Having problems with your Hoover F6025-900 SteamVac Wet/Dry Vacuum ?
The vacuum doesn't **** the water back up. I
\015 The vacuum doesn't **** the cleaning solution back up from the carpet. I cleared 2 filters I found which weren't very dirty. Feeling underneath there is negligible suction, but considerable air blowing out of 9 oval holes in a 2x2 in area.\015
Repair Help & Product Troubleshooting for Hoover F6025-900 SteamVac Wet/Dry Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have a sta rite (pentair) cristal high rate sand filter model T-200-BP-1....its leaking water thru the top of the valve, where the valve cover screws on the valve body assembly. it leaks water out where they go together around the screws. Also when i vacuum it, everything that i vacuum gets washed back in the pool when its on the filter position. Also the backwash leaks when its turned 2 the filter position, does it supposed to do that?...the only way i have gotten it to stop is to put a seper
My Kirby shampooer - G4 - hardly used any water from the tank and no suds at all. Pet hair did blow out of the small slotted holes in the tray as I moved the shampooer back and forth, but the carpet was basically dry. I did vacuum before shampooing, so the brush part seemed to work great during shampooing, but no water! The small screen was stuck in the crook of the hose that attached to the tank so I did get that out and put it on the small hole on the tank, but it didn't make any difference. I
Few things:Make sure the sponge and the valve under the sponge (water tank) is clean.Make sure you follow the instructions (f you do not have the manual you can find one ... Kirby Ultimate G Bagged Upright Vacuum
I got water in the motor of my vacuum. It shut itself down. It will not turn back on. Is my vacuum ruined?
Possibly ruined but try letting it drhy outside fir 24 hrs and try it out again ... Rainbow E series Canister Wet/Dry Vacuum
I took the hose off to wash it then after letting it dry overnight I put it back on but Im guessing it there was still a little bit of water in between the grooves which ran to bottom of vacuum and now my dyson gets stuck, sort of like a tight hinge. It vacuums fine but I have to keep pushing it down to the carpet with my foot. How can I fix this problem?
Lubrication at the pivot points ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
I have a Hoover Elite Rewind model #uh71009. We moved recently and it was jostled around and the red power switch popped out. I put it back in but it's stuck; it stays either left or right, it doesnt move back and forth. It appears there may be another piece missing from the power switch...all I have is the red switch and a tiny cylindrical metal tube with a spring on one end. This piece fits into the hole on the red switch. Inside the vacuum itself where this goes, there is quite a large cavity
We are using the wd40700 for wet vacuuming and the water is spraying out the back with only and inch of water in it
... Ridgid Vacuums
On/off switch we have two of these vacuums at work, and both of there on/off switches dont work too well. its hard to explain, but when u normally turn it on or off theres a little resistance in the switch and you hear a click, with both of ours the switch moves freely back and forth from on to off, no resisntace, no click, and the machine doesnt stay on, or off for that matter. the switch just moves back and forth.
... Eureka 2991AVZ Bagless Upright Cyclonic Vacuum
My Stanley 3 gallon wet/dry vac shoots water out the back when I vacuum up water. Is this normal?
The vacuum doesn't **** the water back up. I
... Hoover F6025-900 SteamVac Wet/Dry Vacuum
Steam vac won't vacuum water back up from carpet well - 1/2 of upper tank emptied on carpet and only 2 Tbsp. in lower tank retrieved. What can I do?
Is that float stuck up stopping the suction? ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
My Hoover SteamVac has been doing a wonderful job but in two instances, after emptying the dirty water and reattaching the reservoir, the machine has lost suction. The first time I was able to make it work again after taking it apart and putting it back together about 10 times. I don't know what I did that fixed it but as long as it worked again, I was happy. But it's happened again and I can't get it to vacuum. I can see that it isn't clogged. Can you please help me????
Look for the lower tank filter to be clean. also make sure the lower tank lid is on properly. latch when installed on machine. Make sure the front panel duct is on the lower tank. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
I lent it out (NEVER AGAIN!) got it back and no water squirts out of it in front I looked at it with the cover off but it doesn't come all the way off anyhow nothing looks clogged the belt is all fine too. Clean all the grime is seen and still doesnt work. What's wrong?
It might be pet hair caught in its hose. You might have to disassemble everything just to be sure. ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
It is not sucking the water back up. - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
There is a handle u hold down when u push the vac forward and thbat sucks up the water ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
Doesnt pick up water - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
Possible Causes Remedies\015\012 \015\012ReadyTools Dial may be at the wrong setting for the cleaning job <> Set ReadyTools <> Dial to either Tools / PreTreat ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
I changed the hepafilter on my eseries Rainbow Vacuum cleaner, I rinsed it with water,put everything back and now it wont turn on.
Please dry the hapafilter before putting it back \012and then try switching on \012thank you \012with regards\012Trilok ... Vacuums
On the wash cycle water doesnt come out - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum
... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum
Solution doesnt come out nor does water. - Bissell 9200 Upright Vacuum
Ensure you have water in tank and solution (or water in solution tank). When you start the vacuum up, the pump starts to prime itself. If you have air in the system, it takes a little longer to prime. Allow the vacuum to run for 1 minute before attem ... Bissell 9200 Upright Vacuum
I was using it to vacuum up water and it just shut off. I tried empting it but it still will not turn back on.
... Ridgid 25648 Wet/Dry Vacuum
Unit heats, sprays solution out, but will not vacuum water back up from carpet.
There could be a couple of things wrong with this... first, make sure that the hose/floor selector is set to the floor setting. second, make sure that the rubber seal is there on the unit between where your clean/dirty water t ... Bissell 7950 ProHeat Upright Wet/Dry Vacuum
Used vacuum and it bubbled and stopped...i changed water now it won't back on
THE BUBLES CAN GET MOISTURE IN THE MOTOR YOU SHOULD NEVER USE ANY SOAP IN THE CANISTER OR **** SOAP OFF OF FLOORES. YOU NEED A REPAIR OR SERVICE PERSON TO SEE IT ... Rainbow E series Canister Wet/Dry Vacuum
Doesnt pick up the dirt. Throws it back out - Oreck XL Ultra Bagged Upright Vacuum
... Oreck XL Ultra Bagged Upright Vacuum
My rainbow vacuum is spraying water out of the back by where the filter is. What is wrong with it??
Mine is too, would like to know why. ... Rainbow E series Canister Wet/Dry Vacuum
Vacuumed up some-little water & it started smelling & now it doesnt work
Once water or other liquids get into the motor, it's ruined. The smell is a dead give-away that the motor has burned out and needs replaced. ... Riccar Vacuums
My steam-vac carpet cleaner doesnt seem to be pulling the dirty water back out of the carpet.
The most common reason for this is that the lid is not fully seated on the dirty water tank. Be sure to hook the lid in front, and then snap it in place at the rear. Another problem could be that the duct is missing from the front of the tank. ... Hoover Vacuums
Why it doesnt **** up the water - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
The most common reason for this is that the lid is not fully seated on the dirty water tank. Be sure to hook the lid in front, and then snap it in place at the rear. Another problem could be that the duct is missing from the front of the ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum