Having problems with your Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum ?

Loss of suction in my Hoover Windtunnel bagless selfpropelled upright

\015 There is not enough suction in the hose to run the upholstery tool, and there isn't really enough suction to pick up a paper clip throught he lower unit. The belts are fine, I've taken the panel off the back and exposed the plenum where the hoses come together and there are NO clogs anywhere to be found (I've completely exposed the dirt path from the hoses to the dirt collector). Is it possible that the blower itself has been damaged enough so that the machine is not generating enough VACUUM? This machine used to, but it doesn't **** anymore.\015

Answers :

There's also the possibility that the fan/impeller has stripped loose from the motor shaft and is basically sitting there while the motor turns. Also, you may have broken vanes on the fan/impeller that will drastically reduce the suction. Replacement fans aren't very expensive to replace if it's stripped or broken.
Did you check the dirt inlet by the brush roll, filters ok, they should be replaced once a year. Belts can look fine, but if they are a few months old, I am sure they have stretched and the brush roll will not turn like it should under load. It is possible that the motor isn't running up to speed, thereby reducing suction.
Repair Help & Product Troubleshooting for Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Loss of suction in my Hoover Windtunnel bagless selfpropelled upright


There's also the possibility that the fan/impeller has stripped loose from the motor shaft and is basically sitting there while the motor turns. Also, you may have broken vanes on the fan/impeller that will drastically reduce the suction. Replacemen ... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

Dc 14 suction loss from bottom - Hoover U8361-900 WindTunnel 2 Bagless Upright Cyclonic Vacuum


... Hoover U8361-900 WindTunnel 2 Bagless Upright Cyclonic Vacuum

Hoover Windtunnel model 6626 900 no suction - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Belt works fine but there is no suction - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


This usually indicates a clog in the hose and airflow system. It's most likely to be behind the filter in the tank or in the power head area.\015\012Detach hose from power head and look inside. If you can't see anything, try dropping a penny ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

REPLACING SUCTION HOSE - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Weak suction - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


Take all hoses off and check for blockage from top to bottom. If there is not any blockage, then check the motor, sounds as if you are not getting enough power out of the motor ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Hoover windtunnel hose clogged - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

How to install hoover idler arm - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Ball bearing fell out of hoover - Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum


... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

Hoover cord will not retract - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Hoover vacuum alignment - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Hoover uh70210 cord - Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner


... Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner

Hoover 7300 suction hose wont work - Hoover U8135-900 / U8153-900 Savvy Turbo 7300 Bagless Upright Vacuum


... Hoover U8135-900 / U8153-900 Savvy Turbo 7300 Bagless Upright Vacuum

The beater bar on my hoover is not working - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Hoover u6634-900 power cord replacement - Hoover U6634-900 WindTunnel Bagless Upright Vacuum


... Hoover U6634-900 WindTunnel Bagless Upright Vacuum

Hoover windtunnel wheel spring location - Hoover U5262-900 / U5260-900 / U5266-900 / U5268-900 EmPower Bagless Upright Vacuum


Hello irishud. Go to searspartsdirect.com\015\012\015\012Enter your model number and you will get the schematics that show you exactly the wheel spring location. Joe\015\012\015\012Thanks for choosing Fixya! ... Hoover U5262-900 / U5260-900 / U5266-900 / U5268-900 EmPower Bagless Upright Vacuum

Belt replacement for Hoover U5100-9RM - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Replace main body on Hoover U8144-900 - Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum


... Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum

Hoover upright bagless vacum.motor runs, brush turns, no suction through hole behind brush roller. however there is suction going out of dust cannister filter flap to motor. what could possible problems be?


Sorry to read about your problem, I hope this helps you out.you have a clog between the brush and bagI tried to help you. Please help me and Rate/Vote on my response, thanks and good luck ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Windtunnel 721.35820500 not picking up - Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum


I had the same problem - I found the elbow behind the brush was plugged. You have to remove the floor brush, canister, and hose. Look into the pipe from the top, looking toward the floor brush. Most likely, that's where its plugged. Also check th ... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

No suction the vaccum sounds like its working and it picks up a little but it does not suction like it did 2 days ago. It is a hoover windtunnel bagless. the model number is U6600-9RM.


Have u checked all of the filters. I know that when not all the filters r clean the machine will turn on but then it will sound louder and still have no suction. Most times there is a filter under dirt container thats sits above motor and if this ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Hoover turbo power 8000 manual - Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum


... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

M084600 Dynamite Bagless Upright Vacuum: loss of suction...


A few weeks ago I ran into the same problem, virtually no suction. First I replaced the bad belt (make sure you fit it right or it'll destroy the belt, luckily I bought 2!) and while the vacuum sounded more "alive" it didn't seem to pick up anythi ... Dirt Devil M084600 Dynamite Bagless Upright Vacuum

No suction on hoover s3765-040 windtunnel bagless canister vacuum


It might need a new belt this link is for manualhttp://hoover.com/file/402/ ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

Very little suction on my Hoover Windtunnel Bagless twin chamber vaccum hose while using the tool attachments


... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0968 seconds