Having problems with your Hoover F7220900 SteamVac V2 Upright Vacuum ?

Turbine locked up

\015 I am having a little trouble getting to the turbine. I am not sure exactly what pops off to get to it. Of course the V nozzle was easy. I have already tried to remove the brush housing without success. 4 screws under the unit, right? Should it pop off (down) after they are removed?\015

Answers :

The brush block is just held in by clips, just use a screw driver to pry it out. There are 6 screws on the bottom that need to be removed. 2 where the brush block was, just alittle back from there are 2 more. Then near the edge on each side, are screws that are deep in a hole. Also are 2 other longer screws from the bottom that go into the turbine. Remove the top, there are 2 more screws at the front of the turbine.
Repair Help & Product Troubleshooting for Hoover F7220900 SteamVac V2 Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hoover U6317-930 - Turbine Locked Up!

You will need to remove the hood as though changing the belt. Then best to detach the handle/ bag chamber with the black screw at the lower end in the center. Lay the vac flat and you should see two clamps over the motor housing, one on either ... Hoover U6311-930 Power Drive Bagged Upright Vacuum

Turbine locked up

The brush block is just held in by clips, just use a screw driver to pry it out. There are 6 screws on the bottom that need to be removed. 2 where the brush block was, just alittle back from there are 2 more. Then near the edge on each side, are ... Hoover F7220900 SteamVac V2 Upright Vacuum

Ordered I put all my parts in zip lock bags, number them in order. Then hopped online and ordered the turbine. should be here is a few days. Thank god this info was out here when I googled it. I probably would have thrown the machine out and bought a new one. Thanks, Karen

Happy to help ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover Power Drive Supreme - Locked Up!!

Q: Are you talking about the turbine powered hand tool that attaches to the hose? If so, just squeeze the two round pins on the sides, and the housings will separate. ... Hoover U6311-930 Power Drive Bagged Upright Vacuum

I just bought a Samsonite "Freeminder Flex" backpack with handle. My issue is with the lock... The combination for this lock was set to open at 0-0-0. It opened and locked perfectly at first. But after following the instruction to set up the new combination code, it doesnt lock anymore....please help and thanks! Linda

... Vacuums

Turbine Hi I found out through your site that my turbin is bad on my steam vac and I found some information as well on how to disasemble the steam vac to get to the turbine but still was wondering if there were some more detailed instructions on how to remove the turbin. I am a sigle mom and doing the work on the steam vac myself and need a little more detailed instructions. Please help asap and have a bless day.

There are some screws on the bottom that have to come out so you can remove the top housing. Take the brush block out, there are 2 screws above where it sits. The turbine sits near the front, and in the mid section, 2 screws on the front of it and 2 ... Hoover F7220900 SteamVac V2 Upright Vacuum

My Singer Futura CE-150 keeps locking up.. The wheel will not turn and the needle locks-up.. I have re-threading and cleaning out the bobbin area but it is still locked up

... Vacuums

I can not get the food chute lid to lock on top cover. It will lock but not when the top is locked in place. thanks

Hello!what is the brand and model number?please post back! ... Vacuums

Dirt cup lock on windtunnel vacuum won't lock

It may have to be taken off and then re-installed, but if it is only 1 and 1/2 old, then it is under warranty. There is a full year on Hoover vacuums. Just take proof of purchase with you and take it to a warranty repair shop. You should have thei ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Turbine head Dyson DC39 The turbine does no stay on consistently

... Dyson DC39 Animal canister vacuum cleaner

I bought an old Juki Baby Lock 418 at a garage sale. It will sew for 3 or 4 inches and then seems to be off timing and locks up. I have no instruction manual. Is there a manual available for this old machine? I would prefer a downloadable manual because I already have money invested in the machine which doesn't seem to work. It was suppose to have been gone over at a repair shop before I purchased it and was told that it worked. .

... Vacuums

The canister wont lock in position like theres a part missing to push it up to lock in

... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Locked in down position.. won't go back up... looking at from the front.. the plastic clip at attached to the front vacuum wheel won't lock.. gears stuck

The extension pole will not go back down ... Dyson DC25 All Floors Bagless Upright Vacuum

My dyson dc25 vaccum lock for the beater bar keeps comming unlocked,i use a screw driver to lock the bar side door ,but the carpet seems to unlock when i use it and if i don't watch it the beater bar will slide out we baught the unit about four months ago and love it

... Vacuums

My Viking Husqvarna, model number is 5430, is locked up. The control wheel for the movement of the needle is very tight. I have no instruction book. Does it have a lock on this wheel for transportation? This is a sewing machine my mother had, and she is gone now. Hope you can help. Thank-You.

