Having problems with your Hoover H3044 FloorMate SpinScrub Wide-Path Hard-Floor Cleaner Upright Wet Washer ?

Will not dry or suck up water at all...BRAND NEW

\015 Just bought the Hoover FloorMate SpinScrub Hard Floor Cleaner. I have both tile and concrete floors. It dispenses the liquid fine, it works as a vacuum cleaner just fine, but it will not suck up or dry the liquid on the floor at all. I have seen no liquid in the tank, only dust and debris. Yes, I have taken it apart, checked for lose fittings, cracks - anything. Brand new...no suckage! HELP...Scrubs like crazy and I use a towel under each foot to dry my floors and it is amazing how much mucky wet dirty water I am wiping up but I want the machine to do what it is supposed to.\015

Answers :

Hey you guys who tried to answer, but really didn't try...you didn't answer the question. Obviously she has a clog at the intake. How do you solve this? I have the same problem. The intake is teeny. How do you take it apart to unclog it?
If it's brand new your best bet might be taking it to a Hoover service center. That'll have a year warranty on it so the fix would be free.
Repair Help & Product Troubleshooting for Hoover H3044 FloorMate SpinScrub Wide-Path Hard-Floor Cleaner Upright Wet Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Will not dry or suck up water at all...BRAND NEW


Hey you guys who tried to answer, but really didn't try...you didn't answer the question. Obviously she has a clog at the intake. How do you solve this? I have the same problem. The intake is teeny. How do you take it apart to unclog it? ... Hoover H3044 FloorMate SpinScrub Wide-Path Hard-Floor Cleaner Upright Wet Washer

I have a hoover 3000 i have not used in awhile, and since I removed a large rug, I would like to use it again on my slate floor. HOWEVER, I cannot get it to pick up ANY water in the water recovery unit......it is dry, dry, dry. I have put in a new filter, cleaned the nozzle unit, the scrubber , and reconnected both the recovery unit and the water unit several times, but to no avail. I would like to get a graut attachment a well as replacement part, but since I can't get the basic unit to work, I


Have you made sure the plastic filter cover with the round hole in it that covers the filter is in place ( part # 59177096 ). This piece seems to get lost, and without it there is no pick-up. The other common problem is that the wheel assembly has be ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

My water squirts out fine, but the same head which squirts the water has quit sucking it back up! So now I have a ton of water in my carpet (where the dog threw-up) and no way to get it dry!


This is a problem with these machines. There is an elbow in the unit that goes from the rotor brush assembly to the suction hose. Since you have a dog, there is a ton of dog hair that is blocking the elbow and reducing the suction. You can take it a ... Bissell 1425 Little Green ProHeat Handheld Steam Vacuum

My water squirts out fine, but the same head which squirts the water has quit sucking it back up! So now I have a ton of water in my carpet (where the dog threw-up) and no way to get it dry


Look to see if there are any obstructions in the suction path,If the motor is not working,check to see if power is getting to the motor from the switch,and go from there,check all connections,and the power supply(cord)If I can help,any more,please l ... Bissell 1425 Little Green ProHeat Handheld Steam Vacuum

Parts Hi I have the Eurkea steam cleaner model 2450 and was wondering how do you take the front part off where you can see the water sucking up from carpet so this can be cleaned. Also I think the spring in the part that holds the water has come off another part is this able to be fixed or can I just purchase a new water holding tank and if so where? Thanks


Click this link for spare partshttp://www.vacpartswarehouse.com/Eureka-2450-extractor-s/1802.htm ... Vacuums

It is not sucking up the water I have it together right, but I am not getting the dirty water out of the tank It is dry when the water is gone.


Try checking the lint filter to fix your suction problem. It is located in the top clear plastic section (the one with the dial to switch from tool to floor use). It is a small (1 inch square) red plastic filter with a little door on it. Flip open ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I am trying to use the hand tool but the suction isn't working. It spits out the soap and water but it isn't sucking up the water. The machine is brand new so I don't know if I am doing something wrong? I followed the instructions thoroughly.


Welcome to fixya\012\012Hello\012\012 \012\012I have a solution for this ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Our problem with our Rainbow E Series is that it has sucked water up and blown it out through the lower part of the hepa filter, making the filter wet and dirty. This had happened before and the repair shop did not see any problems with the machine, so we replaced the filter and were very carful not to overfill the tank and to change the water often. Now it has happened again and ruined another filter. Do you know what could be causing this issue? Can the filter be cleaned or will a new one be


Thank you for allowing\012us to help, please respond with further questions and concerns\012\012Spanish speaking\012available for all problems\012\012 ... Rainbow E series Canister Wet/Dry Vacuum

I have Bex Bissell Proheat. It is one problem requiring fixing each time I use it. Just had a new pump fitted as water not spraying out. Now the water is not being sucked up. For the money this has not been a good product. When it works it is good. But the constant issues each time it is used is frustrating.


