Having problems with your Hoover Powermax S3601 Bagged Canister Vacuum ?

I need a wiring diagram for the power head, model S3601.

Answers :

\015\012It would be better f you can find the Model Number as some of the manuals are applicable for different models of Hoover vacuums and for this reason the manual may not have the exact name of your cleaner on it.\015\012
\015\012On the back of your cleaner, on the same sticker as the model number, is a manufacturing code (MFG Code) or Serial Number. The last two digits in the code represent the year it was made.\015\012
\015\012Try going to this website to search for the manual once you get the model number.\015\012
\015\012Hope this helps.
Repair Help & Product Troubleshooting for Hoover Powermax S3601 Bagged Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need a wiring diagram for the power head, model S3601.

Hi,\015\012\015\012It would be better f you can find the Model Number as some of the manuals are applicable for different models of Hoover vacuums and for this reason the manual may not have the exact name of your cleaner on it.\015\012\0 ... Hoover Powermax S3601 Bagged Canister Vacuum

Royal vacuum cleaner model 4600 wiring diagram I have a Royal Vacumm Power Tank Model 4600. I replaced the switch (6 wire - 3 position) that is on the tank. One side of the switch control just the blower. The other side control the blower and the POWER head - wand with a variable control speed. The middkle position is off. After I installed the swith, the power head - wand is powered in either position. There are three wires comming out of the wand: White, Red and Black. I guess I wired somethin

... Vacuums

Wiring diagram for Model #11635922500 - KENMORE Upright vac I took the cover off of the vacuum to repair the power cord and must have pulled a wire out of its wire nut by the sweeper bar. If I had a diagram it would be no problem to replace. The bad has four short gray wires coming out of it. It is one of the gray wires that has come loose.

... Kenmore Vacuums

The power wand electrical connection on the power unit itself seems to be corroded. I think I need a new two wire plug to plug into the wand. the model is a Eureka 6984 A. I am able to disassemble the power unit if necessary and replace the wire and plug if one is available

Try hesco inc they have a on line store with all the vacs parts diagrams and fast shipping. ... Eureka Vacuums

I took my durabrand toaster oven model t0-80 apart and i need the wire diagram to put wires back on it cause it needed cleaning.

... Vacuums

Need proper wiring connections inside unit, where they have pulled apart from squeeze connectors.(Wiring diagram needed) Can someone E-Mail this to me? Fritz (an ''old'' mechanic) Folks I have talked to, say there is no specific model number for these units. They are just described by name, and serial #. and I have relayed exactly what was labled on the unit. Please post this and quit asking me to enter a "valid" product.

Fritz , thanks please confirm... there are likely more than 2 leads from the motor?? I have not seen or worked on the Tristar CXL as it is very new.You will have a high low function but: Should the power head function at both spee ... Vacuums

Rowenta Effective Steam Iron DX1700 Need wiring diagram. How do I wire the power cord to the internal Red, Blue, and White wires? What wires are neutral and which are hot?

... Vacuums

Electrolux EL7024A vacuum power head wiring

... Electrolux Vacuums

Heritage 2 - black wire pulled out from motor assembly, comes from power switch. Where does it go? Need wiring pictorial and schematic/wiring diagram. Can anyone please help? Many thanks, Malcolm

... Kirby Heritage II Vacuum

The power head of my 1165581590C Kenmore Power mate Whispertone 12 amp vacuum won't open. It is an older model and it desparately needs a clean!

I am not 100% sure of the model number but most of their powerheads come apart quite easily if you know how. There is a light lens cover on the top of your powerhead. On each side of this cover there is a little clip that holds it in place. You ca ... Vacuums

I have a shark infinity model no. NR90C and I need to purchase a new power head. I need to know where to buy and how much they are

... Infinity Vacuums

Electrolux Model E switch wiring diagram

Hi,\015\012 You may need to trace where the supply comes from, but essentially, you need one black wire from the motor and one from the capacitor to go to ground.\015\012The other capacitor lead needs to attatch to the other motor wire as ... Electrolux UltraLux 2000 Bagged Canister Vacuum

Hi, my power head is not working on model 116 5416083 and I cannot open it up. I think there is a gasket that needs replacing.

If you press on either side of the raised top light cover it will come off. Then you will be able to see the light bulb and two screw heads. Remove the two screws and the ... Vacuums

Need wiring diagram for Kenmore model #116 - Kenmore 25512/ 25513 Progressive Canister Vacuum

... Kenmore 25512/ 25513 Progressive Canister Vacuum

I have a pms4 power management system and i need a installation or wiring diagram for it can you help

... Vacuums

Need a wiring diagram for a Vax Genie model No 52000

... Vacuums

I have a Ferguson step down transformer that takes input as 240V and outputs 115v The model is : TS 115/2000EC I need the wiring diagram for the output side

If it is 240 to 120/115, there should be two high side wires and two low side wires and ground wires, isn't that true?\012Please post back, thanks.\012Gary ... Vacuums


... Filter Queen Majestic Canister Vacuum

I need the part number for the power head to the kenmore Model 116. 22813201

Kenmore or FSP parts will fit. Also take the part to a Panasonic vac dealer ... Vacuums

I have a kenmore whispertone 300, model 116 28612791, serial # DH0809803. I need to take the power head apart to clean it but can't figure out how. I don't have the manual for it. Is there a page of instructions I could print out? Thanks Lisa Coster [email protected]

... Kenmore Vacuums

I have a Broan Nutone central vacuum. The power head seems to stall unless you lift up on the handle. I think I may need to change the belt but cannot find a place to purchase one to see if this is the problem Model number BN180 type 1

You are correct, you need a new belt. You can find belts for the Broan BN180 at www.vacbelts.com. ... Vacuums

The power nozzle on my c141b model aerus electrolux canister vaccum no longer turns on. It was working when a large stringy object was sucked in. When hitting the red reset button, nothing happens. Is it likely that it is the fuse that needs to be replaced? All wires appear intact (I replaced the elbow assembly a few months ago.), and the sweeper moves freely.

It's not a fuse.\015\012Turn the power nozzle on it's top. Try to rotate the brush. If it won't spin, there's till something holding it. Remove all strings, threads, and whatnot from the roller. Try to rotate it again. If it still won't sp ... Vacuums

I have made electrical connention wrong -only power switch works but not the brush. I need electrical wire layout diagram for Bissel 3760-2

Send me your unit.. ... Bissell 37603 Upright Vacuum

I have the new power on/off switch to replace the old one(Rainbow vacuum). However the new switch has 4 contacts & the old one has 6. Need wiring diagram.

Simply pair 1 each of the power head leads and motor leads on to one terminal and wire the cord as on previous switch. ... Rainbow E series Canister Wet/Dry Vacuum

I have a Electrolux Oxygen model 6996 A. The power head and the dog hair hand tool no longer spin. What wouod cause this and what part would I need to replace if necessary. I have owned this for 6 years (7 kids, 2 dogs) and it is an amazaing vacuum! Thank you. Susan

... Eureka Oxygen 6996 Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1054 seconds