Having problems with your Hoover Floormate H3000 Upright Wet/Dry Vacuum ?
Taking off the cover
\015 Any idea on how to take off the cover the the Hoover Floor Mate? I have to replace the water channel hose and I can't tell which screws to remove or if it snaps in place somehow.\015
Maybe this pic will help. There are screws and some pieces do snap together. These are very diffuicult to work on.
Repair Help & Product Troubleshooting for Hoover Floormate H3000 Upright Wet/Dry Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Have oiled my Bernina 707 minimatic 1970 sewing machine and I have power when I press the foot pedal, but when the handwheel is tensioned none of the mechanism under the free arm cover plate moves. I went to sew something and the needle jammed. I took the covers off and there is no debris - it was all oiled and left overnight. Now the Take up lever doesn't move and is in the down position.
I need to take off the top cover of the vacuum
... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Taking off the cover
Maybe this pic will help. There are screws and some pieces do snap together. These are very diffuicult to work on. \015\012\015\012 ... Hoover Floormate H3000 Upright Wet/Dry Vacuum
How do you take the canopy cover off of a kenmore cannister vac?
Flip the vac upside down and look for two screws from the underside near the wheels. If they are not visible you will need to remove hidden screws from above by prying gently at the back of the vac where the body panels meet at the bumper. Also look ... Kenmore Vacuums
I am trying to replace the cable on a Hoover smart cyclone, however after taking all the screws out I can see the cover remains intact Can anyone help?
... Hoover Clean Smart Cyclonic Upright Vacuum
How do you take the brush cover off to fix the belt?
... Shark Navigator Bagless Upright Vacuum
Just had my dc24 for 6 weeks - decided to wash filters - do the filters stay in their plastic covers? They were a bit dirty but no visible dirt came out when i washed them 9in their plastic casings). Surely they will take ages to dry.
Hi there,\015\012\015\012To confirm, the filters do stay in their plastic casing when you wash them.\015\012\015\012You may find it helpful to refer to this Dyson video guide, which demonstrates each step in the filter wash pr ... Dyson Ball DC24 Bagless Upright Vacuum
Do I take off the dry bag and the fome cover when picking up moisture ???
Dont know what model you have, but, as a rule, the dry bag is for dry vacuuming and the foam is for wet vacuuming. ... Shop Vac Shop-Vac& Mini Hang Up Wet/Dry Vac Vacuum
I tried to shred a credit card and it will not go in reverse or forward. What tool do I use to take the cover off to remove it.
First of all, unplug the shredder. You could use either option, try the first one, first.1) Unwind a metal paper clip and use those and tweezers to pull the shards out of the tines of the shredder. 2) The Dollar store sells ... Vacuums
The brushes spin very, very slowly and stop altogether sometimes - like they just don't have any power behind them.I've cleaned the brushes and also turned it on without the brushes inside to see if the female plug that the brushes go into turns - it does, but not very fast. My husband said he thought he smelled something - like burning. Is there a way to take the underside cover off and clean something?
... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
It is making a racket when i turn it on. I took the brush off and cleaned it it is not the belt i don't know how to take the cover off the top front so i can look near the motor can you help please. [email protected] .com Thank you Staci Bishop
These units have two screws that hold the "hood" in place. With the belt/brush roll cover off look on the underside for the heads of these screws. Once these are removed the top should come off. ... Hoover U5096-930 Bagged Upright Vacuum
I HAVE A HOOVER VACCUM CLEANER MODEL U8172-900. i HAVE TAKEN IT APART AND CANNOT TAKE THE TOP COVER OFF TO CHANGE THE BELT. CAN YOU HELP ME?
This must be a Savvy, Take off the plate covering the brush roll, then take out 2 screws from the bottom, turn it over, remove the Hoover emblem, there is another ***** there. Then the top cover will come off. ... Vacuums
My machine wont pick up the dirty water. If I take the cover off the recovery tank there is a lot of suction but it wont **** up the water. my carpet is soaked. What can I do
At power head clean out area before power head also look for small hose and clean out and look at rollers,i hope this works if you have directions still they should be able to help you out some more.thanks ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
This was very helpful but I still cant find the motor spindle to attach the belt to. Do I have to take the entire plastic base cover off?
