Having problems with your Hoover S3765-040 WindTunnel Bagless Canister Vacuum ?

No suction on hoover s3765-040 windtunnel bagless canister vacuum

\015 Itis not a clog in the handle it just has no suction at all but it does have power\015

Answers :

It might need a new belt this link is for manual
http://hoover.com/file/402/
Repair Help & Product Troubleshooting for Hoover S3765-040 WindTunnel Bagless Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No suction on hoover s3765-040 windtunnel bagless canister vacuum


It might need a new belt this link is for manualhttp://hoover.com/file/402/ ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

Need help with Hoover S3765-040 WindTunnel Electronic Bagless Canister Vacuum. The belt that rotates the brush keeps slipping off. what to do?


The belt could be stretched and that could be causing the slip. Or you could have the wrong belt if you've replaced it recently ... Vacuums

Hoover windtunnel bagless canister fuse - Hoover S3755 WindTunnel Bagless Canister Vacuum


... Hoover S3755 WindTunnel Bagless Canister Vacuum

Suction will not turn on - Hoover S3755 WindTunnel Bagless Canister Vacuum


Might be the switch is faulty or the vacuum motor is not being activated or the motor by itself is defective.\012You might have eto take a look through the wiring to confirm if the volatge flows from the switch to the motor. ... Hoover S3755 WindTunnel Bagless Canister Vacuum

No longer pick ups - Hoover S3765-040 WindTunnel Bagless Canister Vacuum


You need to replace the belt. It won't pick up if the belt is worn or stretched. Here is the belt you need:Hoover S3765040 Belt ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

Powerhead works but suction - Hoover S3755 WindTunnel Bagless Canister Vacuum


... Hoover S3755 WindTunnel Bagless Canister Vacuum

No power My Hoover S3765-040 WindTunnel Bagless Canister Vacuum does not seem to receive electricity to power the vacum. One day it worked and the next it did not. Any recommendations for a solution.


... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

Hoover Windtunnel model 6626 900 no suction - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Hoover powerhead not working - Hoover S3755 WindTunnel Bagless Canister Vacuum


... Hoover S3755 WindTunnel Bagless Canister Vacuum

REPLACING SUCTION HOSE - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Red light stays on Hoover windtunnel t series and when vacuuming loss of suction, and debris is not going to canister, but I've checked/cleared all blockages


... Vacuums

Dc 14 suction loss from bottom - Hoover U8361-900 WindTunnel 2 Bagless Upright Cyclonic Vacuum


... Hoover U8361-900 WindTunnel 2 Bagless Upright Cyclonic Vacuum

No suction with Hoover Elite cyclonic bagless canister vacuum


Check your air way to make sure it is not plugged and then if ok you may have to change the filter ... Vacuums

Hoover canister vacuum (windtunnel)- turned it on and it had good suction, then smoke came out and it smells like something is burning. Is it the motor burning up or something else?


Probably the belt..\015\012Turn it over so the bottom is facing up..\015\012Remove the plate that surounds the brush..\015\012Check to se if brush is spinning frely and that the belt is on there poroper ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Hoover WindTunnel S3765. The motor spins and the belt turns when I turn the brushes on, and the brushes will spin. The problem is that when I do this on carpet, the brushes stop spinning. As soon as I pull the "head" off the carpet, the brushes spin again. It's almost as if the vacuum suction is too great. I took the head apart and watched the motor turn the metal spindle that the belt rests on, and the belt turns as well.


The belt is stretched and needs replacement.(Belt # 38528036) . The brush is not turning against resistance. ... Hoover Vacuums

My hoover U5720950 windtunnel bagless vacuum loses suction when I lower the handle.


When you lower the handel it is pinching the vaccume line constricting suction ... Vacuums

Brush does not rotate belt is good no jam - Maytag Hoover WindTunnel S3755 Vacuum (Canister Bagless HEPA)


... Maytag Hoover WindTunnel S3755 Vacuum (Canister Bagless HEPA)

Belt works fine but there is no suction - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


This usually indicates a clog in the hose and airflow system. It's most likely to be behind the filter in the tank or in the power head area.\015\012Detach hose from power head and look inside. If you can't see anything, try dropping a penny ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Hoover S3755 WindTunnel Bagless Canister Vacuum brush not spinning


The belt might be streched or broken,also you could have dirt in the bearings on each end of the brush bar. either one of those will cause it not to turn. You will have to remove the brush bar to check that is does not have debris in it. you cant tel ... Vacuums

I have a hoover windtunnel bagless vac that is several years old. the floor vacuum part still works fine, but the handtool attachment has no suction and is useless all of a sudden.


Don't have your model number, but some have a valve down on the noozle part that may be broke. When it is its upright position, the valve won't change over to the hose only position. You would have to remove the top cover to see this. ... Vacuums

Weak suction - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


Take all hoses off and check for blockage from top to bottom. If there is not any blockage, then check the motor, sounds as if you are not getting enough power out of the motor ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Hoover Windtunnel vacuum has no suction


... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

No suction into canister on Hoover Windtunnel U6630-900


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Hoover Bagless WindTunnel vacuum cleaner.


Very easy. you have clog. take the brush off look where the hole is thats where the clog is. it might be in there you might have to take the housing off of the motor ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Loss of suction in my Hoover Windtunnel bagless selfpropelled upright


There's also the possibility that the fan/impeller has stripped loose from the motor shaft and is basically sitting there while the motor turns. Also, you may have broken vanes on the fan/impeller that will drastically reduce the suction. Replacemen ... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1434 seconds