Having problems with your Hoover Floormate H3000 Upright Wet/Dry Vacuum ?
BROKEN WATER CHANNEL
\015 HOSE IS SPLIT. HOW DOES ONE UNASSEMBLE THE UNIT TO REPLACE IT?\015
This type of service is recommended for a vac shop. I would take it to a trusted vac shop for an estimate only.this model is an older one and you may have more issues. the repair can be done if this is all that it needs
Repair Help & Product Troubleshooting for Hoover Floormate H3000 Upright Wet/Dry Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Broken Water Channel Hose Assembly
Hello....do you have the user manual ... Hoover Floormate H3000 Upright Wet/Dry Vacuum
BROKEN WATER CHANNEL
This type of service is recommended for a vac shop. I would take it to a trusted vac shop for an estimate only.this model is an older one and you may have more issues. the repair can be done if this is all that it needs ... Hoover Floormate H3000 Upright Wet/Dry Vacuum
Hoover SteamVac Model F6056-900 SteamVac/SpinScrub. Indicator light and high pitch suction noise indicates that dirty water tank is full. However, water level indicator (yellow bobbing plastic thing) is at the bottom of the tank and there is no water in the tank. Have check all the hoses for clogs, none found. Checked water port from motor area to receptacle tank for clogs, none found. Fixed broken hose to upholstery wand with duck tape, (wire not broken, just cracked plastic hose). The onl
There are 2 filters, make sure they are clean, one is on the tank lid, the other is from the bottom, it is red, pull it out and clean it. If yours has a foam filter on the tank lid covering the yellow ball, make sure there is at least a 1/4 in. gap ... Hoover Vacuums
Is this free? i have a bissell carpet cleaner and i cannot get the soap and water to come out. it will **** up the dirty water however. i just found the belt is broken but i can see no way of how to put a new one in. is a broken belt the reason no soap is coming out?
If it is the flat belt that broke, that is the pump belt, the pump can't work without it. To replace the belts, turn the unit over, remove the red holder, has one screw, pull it out, then the brush roll will come loose. You can replace the belts th ... Bissell Powersteamer 1694 Upright Vacuum
My Delonghi DSS50 steam floor cleaner water reservoir has a broken valve on the bottom where it fits into the steam unit. It leaks water rather than producing steam. I would like to find the valve and replace it or buy a new water reservoir with the valve in it. I cannot find the part I need. Can you help me?
... DeLonghi DSS50 Scopa Upright Steam Vacuum
Water Leakage We have a Bissell Proheat (Pro Tech). I don't think it is the 2X model. When releasing the water with the knob on the handle, water comes out the side of the housing at the lower part of the unit. Is their a seal that my be worn out or broken. Can you give us some ideas before we take it to an expensive repair man to fix
Check the water bottle. Ours has been doing the same but putting a bit of j cloth between what they call the o ring and the cap fixed it. Really you need a new bottle assembly ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum
I own a vaporetinni steam cleaner[PGEU0001]and have broken the water tank. Where and how can I obtain a replacement water tank HR Williams
Water will not spray from floor nozzle but will spray from upholstery nozzle--solenoid broken? Bissell proheat 2X--took apart water is to the solenoid but not past it
Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
I have a Bissell Little Green Scruber Model #1720-W that has a broken clip which secures the solution/clean water tank to the front of the machine. Where can I purchase the clip to repair this machine
Broken water tank on steam vac duel w/rinse #f7205-910
If this is a Hoover, you can go to thehooverstore.com and order what you need. But you will need your model number. You will have to replace the tank. ... Vacuums
Broken water tank for prolex steam mop item 267856 can I get a replacement
The clip that secures the Solution/Clean water tank on my Bissell Little Green Model #1720-W is broken so that the tank does not stay in place on the machine
... Bissell 1720-1 Little Green Wet/Dry Vacuum
I have a hoover power scrub steamvac, the main soap dispenser trigger on the handle click when pressed and does not work (broken spring??) the other soap triggers on the hose and the trigger on top to dispense extra water both work. Can I fix the main trigger myself?
