover f7450100 spin brush will not work - Hoover F7431-900 SteamVac Vacuum


... Hoover F7431-900 SteamVac Vacuum

Hoover SpinScrub brushes not turning - Hoover V1 SteamVac SpinScrub Vacuum


Hi There,Here's a very helpful Tip that I've written that explains step by step how to diagnosis the Hoover SteamVac when the brushes stop spinning. This will also walk you through how to replace the brush gear turbine assembly if you f ... Hoover V1 SteamVac SpinScrub Vacuum

My Hoover Steam Vac Ve brushes stop working - Hoover F7431-900 SteamVac Vacuum


Hi There,\015\012\015\012You'll need to try and diagnosis what is causing the brushes to stop spinning first. A lot of the times this can just be caused by debris stuck in the brushes. I have written a in-depth repair solution on how ... Hoover F7431-900 SteamVac Vacuum

Hoover steam vac v2, brushes won't turn. - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


Hello,The Hoover SteamVac's are notorious for \015\012this exact problem. There are several things that can be causing this \015\012probelm.First, what you'll need to do is take the brush block \015\012out of the machine. To d ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Hoover f7452900 brushes wont turn? - Hoover F7452-900 SteamVac Upright Vacuum


Make sure that you have it on the carpet setting and not the hardwood/tile setting. also if you used the hose, make sure that the little door is closed. if all checked... remove the recovery tank, there should be a rubber grament on the stand pipe un ... Hoover F7452-900 SteamVac Upright Vacuum

Hoover SteamVac F7222-900 steamvac Brushes do not spin. Looked at filter as per manual instructions but it was free of lint. Need to fix it, help please? Vacuum was used less than 10/12 times


Solution for Hoover SteamVac (F7452-900) brushes not spinning\015\012Uses the turbine model and same solution would be similar. Root cause is simply the main gear attached to turbine becomes stuck. This problem shoul ... Hoover Vacuums

I have a Hoover Agility Steamvac and the brushes will not rotate. I have cleaned the filters and the the "brushes on" feature has been selected. Any suggestions on what else I might try to get it working?


You have a broken brush bar belt. Just simply replace it with a new one. This is very cheap and easy to fix.Pull the cover off of the bottom of the Vac and the belt will be there. If it's not broken then it is still stretched to the point ... Hoover Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1778 seconds