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

I have a new Hoover Dual V steam vac that I bought from a neighbor who only used it once. I have only used it once since then and it worked great. This time, because I am pregnant, I bought some non-toxic cleaner that was much thicker than the very watery Hoover soap. This vac has a wash option and a rinse option. The rinse option works (sprays and sucks properly), but the wash cycle doesn't at all-neither soap nor water comes out. Nothing comes out, but it still sucks. I took everything o


There's a powerful electric motor attached to a fan that sucks in air.Did you checked and cleaned that motor.If the dirt is got stuck up ion the motor then the motor will not spin as per its regular speed.For rinsing the motor spin on one cycl ... Vacuums

I accidentally sucked up water with my miele vacuum and now it won't work. I have dried as much as I can, but apart from leaving it go dry out more, I don't know what I can do.


... Miele S5211 Deep Black Vacuum Cleaner Bagged Canister Vacuum

Heat dry feature not working on hoover spinbrush steamvac. It worked the first few times I used it , but now after sucking up the water the carpet is cold, not warm like it had been on other occasions.


If you are not mechanically able, then you best take it to a service place because it could be the heat element neesd replacement, or the selector switch that turns on the element, or a wiring connection that got loose or burned. Goodluck,Macgivor ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I accidentally sucked up water with my purple dyson slim. I pulled it all apart and waiting for it to dry. Now what?


... Vacuums

Lost Suction This is my second hoover steamvac and i am having the same problem with my new one as i did with the old one that i tossed out. I have used it about 12 times and it worked great the first 6 times... Now i'll empty a full tank of water and only half will get sucked back up. I have tried taking it apart and cleaning and also the rubber seal had some gaps so i sealed those thinking that it was leaking air from there...can anyone help? I am so close to chucking this one and buying somet


Usually when there is no suction, one cause is the lid to the recovery tank is not on all of the way in the back. Also if you have that foam filter on the underneath side of the recovery tank lid, it needs to have a 1/4 in or so gap from the top of ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Hi, have bissell powerbrush deluxe, model 1694-F. just replaced front suction and new tank. Is not sucking water into the tank. Thanks Roxy


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

I have a ridgid wet and dry vac I was sucking up water and now it will not power on is there a reset button


... Ridgid 9 Gallon Wet/Dry Shop Vac 96882 Canister Vacuum

It's brand new - just out of the box! Noticed the dirty water tank is bone dry. There is no suction! The front removable nozzle seems to be loosely attached.. The metal clip doesn't seem to hold it tight. Not sure if that is the problem. But I have a very wet rug! Suggestion?


It sounds as if it wasn't assembled correctly. Was it already put together when you purchased it? It sounds like the Brush Bar Belt never got put on.Let me know if you need more help.Jim ... Bissell 1950-3 Quicksteamer Plus Vacuum

It will not suck up the water - Viper Part Number VA75002 For Shovelnose SN18WD Wet Dry Vacuum


... Viper Part Number VA75002 For Shovelnose SN18WD Wet Dry Vacuum

Went to turn it on after not using for several weeks and it states not ready to brew like usual but after about four minutes it just turns off. Wont let us brew a cup or access the menu even to choose size of cup or anything. It sounds like it's sucking up water to make cup and pokes hole in the coffee but nothing more than that. It is almost brand new


You have posted the fault in the wrong column with no instruction of the make/model.\012Assuming it to be new , Is it passed the warranty period before we take a look ,?\012Just lave it on for sometime and see if there is any change. per ... Vacuums

I have a Bissell Steam Cleaner that is not sucking up the water when cleaning. I used a full container of water and when it was empty I emptied out the water, only to find very little dirty water in it. I noticed the window, as i used it, seemed like it wasnt sucking up the water. I took the plastic cover off to clean it (it didnt look very dirty in the first place), an i noticed that the grey plastic flap was on but not moving up or down. I thought there may be dirt in it that prevented it from


... Bissell Vacuums

My carpet shampooer is not sucking up water?


Hey Karen, having no suction when cleaning can be a bummer. Here's a quick link to troubleshooting steps to assist you:\015\012http://www.bissell.com/F ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell Powerforce Powerbrush carpet shampooer is not sucking water back up


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

My hoover steamvac 5914-900 clean surge is not sucking up water


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have a 5.5 hp craftsman 20 litre wet Dry vacum . I have lost the manual. & have 2 questions 1) how do I change to wet vacum from dry? Also could i use the wet mode with some water in it and let it run while I am sanding dry wall to catch the dust in the water in the container? Thanks


# 1 myou just take the bag out make sure ytou sponge filter is in place athe top and turn it on the power switch just turns on ,machine ther is no wet dry switch just an empty bagless cannister is all you need make sure the ball outlet in vacumn is w ... Vacuums

Won't suck The machine light shows that it is sucking up water this happens on manual and automatic, but no water is deposited in the tank, i do find a lot of water leaking from the machine as well.


... Bissell SpotBot Robotic Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0475 seconds