Having problems with your Hoover Fusion Plus Cyclonic Upright Vacuum Vacuum ?

My fusion just stopped. i was vaccuuming and it

\015 My fusion just stopped. i was vaccuuming and it quit. i changed different outlets and dumped the canister and still nothing.\015

Answers :

One item to check is this: This unit has a temperature overheat device.
\015\012Unplug the unit for 20 minutes, then plug in and turn on the switch. If there was a blockage in the hose/cup/filters, this could cause the overheating.
\015\012If this does not resolve the problem, it will need disassembled and checked with a continuity meter to determine the component that failed (motor, switch, cord, or TCO)
Repair Help & Product Troubleshooting for Hoover Fusion Plus Cyclonic Upright Vacuum Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My fusion just stopped. i was vaccuuming and it

One item to check is this: This unit has a temperature overheat device.\015\012Unplug the unit for 20 minutes, then plug in and turn on the switch. If there was a blockage in the hose/cup/filters, this could cause the overheating.\015\0 ... Hoover Fusion Plus Cyclonic Upright Vacuum Vacuum

My vaccuum has lost suction. I changed the bag and cleaned everything out. The vaccuum is only 6 years old. I even replaced the belt around the brush. When I turn the vaccuum on it smells like burning rubber. My vaccuum is an upright 12 amp model #33000300C serial #Y347012385

... Kenmore Vacuums

Dyson vacuum I have a DC07 vaccuum. The problem I am having is that the front does not want to stay down as I vaccuum and I continuously have to keep stepping on the front to make it go back down to the floor. It seems as though there is either not enough weight in the front or possibly the unit just has to be broken in so that there is not so much resistance between the handle and the front of the vaccuum. Could there be something I did not remove or is this typical on these vaccuums?

There is some thing broken it is two plastic cogs they help the front go down and stay up you will have to get a star screw driver and there should be two screws on top and two at the b ... Dyson DC07 Bagless Upright Cyclonic Vacuum

On my M&S Air Vac AV425 central vaccuum system, the system usually turns on by inserting the vaccuum hose into one of the vaccuum outlets. However, it now runs continuously. I am able to turn it off only by unplugging the vaccuum from the electrical outlet. I would like to know how to trouble shoot the problem or how to find someone who services Air Vac systems in the Bridgewater, New jersey area.

We are a central vacuum service company and we service all of new jersey. sounds like you have a short some where that keeps your unit running or it could be your relay module thats stuck our number is 908-721-7595 its j&j central vacuum services ... Vacuums

The hose works great, but the head of the vaccuum does not pick up anything !!! I checked every opening that may have been clogged, but nothing came up. When I hold my hand under the brush/roller, it seems to be putting out more air than intaking air. Particles "dance" on the carpet, but don't get "sucked up" into the vaccuum ? I have had the vaccuum only 1 year, so the brushes should not be a problem. I changed the bag, and checked the belt. The belt and brushes seem to be OK. ?

Hi there,Uprights are notorious for debris forming clogs when changing direction. The 90 degree turn where the base suction goes up. Have a closer look . You may need to pull the base plate off to access the blockage.Best reg ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

No Suction The suction of the vaccuum has stopped. We haven't had the vaccuum for very long and the bag has been recently changed. Both the floor vaccuum and the hose are not picking anything up. I'm not sure what the problem could be.

Your Power head is blocked with hair or dirt,,or the hose which connects the Upright with the power head is blocked.Try taking a steel coat hanger apart (straighten it out) and then push it into the pickup hose to remove blockage. ... Eureka Smartvac 4870 Bagged Upright Vacuum

Vaccuum Burnout? Is there a reset button on the Infinity Shark Vaccuum? The vaccuum got plugged with a dryer sheet and the motor may be burned out but I'm not sure at this point. Can anyone suggest what to do? Cheers, Vince email: [email protected]

Will the brush turn by hand ok, or is it froze up, some models have a reset on the back near the bottom, there could be a fuse, take the bag door off, near the top of the vacuum, there maty be a cover to remove, if there is a fuse it would be in the ... Vacuums

I recently put a call into dyson regarding a problem with my vaccuum and a supervisor was supposed to get back to me. no one has. back in august, we were on the phone with a technician regarding a problem with out machine. after trying a list of things, she said to take it to american vaccuum services and it would be covered by dyson. when i did, the man told me it was clogged and i would owe $45. i would not have taken it for that price! please advise as now i am stuck. i want my vaccuum and th

Unless you can Dyson to intervene and have this repair covered under their warranty, You are stuck to pay for the service. Clogs may not be covered under warranty, but I don't know how their warranty states. If it says that if you have a problem, t ... Vacuums

Took my vaccuum in for service recently and not sure I got my vaccuum back. Doesn't work very good and looks a little different to me. Trying to verify the serial number to compare to my records....is it the bar code number on the bottom?

The serial number for all "G" models, containing 10 digits, is located on the side of the machine above the hole the bag attaches to. ... Kirby Ultimate G Bagged Upright Vacuum

Shark rotator the lights and stuff still turn on but the vaccuum will not suck. If the lights didnt turn on i would just think the vaccuum quit working all together. ive emptied it, cleaned the filter and made sure theres nothing clogging it.

