Having problems with your Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum ?

Detergent container will not despense fluid

\015 Detergent container will not dispense fluid; I took everything apart and clean all parts but still can't get it to work - Any ideas?\015

Answers :

Check that the switch is on autowash and not just on the rinse option. I see that customers do this alot.
Repair Help & Product Troubleshooting for Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Detergent container will not despense fluid


Check that the switch is on autowash and not just on the rinse option. I see that customers do this alot. ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

I lost the detergent container on my Hoover Model F7220-900. Its a small plastic bottle that sits on the back of the clean water tank. I called the help desk and they told me that they no longer make that part so I have to pay $55 to replace the whole tank which will come with a detertent container built in. The whole carpet cleaner was only worth about $225 new. I don't feel I should have to pay $55 for a part I don't need but the machine is worthless without it. Any good ideas to solve th


... Hoover F7220900 SteamVac V2 Upright Vacuum

The detergent container fell off as I removed the full tank from my sink. The top portion of the container broke off and is no longer usable. How and where do I replace it.


Hi!\015\012\015\012You can order that part from the link---\015\012\015\012Hoover parts\015\012\015\012Also you can remove i ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Detergent Container spring and plug


Won't spray out water to wash neither with the hand attachment, nor with the floor shampooer! This was a lemon since I got it. They made me send it to Madison Wi which was costly enough but then they kept it for months, then they sent it to one of th ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

I have a Bissell Proheat Powerlifter model 1698 that has problems with the cleaning fluid draining from it's container in less than a minute. Has anyone experienced this problem??


Is there a puddel of water under it? it may just have a split pipe even a split in the bottom of the tank or its lost the little velve that slows the flow of water to the brushes ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Have a Hoover Steamvac Model #F7426-900 - Series AA12.0 On the bottom of the clean water tank and the detergent container, the gaskets leak and water constantly drips from the tank. How do you repair this?


Inspect under the seals to see if the tank hasn't cracked, which is usually the problem. If it is a new seal that is needed, part #43513026. If a new tank is needed, part #42272104. ... Vacuums

I have a steamvac v i was wondering if i fill the container of water to the top and does the water need to be cold or hot? I heard I could use tide liquid if so how much do i put in the detergent holder


Hi there SmartAlec from NelsonVacuums.com.au here. I have looked at literally hundreds of steamvacs over the years and you can use warm but not hot water in the tank. You c ... Hoover Vacuums

Bissell carpet cleaner proheat 9200 does not despense water...opened inside and found some tubes with fluid some without, what does the pump look like? i think it may be what is stopping the process.


Here's a link to a site that describes how to do some troubleshooting. Good luck!\015\012\015\012http://www.ehow.com/how_5 ... Bissell 9200 Upright Vacuum

My Bissel proheat carpet cleaner wont spray out of the bottom or the spray handle. I took of the scrub brushes and off and cleaned out the bottom of the machine including popping out the two spray heads to make sure they were not clogged. Put it back together. Still no spray! I also did the turn off, remove fluid containers, replace, turn on for one minute to prime the pump, and still so spray...does this mean my pump is not working?


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Crack on the bottom side of the detergent container


You go to http://vacuumsuperstore.com/F7205900parts.html and order it online, or maybe have you local service shop order one for you. ... Hoover F7220900 SteamVac V2 Upright Vacuum

My carpet cleaner (bissell proheat plus) is not steaming, dispensing cleaner. Seems like there's a little thingy that should be spinning or turning..... When I work a small area of carpet, it just leaves behind dry blobs of carpet gunk like pet hair. I had to use a carpet sweeper to clean up. FYI - I filled the cleaning fluid container and after trying to clean the carpet, it did empty out but the carpet isn't wet. Any tips? The manual doesn't help.


You need to replace the pump belt. Here is the belt you need:Bissell ProHeat Belt ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Water is not being discharged. I have filled the reservoir that holds the carpet cleaner fluid And I have filled the water container. I know how to use the cleaner, it has always worked, But now, no water is being discharged to the carpet. I turn it on, squeeze the trigger, but nothing comes out. The wheel that is suppose to spin (to indicate that water is being discharged) is not spinning. Everything else works. I.e. the suction works, and the hand held accessories work.


That means that the pump belt is worn and it needs to be replaced. You can get a replacement belt and view the manual here:Bissell Pump ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Bissell 9500 Proheat 2X won't dispense fluid.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

No dispensing of water from container.


