Having problems with your Hoover F7452-900 SteamVac Upright Vacuum ?

Hand tool srayer leaks

\015 I take srayer apart and reset but it starts leaking and not spraying very soon\015

Answers :

Repair Help & Product Troubleshooting for Hoover F7452-900 SteamVac Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hand tool srayer leaks


... Hoover F7452-900 SteamVac Upright Vacuum

Model 5835-900 leaks when using the hand tool


Take the 4 screws that hold the hood out and remove the hood. Hook up the hand tool line and watch for where the water comes out. It is more than likely the tool valve has failed. This is the part here:http://vacuummedic.com/product.php?id=23 ... Hoover F5835900 Upright Steam Vacuum

My Hoover Carpet Cleaner is leaking out the bottom when I use the hand tool


This could be the little white valve that the water comes out of, if its leaking from here or if its leaking at the bottom of the machine it could be the pump ... Hoover F5906-900 Upright Steam Vacuum

Rug doctor hand tool will not spray ...but it will vaccum....what can I do to get the hand tool to spray again ....tried another hand tool and that didn't work either ....help


... Vacuums

I have a Hoover SteamVac F5914-900 SpinScrub... The last time I used the hand tool attachment, it worked fine. Just tried to use it again, and now I only drips of water will come out of the hand sprayer, if that. I have tried prepping it for up to 15 seconds like the manual says... no luck with that. Also it is making a big puddle on the floor, probably because the brushes on the main unit keep spinning when I am trying to use the hand tool which I dont think they are supposed to do? Can a


The brushes can be turned off on most of them via a switch on the hood. There shouldn't be water coming out onto the floor unless you are pulling the trigger at that top. You probably broke this when attempting to use the tools. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover Max Extract LS F6056900 Hand Tool not working / Cleaning Solution I need to know what I need to get in order to have the hand tool work on this model. Also, what cleaning solution is best for pet stains? Tried cleaning, pre-treating with Spot Shot and towel and/or scrub brush, then cleaning, still doesn't work. PLEASE HELP!!


... Vacuums

I have the Bissell Proheat (7901) It will pick up water and the hand tool works fine. I noticed that the red indicator stopped spinning. Then I noticed no water was coming out. If I put down water using the hand tool, the vacunme will pick it up. When I called Bissell they had me do something with the indicator. When it didn't work they said take it in for repair.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

My hose tools wont pick up. when hose tools unattached suction is fine and will **** my hand fiercely, but once tool attached no suction..... how am i gonna pick up cat hair from seats now?! its a dyson DC04 but it wouldnt let me choose that!


I have a DC04 and the hose tools are a open hole.The only reason they want pick up is they are blocked.If you say they are sucking your hand when not attached.Make sure the hose is not blocked by taking off the cover at the front.Allso check the cyli ... Dyson DC07 Allergy Blue/Turquoise Bagless Upright Cyclonic Vacuum

Hoover steamvac spinbrush leaks bottom when attaching cleaning tool


... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

Hoover SteamVac Plus 1200 upright hot water extractor Water/carpet cleaner applying o.k. Suction on the "floor" does not work. Suction on the hand tool works somewhat, but water is not collecting in the bucket. There is suction coming from the floor but water is not going into the bucket. It does not appear to be clogged because I can feel with my hand that air is flowing from the floor. The water is not being sucked into the bucket.


... Hoover Vacuums

When using the floor configuration, I can't get the trigger to cause a spray of either water or cleaner. When using the tool configuration and the hand device with brushes etc, the spray works well with the hand trigger.


The trigger on the handle for tthe floor configuration has become loose or broken. When you squeeze it, the action pulls a rod that runs down the length of the shaft and goes into the base and allows the water to spray. You need to check and make sur ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

My Hoover steam vac is stuck on the tools setting and wont stop leaking water from the tools hose


... Hoover Vacuums

Have installed a new pump but seems to have air in the pipes will not spray water from both the main tool and the hand tool


... Bissell Powersteamer 1694 Upright Vacuum

I got a Dirt Devil Versatile 3 in 1 design hand vaccum for a birthday present This has a suction type of cleaning. I would like a hand held lightweight vaccum cleaner with a roller type brush and cervice tool. I would like to clean carpeted steps. I want to return the above cleaner and get a voucher for another cleaner.


... Dirt Devil Vacuums

Hand tool to hoover steamvac does not suck back up the water


... Hoover F5900-900 Upright Steam Vacuum

I had to take apart hand tool for steam vac and now I cant get it back together. Please help.


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Replace the switch that controls hand tools to the upright unit


If that flap isn't moving when you turn the knob for floor or hose, then yes it is broken, part #2136988 is the diverter valve. You will have to remove the top cover, it mounts on the underside of it. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Cant get hand tool to work on bisell lift off carpet cleaner


... Bissell Lift-Off Pet Deep Cleaner

Can not figure out how I have to attach the Powered hand Tool


Just got connected it to the main hose and press the switch on ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

Are there hand tools you can use with Kirby shampooer?


I love my Kirby and shampooer, but I am wondering if there are any ways to clean stains in small/tight spaces (in corners, between furniture, etc)... my old carpet shampooer had a "hand tool" attachment with spinning brushes, but I don't see an ... Kirby Ultimate G Bagged Upright Vacuum

Unit-hand tool switch


Maybe this picture will help, most vacuum repair shops should be able to get the part you need. You can also try bissell.com. \015\012\015\012 ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My hoover steamvac turbopower 5000ls will not spray for hand tool


My turbo 5200 will not pick up the moister into container to dry does anyone know what the problem may be ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Dyson animal D28 suction on floor vacuum mode is so strong I can't push the machine. Last used for hand tools, is there some mechanism that is stuck?


... Vacuums

No spray out of hand tool on hoover f5915-900


Same problem here, did you ever find a solution? ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0220 seconds