Having problems with your Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum ?

Steamvac spinscrub F 7425-900 not sucking up water

\015 I saw following on your sight "If the motor is running there are two possibilities for lack of water recovery. The most common problem is that the lid is not squarely seated on the tank. The other is that the rubber seal has fallen off the motor cover suction duct. The seal sits atop a round tube. As viewed from behind, the seal is below the front left corner of the lower tank." I do not have the owners manual so I do not know for sure what the MOTOR COVER SUCTION DUCT is . The lid is on squarely . Can u direct me to a site that has the diagram of this machine so I can see the parts etc? ARGHHHH! Jane\015

Answers :

Repair Help & Product Troubleshooting for Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Steamvac spinscrub F 7425-900 not sucking up water


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Brushes do not spin and not sucking up water - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Is not sucking the water back up - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Steam vac sprays but won't suck up water... - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover SteamVac SpinScrub not sucking water into recovery tank.


... Vacuums

My upright will not suck the water back up - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


ITS THE DUCT PIECE ON THE FRONT OF THE DIRTY WATER TANK (DWT). ITS NOT LINED UP. 1. TAKE LID OFF OF DWT2. SLIDE THE LITTLE SQUARE PIECE (5\\'X5\\'X1) (THE DUCT) ON THE FRONT OF THE DWT AS FAR UP AS POSSIBLE AND IF IT ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover SteamVac Plus 1200 upright hot water extractor Water/carpet cleaner applying o.k. Suction on the "floor" does not work. Suction on the hand tool works somewhat, but water is not collecting in the bucket. There is suction coming from the floor but water is not going into the bucket. It does not appear to be clogged because I can feel with my hand that air is flowing from the floor. The water is not being sucked into the bucket.


... Hoover Vacuums

HOOVER SPINSCRUB WONT SUCK UP WATER...BLOWING AIR OUT


ITS THE DUCT PIECE ON THE FRONT OF THE DIRTY WATER TANK (DWT). ITS NOT LINED UP. \015\0121. TAKE LID OFF OF DWT\015\0122. SLIDE THE LITTLE SQUARE PIECE (5'X5'X1) (THE DUCT) ON THE FRONT OF THE DWT AS FAR UP AS PO ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

My hoover steamvac 5914-900 clean surge is not sucking up water


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

SteamVac F5914-900 SpinScrub won't stay upright or collect water


(1) Upright: Sounds like the tab on the lower handle that the handel release latches to has broken off. The machine is fully functional without it otherwise.\015\012\015\012(2) Assure the ring gasket is in place under the hood. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Steamvac is not sucking water up - Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum


Probably is clogged up somwhere ... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

My Bissell 9200 is not sucking the water into the dirty water resevoir. 1. The gasket on the clear-view seems fine. 2. The suction power just doesn't seem powerful enough (feeling with my hand). 3. The brushes turn fine and belt is fine (not sure if that even matters for this issue). Any help appreciated. Thanks, - Matt


Disassemble all lines and check to see if all O rings are installed. If cracked missing or stretched out of shape no suction will be provided ... Bissell 9200 Upright Vacuum

Hoover spinscrub The used water tank on my Hoover steamvac spinscrub is empty but the ball keeps popping up as soon as I begin to try to use it. What's the problem?


... Vacuums

My steam vac was working...i thought the dirty water was full but it didn't make the hi pitched noise now that i think about it.....now it is not sucking up the dirty water.....i checked to make sure it was placed right and can't visually find anything wrong....help! i have pet stains to vacuum up...this is only about 1 year old.....


\015\012The most common reason for lack of pick up is that the lid is not fully seated on the dirty water tank. Be sure to hook the two tabs on the front of the lid, and then snap the rear latch into place. Another reason is that the duct on th ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hand tool to hoover steamvac does not suck back up the water


... Hoover F5900-900 Upright Steam Vacuum

Hover steamvac spin scrub isnt sucking up water


... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

Hoover Steamvac Spinscrub won't pick up water - is it filter


... Hoover V1 SteamVac SpinScrub Vacuum

My hoover steamvac spinscrub wont **** up water


ITS THE DUCT PIECE ON THE FRONT OF THE DIRTY WATER TANK (DWT). ITS NOT LINED UP. 1. TAKE LID OFF OF DWT2. SLIDE THE LITTLE SQUARE PIECE (5'X5'X1) (THE DUCT) ON THE FRONT OF THE DWT AS FAR UP AS POSSIBLE AND IF IT BEN ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have a Hoover SteamVac Spot/Deep Cleaner, model F5515. I've had it a little over 1 year. It will not extract dirty water from the floor. I've made sure the recovery tank is attached correctly and also that the stair tool is connected. Is there something else I can try??


... Vacuums

My steam VAC upright wont **** up water - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


The most common and simple problem with these involves the recovery tank. Take it off, remove the cover and check to be sure it fits snugly. All tabs must be locked front AND back. If this machine has tools you have to hook up in order to use you ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

It won't **** up the water - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


Suction blocked with hair or fibre. remove covers clean and re-test ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

My hoover steam vac is not sucking up water - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

It quit sucking. What do I do???????? - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


Sounds like the belt broke, you will have to get a new belt and put it on. check to see if brush is turning. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Upholstry attachement Hi, I have attached my upholsty hose, but it will not suck up the water. The hose is spraying correctly. Can you help. I have a Hoover SteamVac Supreme. Thank you, Sarah


The hose end should have a duct on it that you insert in front of the dirty water tank. It must be down all of the way so it will seal. This is where your suction starts from. Acouple of other reasons could be the dirty water tank lid is not locke ... Hoover F5832-910 SteamVac Supreme Vacuum

I have just purchased a steamvac spinscrub carpet cleaner and it keeps telling me the dirty water tank is full when its bone dry.


If this is a Bissell, there is a float in the tank that may be stuck. But you also have a years warranty on this, if you can't figure it out, take it for warranty repair. ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0436 seconds