Check the bottom of the tank, there should be a gasket on the valve at the bottom of the tank. Must be on the tank and not sitting in the hole. Make sure the tank is sitting firmly and not off set even a little. Loosen the cap for the flow indicto ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

My Bissell spot bot stopped sucking the solution from the container. When we had the problem before we just reseated the container and it started releasing the water/solution. There is a funk little hole that takes water from the container and it seems to move around a bit. We own 3 spot bots, and have had trouble with all of them.


... Bissell 12005 Spot Bot Handheld Vacuum

Hi, I have an Upright Vacuum. Unfortunately, the box that contains the Dust container handle, and the Dust container pipe, has broken the base. It is right where we open it to clean the pipe. It is possible to buy the whole tube? Alicia


Hi, yes it is possible to buy the whole tube replacement but you have to get in touch with the manufacturer of the vacuum cleaner to make a request for the needed parts.Take care ... Vacuums

I have a Everstar Central Vac CV303. I emtied the Dirt Container for the first time and tried to put the dirt container back on but the clamps are too loose and when we turn the vac on the dirt conta


... Vacuums

I need a manual on Kenmore Model 116 33720200. I am unable to get the container off that is full of the dirt. How do I remove the container?


... Kenmore Vacuums

LOSING SUCTION IT APPEARS WHEN IN UPRIGHT POSITION, ALTHOUGH SUCKING (TO SOME DEGREE) IT THROWS BACK SMALL PIECES TO THE BACK OF THE VACUUM OPNTO THE CARPET BEHIND, AND THE CONTAINER HOLDING THE STUFF ISNT WHIRLING AROUND THE CONTAINER. I WONDER IF THE PASSAGE TO THE WIND TUNNEL IS BLOCKED, AND OF COURSE THAT IS THE PART I CANNOT GET TO, AS IT NEEDS A SPECIAL TOOL TO UNSCREW THE BACK OF THE VACUUM.


Is brushes moving, if so it is clogged , usually takes a star bit to take apart to clean ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

We have a beam Serenity plus home vacuum system and there is no longer sucks. I removed the dirt from the bottom plastic container, but I also notice a sack or bag connected to the unit when I removed the bottom container and inside that sack there appears to be lots of dust. How do I access that and remove that dust without damaging the unit. I don't know how to do that


Hello. Let's begin by getting that dust and dirt out of your permanent filter. To do this, get a big clear plastic bag and pull it up aroung your canister, with the dirt receptacle removed. Then Grasp the sewn in weight inside of the filter and sh ... Beam Industries 2900 Serenity Plus Central System Vacuum

I have a dehumidifier from Hampton Bay bought in Jan. 2001. The water container is leaking. The model is HB40 REV. N. Serila # FN8306511781. Where can a get a replacment for thsi water container?


Hello my name is Heath it will be my pleasure to assit you. Unfortunaley the manufacture has discontinued the bucket and it is no longer available. If you know where the water is leaking from and can see the crack or the hole you can try and repair i ... Vacuums

Filter container should the dirt swirl around within the container when the vacuum is running?


Yes , that is how they work. It is very reassuring to see all that dirt being collected isn't it? ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Hoover Jet and Wash 1500w S6254 001. Used once with great difficulty as assembly and use instructions are hard to follow.Now will not work as carpet shampooer at all, although assembly is correct as far as I can see and both motor and pump appear to be working and I am using the recommended cleaning fluid.Hoover website is no use at all in solving the problem.No cleaning fluid is being drawn up from the tank in to the cleaning fluid hose.There is suction from the suction hose so the problem appe


I am having the same prob my uncle got me one i cant find the manual anywhere to set it up the prob i have is where does the handle to make the water go out connect tooo ??? on the main pipe that sucks it back up i have tried every which way but not ... Vacuums

Hi my friend filled the detergent tank on my steam cleaner with straight Laundry detergent now it's only producing suds how do I stop it so it can work properly?


You'll have to rinse it until the detergent is out. Add a little salt to the rinse water. It will help eliminate the sudsing. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

We are unable to attach the water/soap dispenser container to the waste container on are Hoover Steam/Floor vacuum. Any help would be appreciated. Thank You


On most models they don't connect to each other but rest in a bracket. When the handle is straight up you can remove the water/soap dispenser by lifting the handle. When you put it back in put the base in first and the top will click in a ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0216 seconds