Having problems with your Hoover F7220900 SteamVac V2 Upright Vacuum ?

Hoover model 6024-900 SteamVac

\015 The trigger/valve does not control the flow of fluuid from the tank to the brushes,. The valve is always open regardless of the trigger position. It appears(visually) that the rigger operates the linkage to the valve assembly but the valve fails to close. I assume the valve is designed to be normally closed but it apparently is always open and the mechanism fails to close when the trigger is released.\015

Answers :

I replaced the water control solenoid and it cured the problem.
It maybe that a water line has come off, where does it appear to be running out? Bottom of the tank, or down below, Bottom of the tank may have a bad seal or has a crack under the the seal, on the platform where the tank sits on has 2 or 3 tubes that hook up to it, check to make wure they are on, or a line could have come loose at the bottom, there you would have to take the top cover off.
Repair Help & Product Troubleshooting for Hoover F7220900 SteamVac V2 Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Hoover SteamVac Spot/Deep Cleaner, model F5515. I've had it a little over 1 year. It will not extract dirty water from the floor. I've made sure the recovery tank is attached correctly and also that the stair tool is connected. Is there something else I can try??


... Vacuums

Hoover Steamvac Model C3820 Clean Solution tank leaking


You need some inexpensive parts.\015\012\015\012\015\012\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 ... Hoover C3820 SteamVac Upright Wet/Dry Vacuum

Hoover steamvac ls edition, model f5894


... Hoover F5807 SteamVac Wet/Dry Vacuum

My Hoover Steamvac Model F7410-900 is making a


It's most likely the gears in the brush block or drive peg ,,take the brush block of then try it, get spares off link belowhtt ... Vacuums

I have hoover steamvac models f5889-900 and f7222-900. The brush motor is broken in model f7222-900 and I replace with working motor in f5889-900? I am using f5889-900 just as parts


... Vacuums

I have a Hoover SteamVac, Model F5906-900 and the brushes won't spin. It's like something is froze up inside. I have read where the Brush Turbine might need to be replaced. Can you tell me where I can find the schematics or an internal diagram of this model so that I can take it apart. Or maybe you might have another suggestion. Thank you Pauline Newman


\015\012Hello,\015\012\015\012This is most likely the reason the for the brushes stop spinning. I've written a very detailed repair guide on how to diagnosis this problem. This will walk you through step by step with pictures, an ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Vacums hoover model F5871-900 - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


Don't know what you wont but here is manual > http://hoover.com/file/664/ ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover steam vac ultra model F5883-900 - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Need A HOOVER Model #F7222900 manual - Hoover F7222-900 SteamVac Upright Vacuum


... Hoover F7222-900 SteamVac Upright Vacuum

Hoover steam vac model # f7441-980 - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=618767&thid=459387\015\012Hoover steam vac\015\012Posted by beverlyarm on Mar 21, 2008\015\012Hoover steam v ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

FREE MANUAL FOR HOOVER MODEL F5888-900 - Hoover F5888-900 SteamVac Upright Wet/Dry Vacuum


You can download manuals from the hoover website ... Hoover F5888-900 SteamVac Upright Wet/Dry Vacuum

My Oregon Scientific BAR888 has 5 windows, 1. temperature, 2. humidity, 3. mb/hPa or inHg (switch at the back), 4. bars showing pressure changes over 24 hours, and 5. time/date. Window 3 gives an option to set something between 0 and 2500. Oregon say they only have one set of instructions for the BAR888 but they do not match my instrument as there is nothing included for my window 3. Trouble is I don't know what the 0 to 2500 relates to and therefore don't know what to set it at.(My model does n


... Vacuums

Online manual Hoover SteamVac Dual-V Legacy Model # F7227900


... Vacuums

Hoover model 6024-900 SteamVac


I replaced the water control solenoid and it cured the problem. ... Hoover F7220900 SteamVac V2 Upright Vacuum

Have a Hoover Steamvac Model #F7426-900 - Series AA12.0 On the bottom of the clean water tank and the detergent container, the gaskets leak and water constantly drips from the tank. How do you repair this?


Inspect under the seals to see if the tank hasn't cracked, which is usually the problem. If it is a new seal that is needed, part #43513026. If a new tank is needed, part #42272104. ... Vacuums

Hoover SteamVac Model F5887-920 - hand attachment won't spray


I have a model I got in 2001. I found that the water sprayer on the hand tool is driven by a little turbine that relies on suction from the main vacuum motor. I eventually found that the spindle inside the turbine had separated and hence the hand-too ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Where can I buy a hose for my hoover steamvac carpet machine? Model number F5880-900


Call 1-800-948-1358 ask for Josh or Buck. This is a fairly expensive hose though. ... Hoover F5906-900 Upright Steam Vacuum

I need a manual for a Hoover Steamvac Deluxe model number F5866-900


Www.hoover.com ... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

I have a Hoover steamvac Dual V carpet cleaner Model No. F7427-900. This is a spin scrub upright. My brushes will not work. We think the white square that the brushes fit up into in the center of the brushs is not turning. Can you help me.


You are on the right track! Place a screwdriver (flatbladed) into the white drive square and try to turn it. If it is locked up the drive assembly is your problem. It is very common for these parts to lock up because of the moisture involved with ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have a Hoover Steamvac model #f5888-900. Recently, after finishing use, it leaks a lot of water from the bottom of the unit onto the recently cleaned carpets. Do you know what would cause this spewing of water after completion of use?


Either the rod in the handle is holding and not releasing the resevoir asm, this where the tank sits on, is bad. So water is not being shut off completely when off. ... Vacuums

Hoover all terrain steamVac brushes wont move. Does this model have a belt and where


The brushes are driven by air flow (suction). the most likely problem is with the turbine. This part can be replaced or repaired. If under warranty, take it tin for service, otherwise you will void any warranty. ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Hoover steamvac model #F5857-900


Is the lid for the tank locked on all the way round? The filter on the underside of this lid should have a 1/4 gap from the lid to the top of the filter. Is the duct in place, front of the tank. Any of these will cause the problem.\015\012 ... Vacuums

I have a Hoover model F5876-900 SteamVac Plus 1200. The motor is making loud noises and it seem to come from the bottom of the motor itself, what can I do to fix it myself.


... Vacuums

I have the Hoover SteamVac Dual Model F7246-900 Serial AA12.0. In the Clean Water Tank the small black plastic check valve leaks water as machine is in use even when the on-off switch is not on. Can I purchase a new valve?


... Hoover Vacuums

Suddenly the automatic deterent mixing system in my hoover steamvac widepath (model F7443-940) stopped from working. It does not dispense detergent anymore. What could the problem be?


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=766252\015\012Generic problem for all Vacuums\015\012Suddenly the automatic detergent mixing\015\012 ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0558 seconds