... Vacuums

My son spilled mica all over my carpet. To clean it I used my bissel vaccuum. Now I have orange mica in the removable filter area as well as up inside the part that spins. I need to clean it out, but don't know how to remove it from the vaccuum

Load it into the trunk of your car, take it to a gas station and use the tire inflater hose to blow all the **** out of it.\015\012May have to get a tire stem in order to use it as a blower. ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

There is an "exhaust" pipe of sorts in the lower back part of the vaccuum. Most of the dust and specially pet hair just flies out of there and up in the air. It looks like more stuff comes out than stays in the vaccuum. I'm wondering if there should be something connected to that pipe? Vacuum assembled as per instructions out of the box (installing handle).

Something is wrong ... there should not be any dirt coming out as you describe ...\015\012\015\012I'm sorry, based on what you have told me ... I can't go further ... you know ... stuff link make and model.\015\012\015\012Than ... Vacuums

Kenmore 26082 Canister Vacuum Shuts off constantly. When Im vaccuuming maybe about 5 minutes later it shuts off. Then give it a few minutes later it turns back on. Whats the problem with this vaccuum

You could have a clog in the hose. Also check your filters, if you haven't changed them in a while, that could be what's suffocating your motor ... Vacuums

My dc14 animal works fine in Vaccuum mode but when I switch to the extendable tool the sound of the vaccuum changes to a higher pitch noise and I get very little suction through the hose. Any suggestion

Your hose has a restriction. To fix this, use a broom handle and insert it into the hose as far as it will go. If the hose can be removed, take it off completely and do this, if not be careful so as to not damage the sweeper with the handle. anoth ... Dyson DC14 Bagless Upright Cyclonic Vacuum

I am in need of a power cord for a shark rechargeable vaccuum # ka12d075015023u i am in miami and would like to order this for my vaccuum

... Euro-Pro Shark Cordless Stick Vacuum SV775R Vacuum

My bissell power force bagless model 6594-w vaccuum is not sucking up when vaccuuming but if i use the hose it works

Remove the bottom plate that covers the brush assembly and check the air passage that goes out where the vacuum is jointed between the vertical parts and the sweeper head. Look for any clog in that area. A bent hook on the end of a piece of coat hang ... Bissell 6594 PowerForce Bagless Upright Vacuum

My Bisell Revolutionary Lift off vaccuum has a high consistent noise. I have changed and cleaned all filters, but the problem still exists. The vaccuum is approximately 1 - 1 1/2 years old.

Did you check the hose and the dirt inlet by the brush roll for a partial blockage? If no blockage, then it may be coming from the main motor, replacing it is the only way to fix it if it is coming from the motor. Also, some people can hear these h ... Vacuums

After vaccuuming for less than five minutes, the vaccuum shuts off and we need to unplug it for 5 minutes before it will restart

It sounds like the motor is getting tripped out. It could be caused by having a clog somewhere in the unit, could also be that your filters are clogged. you have 2 filters on that unit. One is under the canister, looks like a drawer that slides out a ... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

Last year my wife and I bought a new Dirt Devil Reaction All Surface vaccuum cleaner to replace the older Platinum Force. After using it a couple of times the new one gets clogged with dog hair easily and shuts down. I cleaned it out completely including the hepa filter but it will not handle the dog hair. The old one never had a problem and still works. We went back to using the old vaccuum cleaner because we can not find the receipt and had not registered the new one and are stuck with a new 1

Greetings jettin_us,\015\012\015\012Normally you can contact the store you purchased the unit at, and if you paid with anything other than cash, they may be able to retrieve your receipt for you. \015\012\015\012Once you get t ... Vacuums

I vaccuumed water with my kiwivac, central vaccuum and now the motor keeps turning over and over

... Vacuums

My vaccuum is model #U5780-950 series 7112.0. I need to know how to clean my vaccuum. Also I need to register it. All have been misplaced. I tried to email you but my computer would not let me input my correct postal code. My e-mail address is [email protected]

... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

HELP!!!! I am frustrated, I just got a dyson dc07 animal vaccuum in the mail, it came with NO INSTRUCTION MANUAL. This is the most frustrating vaccuum I have EVER USED. It is impossible to figure out things on it without instructions, it is not obvoius. HELP!!!!!!!!!!!! Am not happy. My name is Nancy.

Manual can be downloaded from the Dyson website ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Kenmore vaccuum upright moded#721.33289030 vaccuum worked just fine turned it off for a minute turned it back on the light comes on but theres no power from the motor Please Help thanks Valerie

... Vacuums

Dry/Wet vac is blowing instead of vaccuum

Check to see if the plastic ball is stuck . There should be a ball under the motor , make sure it moves freely. Make sure your vacum lines are not plugged . Best of luck Ed. ... Shop Vac 584-06-00 Canister Wet/Dry Vacuum

Gen 3 model Kirby vaccuum won't start

Checked your bag if they are full, if bagless check your filter. If still not working maybe the protected temperature fuse blown out. You need to open it and replace the protected blown fuse. ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0135 seconds