Having problems with your Hoover F7431-900 SteamVac Vacuum ?

Replacing turbine on hoover max extract

\015 I've determined that the turnbine needs replacing on my hoover max extract cleaner but am having trouble finding directions as to how to do this exactly. i have the new part but it came with no diretions.\015

Answers :

Repair Help & Product Troubleshooting for Hoover F7431-900 SteamVac Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Replacing turbine on hoover max extract


... Hoover F7431-900 SteamVac Vacuum

Pump replacement hoover max extract 77 - Hoover Vacuums


... Hoover Vacuums

Hoover max extract platinum wont spray solution


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Hoover turbine replacement


First you must remove the dirty water tank then the nozzle window on top of the machine. (this is the clear piece that the dirty water is sucked through.) then remove all 8 screws from the bottom along with the 1 screw on the main housing. after all ... Hoover F7431-900 SteamVac Vacuum

Hoover Max Extract Dual V has a burning smell, what could this be?


... Vacuums

Replace turbine or control switch for Hoover F7412-900?


... Hoover F7412900 Upright Vacuum

Hoover max extract 60 brushes wont spin - Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum


... Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum

Hoover max extract leaking water - Hoover H3060 FloorMate SpinScrub 800 Upright Wet/Dry Vacuum


... Hoover H3060 FloorMate SpinScrub 800 Upright Wet/Dry Vacuum

Hoover max extract wont suck - Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum


... Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum

Hoover max extract hose wont turn off - Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum


... Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum

Hoover max extract brushes not turning - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

How to replace turbine on hoover steamvac - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover max extract 77 water tank leaking - Hoover F5505 SteamVac Spot Vacuum


Remove the little black plastic plug on the bottom of tank (has a metal spring around it), that is where it is leaking. Wrap Teflon (pipe tape) around it and the spring. Replace black plug. Not a permanent fix, but can help if you are on a bind. It w ... Hoover F5505 SteamVac Spot Vacuum

I have a Hoover power max self propelled vacuum. The belt that goes to the self propelled part keeps slipping off. I've had the belt replaced, but the problem persists. What can be wrong? I've taken it to a Sew N Vac repair, but all he did was replace the belt again. And it still has the same problem.


I can guess of one problembelt gets removed when motor is running right?am assuming that belt is fit tightly and fits correctly when motor is in restif so then ur motor is not running at a proper speed which can be a pos ... Vacuums

Detergent does not dispense hoover max extract 77


... Hoover Vacuums

Hoover Max Extract Dual V Carpet Washer sprayer on hose leaks and button on hose that controls spray sticks causing continuous spray. Solution?


... Vacuums

Brand new hoover steam vac max extract. brushes won't spin. I have check connections, read the manual and nothing. have the switch to power scrub. works with hand tool.


... Hoover Vacuums

Hoover Max Extract 77 nozzle end of upholstery hose leaks drops of water


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Have called hoover about brushes they are saying that it is the whole motor and would be cheaper to by a new machine altogether. What do you think? Can just the turbine be replaced and if so what is approx cost? Is this something I can do simply by myself? If so how? thanks so much, Mel


You can get just the turbine. You would have to take the top cover off to do that. They are I believe around $50-$60 for one. Take the brush block out, then remove the screws from the bottom. There will be 2 long screws, they go into the turbine. ... Vacuums

How to replace turbine gear on Hoover model F7425-900?


... Hoover Vacuums

Hoover Max Extract 77 - Brushes stopped spinning


... Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum

The brushes on buttom dont spin already exchanged it cause first one did not work either . I have the Hoover Max Extract 77


Is there a switch for TOOLS or VACUUM? ... Hoover Vacuums

Hoover Max Extract 77 fills the dirty water tank with clean water from the clean tank.


... Hoover Vacuums

Fairly new Platinum series Hoover Max extract wont turn on


I have the same problem. Fairly new machine, only been used a handful of times and now it wont turn on. ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0792 seconds