Having problems with your Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum ?

HOOVER STEAMVAC F7425-900

\015 THE BRUSHS ARE NOT TURING. TOOK BRUSHES OUT. WHERE STEM FROM BRUSH ATTACHMEN FITS INTO, WAS NOT TURNING. I HAVE HAD THIS UNIT REPLACED THREE TIMES, UNDER EXTENDED WARRENTY. HOW DO I TAKE COVER OFF ON BOTTOM UNIT TO GET TO GEAR MOTOR. MAYBE IAM NOT GOING TO RIGHT PLACE. WILL BE LOOKING FORWARD TO YOUR REPLY/ THANKX OLDWOODSMAN\015

Answers :

Thanks for the information reddevil6. I just purchased this SteamVac last month and I used it three times. I cleaned it after each use. I read all the literature on what not to do and what to do. So the unit said that it has enough grease for life of product??? When I took the turbine apart on both sides, there was no grease. Lubed the it up and runs like a champ. Thanks
There some screws off from the bottom, remove the top cover, the turbine has 2 screws on the front of it and there 2 long screws you take off from the bottom, remove the tubing and it should come loose. Some times you can take it apart and clean the inside parts and it will work ok, if that doesn't do it then you have to replace it.
\015\012984926c.jpg
Repair Help & Product Troubleshooting for Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

F6020-900 hoover steamvac widepath manual - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Hoover steam vac v2, brushes won't turn. - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


Hello,The Hoover SteamVac's are notorious for \015\012this exact problem. There are several things that can be causing this \015\012probelm.First, what you'll need to do is take the brush block \015\012out of the machine. To d ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Replacing belt on Hoover F5915-900 - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Attach upholstery cleaner to hoover f5857 - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Hoover F7425-900 SteamVac V2


Http://www.hoover.com/pdfs/manuals/F7452900.pdf\015\012Heres a link to the manual if you dont have one, Ive emailed them and they gave me the same solutions that are on page 17.\015\012\015\012? Make sure tank is securely locked in\015\012position\01 ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

How to hook up tool to clean upholstery - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


Keep your upholstered furniture looking fresh by vacuuming it regularly\012with the upholstery tool attached to your vacuum's hose. Prevent the\012fabric from fading (or at least delay this) by keeping your furniture\012out of direct sunlight -- clos ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

It wont **** water up - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


Try putting the recovery tank on again. check the filter screen at the bottom by the brushes and in side of the recovery tank screen. worst case, it will be the rubber grament under the recovery tank, to get to it you will have to.... remove the reco ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Brush will not turn - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

IT IS NOT SUCKING WATER OUT? - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


If the motor is running there are two possibilities for lack of water recovery. The most common problem is that the lid is not squarely seated on the tank. The other is that the rubber seal has fallen off the motor cover suction duct. The seal sits a ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

On the wash cycle water doesnt come out - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

How Do I Replace/Install the Hoover SteamVac Replacement Turbine Brush Gear Part # 91001019, 43191006, 91001097 - Its for a F7425-900. Is There a manual?


... Hoover V1 SteamVac SpinScrub Vacuum

Brushes donot turn when asked to shampoo - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


The brushes are turning by an air driven turbine. The turbine has a \015\012pivot bushing made of steel inside of it that gets rusty because of the \015\012water that is running through it. The turbine will have to be replaced. You can find a genu ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Brushes not rotating on hoover f7425-900 steamvac v2


I had the same problem and it was inside the turbine assembly. If you take the turbine assembly off the machine and open it up, you will see the turbine blades on one side and the reduction gears on the other side. The problem on mine was a needle ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

My spin scrub brushes don't spin at all. - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


Check that the belt that spins the brushes is not broken, also that the\015\012gear that drives the belt is turning.\015\012\015\012Tom ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Hoover Steamvac model F7425-9000: The shampoo bollte attached to the clean water reservoir became detached and now leaks shampoo prfusely. jerryhof


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Brushes don't turn - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


I had the same problem and found a manual online. I never realized that there was a filter in the bottom of the machine. There are 2 red tabs, squeeze them together and pull ( I had to use a pair of pliers to pull). Note which is top and which is bot ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

The cleaning solution does not come out. - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


Our cleaning solution had gotten 'stringy' or 'thready' and clogged the exit. Hubby emptied it, cleaned it thoroughly (with long-handled aquarium brush), and with new bottle of solution it worked fine again. ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Brushes do not turn - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


The brushes are turning by an air driven turbine. The turbine has a \015\012pivot bushing made of steel inside of it that gets rusty because of the \015\012water that is running through it. The turbine will have to be replaced.\015\012 You can fin ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

On hoover steamvac F7425-900 brushes do not rotate. I have cleaned the filter


May be the motor is the problem ... Hoover Vacuums

Need manual to operate - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Srub brushes not turning - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


You will find broken belt or something is jamming it ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

HOOVER STEAMVAC F7425-900


Thanks for the information reddevil6. I just purchased this SteamVac last month and I used it three times. I cleaned it after each use. I read all the literature on what not to do and what to do. So the unit said that it has enough grease for lif ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Need manual foe hoover F6040-960 steamvac - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Dirty water not returning in hoover steamvac - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


Recovery lid not on correctly ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

F5808 hoover steamvac - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0349 seconds