... Vacuums

We have a Dyson stowaway DC20 Turbine and the turbine head is not spinning at all.Can you please advise if this can be fixed and how. Thankyou from, Bev Effern 0411 018 531

Are the pins at the connection between the wand and head damaged? Has the turbine been verified that there is not blockage? ... Dyson Vacuums

My Hoover Z 400 collapsible vacuum won't lock in the upright position. I pull the pin to change from a cannister to an upright, but the unit won't lock into position

This just happened to me. i took the vacuum completely apart and found that there is a locking plastic "tooth". this had snapped off but still it the track. the damage was bad but i was able to wash of all the lube off it and used a 2 part epoxy glue ... Hoover F5858-910 SteamVac Vacuum

Philips Norelco Arcitec electric shaver: When I press the on/off button, a "lock" symbol appears. The shaver then will NOT work until placed on the charger for a few minutes. This lock icon has never appeared before. About 2 years old.

This is a travel lock feature. The lock is activated by pressing the on/off button and holding it for 3 seconds. This will lock the razor in case it is turned on during travel. ... Vacuums

FOR dlh2457: Just came across your post to another person's dilemma. I found this Baby Lock BL4 428 serger at a thrift store. It powers on but I know nothing about its use. I don't want to spend $14 plus for an owner's manual and find out this machine does not function properly or possibly damage it by improperly threading it or having it out of adjustment. I'm in need of an owner's manual for a Baby Lock BL4 428. If that offer is still good I'll take a "copy" of it and will compensate you for

I've found it , it costs 9.95$ , together with shipping it will cost 15.93$ at your doorstep.Bit more than 14$ but that is th cheapest one.Symply ... Vacuums

Our Samsonite Pixel Cube suitcase combination lock won't unlock! We are definitely putting the correct combination into it but the lock isn't moving and the suitcase is full of our belongings! We've used it on numerous occasions before and never had a problem with it so can't understand why it has suddenly jammed!

Try 001, then 002, then 003 and so on. It may take you half an hour but worth the try. Otherwise, if you don't want to break it open, you really have to call Samsonite Customer Service Center at 1-800-765-BAGS. ... Vacuums

Turbin hey its me Lisa I took the turbin apart and know where the wheels (gears) go but they have this little bearing or what ever it is its round and has a whole thru sent can't figure out how it goes to put it back together. the thing turns really good now after I soaked it HELP

You should have it all back together now. Hope it is running ok. \015\012Lauren(reddevil6) ... Hoover F7220900 SteamVac V2 Upright Vacuum

My telescopic wand height adjustment won't lock the height in place. The wand extends to full height with no locking in place. How do I fix it?

These wands have a very small nub that locks them into place. They wear out very easily. You might have to replace the wand. ... Euro-Pro NV31 Infinity Vacuum

The brushes will not spin when in the lock down position. I adjusted the arm internally and it does not seem to apply enough pressure to have it fully lock down. Can the mechanisms wear out.

This unit has a rubber "clutch" piece to engage the brush which must be replaced occasionally. See if you can move the brush with your fingers while holding the belt to prevent it from turning - be sure the switch is set to carpet, and the motor is o ... Riccar 8955 Upright Vacuum

I'm trying to get my S7000 Miele to stand upright an lock in this position. It wont , i tried to see if foot release was jammed but cant tell it doesnt seem to release to let it move upright an lock in again..help

There is a rear dust cover that sometimes gets stuck, this will make it almost impossible to lock the handle up. First locate the cover which is at the rear right above the wheels. It's about 2"x8" and ribbed vertically and slides up behind the rear ... Miele S7210 Bagged Upright Vacuum

Hoover windtunnel tilt mechanism won't remain locked in upright position or at any of the fixed angle positions - now any slight bump and the lock releases. Normally you must manually use the small foot pedal release on the left side as you face the vacuum from behind.

Hello, stanI was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I ... Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0840 seconds