How do i replace the water channel/ hose assembly on a Hoover Floormate H3000 ?
... Hoover Floormate H3000 Upright Wet/Dry Vacuum
My bissell will not spray out water or soap. I checked the belt and it is not broken. bissell is only 6 months old and i have only used it 3 times. can you help me
It could be the water pump blocked up or the jet with old sope,,,its best to flush them through with clean water before you put them away after use,,, ... Vacuums
Bissell - Model 1697 - Powersteamer Pro - Carpet Cleaner I took the unit apart to replace some broken pieces and I can not seat the bottom to the top without properly engaging the soap/water mixer. What is the proper assembly procedure. What is the orientation of the water/soap mix valve when I seat the top to the bottom? The soap/water mix valve needs to engage the knob screw threads but this assembly is a blind operation. Do I turn to the soap/water mix knob to water only then seat the
Hi,\015\012http://dl.owneriq.net/7/7e477b7e-4440-49cf-a219-b68d301549e3.pdf\015\012This diagram will help you see the diagram plus the part assembly no and place it accordingly.I have also given link for Bissell - Model ... Vacuums
I bought new belts to replace the old ones (one had broken and the water would not feed) My cousin took it apart and now I need to put the new belts on and get it back together - do you have instructions or a diagram?
There are different variations with Bissell. They have the ProHeat series and a Power Turbo series. Below is a link with instructions and diagrams for the Belt Access Door. If this doesn't solve your problem or isn't the correct model, please post ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
Shark Floor steam cleaner, about 6 months old, was working and when I stopped to refill w/ water the light wouldn't come back on/no steam. Is it broken completely?
Hi,Probably done...yep...Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-P ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
Bissell proheat self propelled series 7950 won't spray water and pump belt isn't broken.
I'm having the same issue and it was the pump. The metal drive gear sheared off of the plastic pump shaft. I JB Welded it back together, now I just need a schematic to reassemble the cleaner. ... Bissell 7950 ProHeat Upright Wet/Dry Vacuum
Bissel shampooer I have a bissell shampooer powersteamer power brush model 1694-W. I cant get it to dispense water onto the carpet anymore. I think it's because I let my 3 year old ride on it while I was shampooing. I assume I have depressed some special little part that is now broken or mashed or something. Stupid I know....
Yes there is a belt on the side that will need to be changed ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
Constsntly applys water even when shut off/ not running took apart handle I believe trigger is broken
Hi there SmartAlec from NelsonVacuums.com.au here. The trigger definately could be broken but before you take it to a repairer i would really thouroughly clean any little f ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
Low suction My old rainbow seized up. I purchased another one on e-bay. It works but it has a broken latch on the side and it has low suction. Even when I press down so it is sealed to the water can it doesn't inprove the suction.
\015\012\015\012\015\012With years of use, you will collect a layer of "micro dust" on the impeller (the fan part) which reduces the efficiency. A toothbrush and some mild cleaner with gently scrubbing will restore it's power. \015\012 ... Rainbow E series Canister Wet/Dry Vacuum
Bissell proheat turbo 2x upright cleaner .there is no water being released onto the carpet, does this mean the belt is broken?
Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
I have a Hoover SteamVac Carpet Cleaner with Clean Surge. I lent it to my mother who used it without the brush attached underneath. Now it doesn?t **** up water and the brushes don?t turn. Any idea what would?ve broken? Is there a belt that would have burned out? The motor? Anthing I could fix myself, or would I need service for this?
If you go to this URL:\015\012\015\012http://www.vacpartswarehouse.com/Hoover-F7452-s/811.htm\015\012\015\012you will an exploded view of your Hoover. By going down the pictures you will be able to see the internal parts of the unit and ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
My steam mop is not steaming to the floor. It seems to be steaming at the top of the water container not on the part that mops the floor. Is there a way to fix this or is it broken ? ?(
Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop ProblemHere also is a link to get any of the ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum