Having problems with your Hoover F7431-900 SteamVac Vacuum ?

Steamvac quit spraying

\015 Hi....\015\012I am cleaning my carpet and everything was fine the "first round". I emptied the dirty water and refilled the clean water reserve and when I tried to pick up where I started, the sprayer won't spray. I cleaned the black filter, checked the rubber washer, and can't find out what's wrong. HELP!! THANK YOU!!\015

Answers :

Check the seal that the clean water tank sits on, may have come loose. The filter inside the dirty water tank has been pushed up too far, needs to have a 1/4 in. gap from the top to the top of the filter.
Repair Help & Product Troubleshooting for Hoover F7431-900 SteamVac Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Steamvac quit spraying


Check the seal that the clean water tank sits on, may have come loose. The filter inside the dirty water tank has been pushed up too far, needs to have a 1/4 in. gap from the top to the top of the filter. ... Hoover F7431-900 SteamVac Vacuum

Hoover SteamVac won't spray properly


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

My scooba when switched on starts to spray water then spins round faster than normal then starts to go backwards quite quickly then stops then continues to reverse more then stops & with the nor


... iRobot 5800 Scooba Vacuum

I have a Hoover F5411 steamvac Jr spot cleaner and it won't spray and one of the answers was to turn it over and try to turn the impiller to see if it turns. Where is the impille? Is it on the bottom of the top of the steamvac or on the bottom of the part that takes in the recover water?


... Vacuums

Little green machine pro heat pet the collection tank wasn't collection and dirty water was coming out of the bottom. i took it apart, cleaned it up and put a new "duckbill" gasket in. then it quit spraying, but i think i got that working again. now after i spray and get a good foam on the carpet, i switch to suction and it seems very weak. i can see the water moving (trickling) from the head into the hose but it is not reaching the collection tank -- actually, i am not sure where its goin


... Bissell THE BISSELL LITTLE GREEN MACHINE Vacuum

Hoover steamvac ultra hand tool doesn't spray water from hose - it has steady stream instead of spray


... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

Hoover SteamVac quit working.


There is no reset button to this machine. in some cases if the machine stops or makes a weird noise or a smell like electrical, most likely it's the motor that went out or you could just have a switch that went out. if you didn't have any of these th ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover Steamvac hose won't spray water


SOLUTION#1 If the attachment wont spray water, the white plastic nozzle tip may be clogged. Take the brush attachment off, remove the two screws from the gray retaining cover (BE CAREFUL THE WHITE TIP UNDER THE BLACK PLASTIC TRIGGER MECHANISM IS SPRI ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

My steamvac will spray out water


Assure the ring gasket is in place under the hood. A round rubber gasket must be in place on the round tube under the hood where the recovery tank sits to connect the vacuum from the motor to the round tube on the bottom of the tank. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

My hoover steamvac spot doesn't spray


The pump has to prime first ,put water in the solution tank an yurn on and keep the trigger pulled till it sprays.if that don't work take it back ... Hoover F5505 SteamVac Spot Vacuum

Hoover F7458-900 SteamVac The brushes quit


My Hoover F7458-900 was doing the same thing, brushes not turning and since it is about 7 years old and out of warrenty I decided I had nothing to lose so I took it apart after reading all the other posts on this problem. The brushes are actually tu ... Hoover F7205900 SteamVac V2 Wet/Dry Vacuum

Hoover Steamvac Upholstery Cleaner will not spray water.


In my case when I pulled the trigger on the upholstery hose I barely got a drizzle of water. After looking at the parts online I realized the valve assembly on the spray end of the hose consisted of a black valve housing, with an inner spring and a w ... Hoover F5832-910 SteamVac Supreme Vacuum

Hoover steamvac maxextract 60 wont spray clean water


... Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum

Hoover steamvac dual v carpet cleaner F7412-900 will spray water/shampoo when on WASH


... Hoover F7452-900 SteamVac Upright Vacuum

Hoover steamvac not ejecting spray of water


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover Steamvac F5892-900 leaving lines on carpet, does not seem to spray


Is the cleaner sucking up the water like it should? If not , check that the filter on the inside of the lid has a 1/4 in. gap between the filter and the top of the lid. Either that or the water isn't completely being shut off when you release the t ... Hoover F5892-900 SteamVac Upright Vacuum

Hoover SteamVac Model F5887-920 - hand attachment won't spray


I have a model I got in 2001. I found that the water sprayer on the hand tool is driven by a little turbine that relies on suction from the main vacuum motor. I eventually found that the spindle inside the turbine had separated and hence the hand-too ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Hoover steamvac won't spray water on carpet.


Check the ank valve to make sure when you push it in that water is coming out. The reservior asm, (the tank bottom sits on this)is bad or the rod in the handle isn't pushing the reservior asm when you squeeze the trigger.\015\012\015\012 ... Hoover F6212-900 / F6215-900 SteamVac Agility Upright Vacuum

Hoover steamvac upholstery nozzle does not spray


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover steamvac won't spray water/cleaning solution


Clogging of the pump that sprays water/cleaning solution is very common in Hoover and Bissell Steam Vacs. Try running a cycle of 1part vinegar or CLR to 3 parts warm, distilled water through the vacuum pumps. The heads get clogged with soap and the ... Hoover F7431-900 SteamVac Vacuum

I have a bissel powersteamer and it quit spraying the solution on to the carpet... the jets are not blocked....how can i get it working again?


Does water squirt out of the hose nozzle, if it does, then check the heater inside the handle asm. Make sure that where the tubes hook up to it are not clogged. If water doesn't squirt, check for the seal at the bottom of the tank, it needs to be o ... Vacuums

Jets quit spraying - Minuteman C46000-00 Self Contained Carpet Extractor Vacuum


My Minuteman c46000-00 isn't pumping any fluid through the jets. Would this be an alkaline problem, and if so, will baking soda and vinegar clear it up?\015\012Also, where can I get a fix-it manual for this unit.\015\012Does anyone know h ... Minuteman C46000-00 Self Contained Carpet Extractor Vacuum

My Bissell Model 9200 quit sucking up sprayed solution.


There are a couple areas to check:\015\0121. The black gasket where clearview water collecting unit and the base's front meet. Ensure gasket is in good condition.\015\0122. Check if you're getting sufficient suction: remove the water co ... Bissell 9200 Upright Vacuum

My hoover steamvac turbopower 5000ls will not spray for hand tool


My turbo 5200 will not pick up the moister into container to dry does anyone know what the problem may be ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Won't spray my hoover steamvac silver won't spary the cleaning solution what can I do


This could be caused by several things. First take the clean water tank off of the machine, and turn it upside down to inspect the bottom of the tank. There should be a gasket with a spring and valve stem, which you should be able to move the valve ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1531 seconds