Having problems with your Hoover Soft Light Supreme U4262-930 Bagged Upright Vacuum ?

How to change belt on hoover soft and light supreme

\015 I need to change the belt on my sweeper and dont have the manual.. Its also not obvious. please help!\015

Answers :

Turn the machine over so you can see the bottom. If you look carefully at the plate that covers the roller, at the back behind the brush opening on either side, there is a clip that is recessed and you can push it with a flat blade screwdriver as you lift the plate up. This will allow you to take the plate off and remove the roller. Put a new belt around the roller pulley and insert the other end of the belt through the opening in the roller housing of the machine and re-install the roller. once it is installed, rotate the roller by hand to make sure that the belt is not pinched. Replace the bottom plate and rotate the roller again. The belt is running between two guards and it is possible to pinch it and damage it. This is why you rotate the roller by hand, to ensure that it is not pinched.
\015\012Now, if you look at the back wheels, on the side of the machine where the hood meets the bottom, there is a clip on either side that you can pry on gently and this will release the back portion of the hood. To release the front portion of the hood, there are similar clips located at the back corners of the bottom plate. Basically, you are prying the hood away from the base of the machine and releasing it. Now, turn the machine over, (back on it's wheels) and lift the hood off the machine. The handle of the machine should be down for this. You will see the belt where it comes through the roller housing and you will have to grab it and pull HARD and stretch it around the motor shaft. Once it is attached, rotate the belt and roller by hand to make sure that everything turns easily. Replace the hood and press the sides gently. You should hear and feel the latch/clips snap into place. If your machine has a height adjustment, there will be an adjustment knob that will have come off when the hood was removed. Replace the knob and you are done.
How and where does the wheel clip get re-installed? can't get that in properly....thanks
Repair Help & Product Troubleshooting for Hoover Soft Light Supreme U4262-930 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to change belt on hoover soft and light supreme


Turn the machine over so you can see the bottom. If you look carefully at the plate that covers the roller, at the back behind the brush opening on either side, there is a clip that is recessed and you can push it with a flat blade screwdriver as you ... Hoover Soft Light Supreme U4262-930 Bagged Upright Vacuum

How do you change the belt on a Hoover Convertible Soft & Light model U4535-930?


... Hoover Soft Light Supreme U4262-930 Bagged Upright Vacuum

Hoover upright soft and light u4266-940 had a pop sound and won't suction. how do I open to see what is wrong and change belt.


Interesting, I just fixed one of thes last Monday for a friend of mine who had the same thing happen to him.To get to see the problem is fairly simple.\015\012\015\0121) Recline the handle of the machine so the whole thing is ... Hoover Soft Light U4266-940 Bagged Upright Vacuum

How do u replace belt - Hoover Soft Light Supreme U4262-930 Bagged Upright Vacuum


Turn the machine over - locate the clamps that hold the cover on and open them. Fold the cover forward toward the front to expose the "belt alley". Lift the roller brush from its cradle. Place the new belt over the pulley on the brush and over the ... Hoover Soft Light Supreme U4262-930 Bagged Upright Vacuum

I need instructions on how to change bag in a Hoover Soft & Light Supreme upright vacuum cleaner. Thank you.


Hello,Here is a link that will show you how to change bag (and more).The model number of manual is not the same as yours but it will work for your machine. ... Hoover Soft Light Supreme U4262-930 Bagged Upright Vacuum

Hoover encore supreme soft and light need to remove roller bruch and replace belt


... Hoover Encore Supreme Energy U4293-930 Vacuum

How do i fix my hoover u4264-930 - Hoover Soft Light Supreme U4262-930 Bagged Upright Vacuum


... Hoover Soft Light Supreme U4262-930 Bagged Upright Vacuum

How to change belt on Hoover Elite supreme - Hoover U5227-930 Elite Upright Vacuum


Hello. go to http://www.hoover.com/pdfs/manuals/U6454900.pdf\015\012for step by step directions. Joe ... Hoover U5227-930 Elite Upright Vacuum

REPLACE BELT HOW DO i REPLACE THE BELT ON A HOOVER SOFT AND LIGHT U4272-930


... Vacuums

How to change a belt on a hoover elite supreme model u5035.930


... Hoover Vacuums

Hoover encore supreme belt change


... Vacuums

How do I change the bag on a hoover soft & light vacuum?


... Hoover Soft Light Supreme U4262-930 Bagged Upright Vacuum

How do i change the belt on a hoover windtunnel supreme Q12.0 series?


... Hoover Windtunnel Supreme U5280-900 Upright Vacuum

How do you install a vacuum belt for Hoover soft and lite supreme????


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=764033\015\012Generic problem for all Vacuums\015\012How do you install a\015\012Posted by winklefishxo ... Vacuums

How to change the belt? Hoover Elite Supreme.


... Hoover U5227-930 Elite Upright Vacuum

How do I change the bag on my hoover soft & light triple filtration bag?


... Vacuums

How to change a belt on a hoover elite supreme model u5035.930


... Hoover Vacuums

Need to change a belt on a hoover encore supreme upright vacuum


I'm more specialized in Kenmore vacuums, but I believe there should be 2 screws at the bottom of the vacuum. You will need to remove these 2 screws to be able to remove the bottom cover. Once the bottom cover is removed, you should be able to access ... Vacuums

How to change a belt on a hoover elite supreme model u5035.930


... Hoover Vacuums

I have a hoover light & soft upright sweeper. In replacing the belt a "v"metal clip popped out. It is metal in a shape a "v" with one hole on one side and jagged edges on the other side. Where does it go and how to re-install it????


Its actually for your height adjustment, take off head again and you will see in middle there is alittle grove that fits that piece precisely..let us know ... Hoover Soft Light Supreme U4262-930 Bagged Upright Vacuum

Cant find info on hoover soft and light model u 427-930


... Hoover Vacuums

My Miele vacuum cleaner has the red triangle light on and keeps switching on and off. Is it broken? have been hoovering upstairs and I noticed the hoover had the red triangle light on. I changed the hoover bag but it still kept going on and off. Is this an overheating problem or is the hoover on the way out?


... Miele Vacuums

My hoover turbo cyclonic needs a new belt replacement I 'am not sure how to change it please tell me how to change the belt


... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Change belt How do I change the belt in a Hoover Preferred u5095-930


... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0822 seconds