Having problems with your Hoover F5872-900 SteamVac Wet/Dry Vacuum ?

How do i change the belt on a hoover steam vac ultra


Answers :

Are you sure there is a belt in there? Here is a schematic.
http://www.vacshopusa.com/pdf/hf5837900.pdf

Any good vacuum repair or sales shop that does Hoover should be able to order you any part
Repair Help & Product Troubleshooting for Hoover F5872-900 SteamVac Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do i change the belt on a hoover steam vac ultra


Are you sure there is a belt in there? Here is a schematic.http://www.vacshopusa.com/pdf/hf5837900.pdfAny good vacuum repair or sales shop that does Hoover should be able to order you any part ... Hoover F5872-900 SteamVac Wet/Dry Vacuum

Solution for "the unit is making smoke rubber belt smell how do i change the belt...hoover steam vac f7225-900


There is no belt on this model. From your description, it is definitely electrical, possibly the motor. I would have it looked at a repair shop. ... Hoover F7225-900 SteamVac V2 Upright Vacuum

How do you change the belt on a hoover steam vac spin and scrub


You have to turn it over and unscrew some screws you'll see it. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Beater brushes not turning on the wife's Hoover Steam Vac model F5905-900. Found one prior ''solution'' stating that it sounded like the belt was bad. That was my original thought, but on checking schematics and trying to find part numbers at Sears Parts Direct and at Hoover, it does not appear the F5905-900 steam vac HAS any belts to begin with. What's next??


This one I can tell you about from personal experience with that generation Hoover Steam Vac. After using it about 7 or 8 times my brushes stopped turning also.I disassembled it (kind of like disassembling a Chinese puzzle box) and found ... Hoover F5905-900 Vacuum

Where is the belt on the hoover steam vac, how do you change it


There is no belt. The brushes are ran by an air driven turbine. Make sure the top recovery lid is on correctly and sealed. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover F6025900 Steam Vac Widepath LS, I own this steam vac and I found bits of rubber under the machine when I turned it on, smelled like burned rubber from a belt? Can you please tell me if there is a belt on this carpet cleaner and if so, how to access the belt? I have taken out some screws and still cant get to the belt? Thanks


Well there is no belt, and not sure what the rubber would be from, everything is plastic or metal. Unless it is really an electrical smell, which means the motor is going bad.\015\012\015\012 ... Hoover Vacuums

Hoover steam vac ultra model F5883-900 - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

No water dispenses from my hoover ultra steam vac model F5883-900 when the trigger is squeezed.


Remove the clean water tank and look in the opening just behind the black grommet. Operate the trigger - you should see the valve move downward as the trigger is pressed. If it is NOT moving, then you will need to have the trigger plunger shaft repa ... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

My hoover steam vacs brushes will not turn . could there be a belt broken? I have misplaced the manual


For the manual:\015\012http://www.hoover.com/pdfs/manuals/F5914900.pdf\015\012\015\012For the brushes:\015\012(1) Ass ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

How do you get to the belt on a Hoover steam vac?


I hate to tell you, but there is no belt at all on the steam vac line. they have a suction driven turbine to turn the brushes, and a suction driven pump for the water flow. But definately no belts. \012\012If something is not working on i ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Brushes on hoover deluxe steam vac cvarpet cleaner are not rotating. Took out the brush assy and drive spins slowly but with little torque. Cannot seem to open the bottom to see if belt or direct drive..something wrong with drive mechanism for 5 brsuhes


(1) Assure the brush shut off lever on the hood is not set to the off position. \015\012(2) Is there still a square pin standing up from the one drive brush? It should be 1/4 square, and about two inches tall. That pin is the drive from the ... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

Hoover steam vac ultra


This hose is available as a service part. \015\012Please reference this site:\015\012http://www.hoover.com/parts/?category=carpetcleanerho ... Hoover F7431-900 SteamVac Vacuum

I have a Hoover steam vac Model #F5865-900. I am unable to have the cleaning mode change from tools to floor when lowering the handle release. I hear a click, but the indicator stays on tool. I need to know how to get to the assembly that controls the cleaning mode.


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

The Hoover steam vac dual v does not spin its brushes and I dont know how to dismantel it to view the belt .


There is no belt on the steam vac - it operates on air flow. Remove the brush and insert a flat screwdriver into the square hole. If it does not turn, the turbine has seized up and must be replaced. Remember that the brush will not turn unless the lo ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hi, i have a hoover steam vac agilty. the brushes on the bottom front quit spinning. they are not locked up as i can freely turn them by fingers. is there a belt that i need to replace? if so, how do i get at it to replacec it? thank you for any assistance


The brushes on all hoover steam vacs are air opperated it uses the suction of the vacuum motor to spin a turbine and in turn spin the brushes. Most likely that path of air is clogged with hair or carpet fuzz. On the top of the machine there is a litt ... Hoover Vacuums

The brushes won't spin on my F7220-900 Hoover Steam Vac.. Is there a belt that could have broke and needs a new one??


... Hoover F7220900 SteamVac V2 Upright Vacuum

I have a hoover steam vac ultra and have no instructions,,my Mom lost them,,can you help?


Go on the internet and look up the instructions for it then print it out and keep it!! ... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

Brushes are not rotating is there a belt - Hoover Steam Vac Dual V w/ SpinScrub Vacuum


I had the same problem, on mine there is no belt, the brushes are driven by an air motor. My problem turned out to be one of the motor brushes was completely worn out and the motor was not turning at the proper speed. ... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

I need a manuel for a hoover steam vac ultra with spin scrub brushes


Hi\015\012You need to find the model number and enter it into the location bar after you follow this link which wil take you to Hoover's main U.S Site. \015\012\015\012http://www.hoover.com/CustomerService/Manuals/Default.aspx ... Vacuums

Does the hoover steam vac take a belt to turn the brushes


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

How does the bottom open on a Hoover Vac ModleU5064-930 to change the belt ?


If you flip the vacuum over there should be (4) access screws on the base plate that covers the roller brush. Remove those and you will be able to access the belt. The belt you need you can get here: ... Vacuums

Brushes Hoover steam vac f5906-900 .can,t get the brushes to work. Is there a belt that could have broke


This machine has no belts. There is an air driven turbine that propels the brushes. If you look under the little glass window at the left front corner of the machine, there is an intake screen just above the indicator dial. That screen is there to ke ... Hoover F5906-900 Upright Steam Vacuum

Hoover steam vac ultra 5 brush agitator - Vacuums


... Vacuums

Hoover steam vac ultra makes aloud screeching sound when turned on. Sounds like noise is coming from motor. can this be fixed?


It has a bad motor ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I need to download an Owners Manual for the Hoover Steam Vac Ultra Model F5881-900 Series 17.9


You can download the manual off the link belowhttp://hoover.com/support/manuals/ ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0975 seconds