Not sure who helped you, was it me?\015\012\015\012Go to this URL:\015\012\015\012http://www.hoover.com/pdfs/manuals/U5167900.pdf\015\012\015\012In figures 3-21 to 3-23 you will see how the new belt i ... Hoover Elite U5061-900 Bagged Upright Vacuum
I'm using my Nexxtech rapid lcd battery charger for the first time and some of the the battery indicators have been flashing for days. Also the plastic cover keep falling forward. Have I got a dud and if so how can I get it replaced? I'm going way for 1 month this weekend and need to take it with me. Thanks.
Dc11 dyson the brush head turns very slowly but when i take brush head cover of (the yellow part) and put my hand over the suction inlet part the brush head turns really fast. Have cleaned out collection chambers eg the hoover bag have washed the sponge with the little pictures of taps on it what now . thanks alan
I have taken the brush heads off and pulled all the hair out of the small gap between the chrome shaft and the plastic gear housing. Then a small amount of 3-in-1 oil into that gap to lube the internals and just a little through the air intake on th ... Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum
Same here... I have a DC-15 Animal, it was making a clogged type noise and before I had time to react, it stopped working and I smelled burning rubber. I also noticed that the ball was really hot. It's too late to call support, but I intend on doing so in the morning. I've only had my Dyson for a year, so I'm sure it's covered, however, I have no idea where my receipt is. Did they take care of your issue?
You sucked up something that stopped the brush from turning. This made the belt slip causing a burning smell. ... Dyson DC14 Bagless Upright Cyclonic Vacuum
We have a bosch vacuum cleaner mod.VBBS550N00 the cord will not retract and I can not see any screws to take the cover off so I can figure out why it does not retract!!
... Bosch 12-Amp Formula Canister Vacuum with Hepa Filtration Bagged Vacuum
When I plug in my S538 Miele vacuum there is no power no nothing going on. Want to take off the cover to check the power switch. How do I do that?
I recently put a call into dyson regarding a problem with my vaccuum and a supervisor was supposed to get back to me. no one has. back in august, we were on the phone with a technician regarding a problem with out machine. after trying a list of things, she said to take it to american vaccuum services and it would be covered by dyson. when i did, the man told me it was clogged and i would owe $45. i would not have taken it for that price! please advise as now i am stuck. i want my vaccuum and th
Unless you can Dyson to intervene and have this repair covered under their warranty, You are stuck to pay for the service. Clogs may not be covered under warranty, but I don't know how their warranty states. If it says that if you have a problem, t ... Vacuums
The brushes won't turn. I want to fix it myself but can't figure out how to get to the drive mechanism, by taking the top cover off. I have all the screws out but it seems to have some snap fits holdi
If you turn the vacuum over and are able to turn the brush by hand and it won't turn while its running, then your belt has broken. ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum
Hoover u6632900 the self propelled black plastic piece that the cable attaches to is broken. how do i take the cover off to get to the piece and replace it?
... Hoover U6616-900 WindTunnel Bagless Upright Vacuum
Hoover F5809 Hello, I seen a few of your post and was hoping you could help me. I just became a member today. My sister gave me her old Hoover Steam Vac-Model F5809. This thing is so dirty and clogged because my sister has pets. So far I've gotten it all taken apart to clean it. I'm not a newbie and taking apart and fixing things. I have fixed things like microwaves, washers, dryers, dishwashers (still learning about TV's-very hard, hehe). Anyway, I got what I believe to be the motor cover off.
That cover is the called the fan cover and is usually pressed on. Tapping on the edge with a flat blade, you may be able to get it off and hope you don't bend it up, you will to put it back on tight enough so it will stay in place. Another thing to ... Vacuums
Vacuum brush Well thank you for your response but how do you remove the brush cover plate? I looked to see if I could unscrew it but i dont see any screws. I don't know how to take it off
... Kenmore 22812 Bagged Canister Vacuum
Squeaky wheel I don't want to take apart more than I have to. The front cover has been removed and I tried using WD40 on the squeaky areas but the problem has not been resolved.
... Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow