Having problems with your hoover spinscrub 50 ?

how do i fix leaking from upholstery inlet

It leaks where upholstery attachment hooke in. It does NOT leak when it is attached. Its appears there may be something missing. When i remove the connection piece it pours water.

Answers :

Repair Help & Product Troubleshooting for hoover spinscrub 50

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Leaks My Hoover Steam Vac leaks.  Where the leak is is no immediately evident, but is is more pronounced when in upholstery mode.

Check the end of the upholstery hose, it may be cracked. ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Rainbow E series AquaMate II leaks around the quick connect/disconnect how to i fix the leak??

You have to get new O rings for it. You can find them at an Auto supply store, or hardware store. If where you first go does not have them, keep looking. You will find them.\015\012\015\012If you have any more questions let me know. I am ... Rainbow E series Canister Wet/Dry Vacuum

I have a Eureka Atlantis carpet cleaner and a little water always leaks out of the bottom. Recently, the head of my handheld upholstery cleaner keeps leaking water. How do I get it to stop? Thanks.

... Eureka Atlantis 2595A Upright Wet/Dry Vacuum

The Euro-Pro Shark Steam Vacuum Blaster is leaking would like to fix myself but don't know how to get to it were it leaks

... Euro-Pro Shark Steam Blaster Vacuum

How to fix a leak in the dirt devil SE 3800 carpet cleaner? The clean water storage tank leaks.

... Dirt Devil Easy Steamer Upright Wet/Dry Vacuum

I am losing suction and it sounds as if there is a leak in the vacuum(I hear air rushing around). There is also a high pitched noise. Dyson dc07. Can there be leaks in the gaskets where you clean hoses and filter? are they replaceable. Does the noise suggest the bearings are going in the motor?Is it worth getting fixed?

It wont be a gasket problem - they don't tend to fail. \015\012\015\012A high-pitched noise can be a number of different things. That is too vague to diagnose on here with the description you have given. Can you be more specific? ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Hoover Max Extract 77 nozzle end of upholstery hose leaks drops of water

... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Dyson leaking air around bottom of cannister now what do i do to fix

... Vacuums

Water is leaking out of the upholstery cleaner

Might the button be stuck a bit? We had this problem and rinsed the brushes out and cleaned the connector area with a damp paper towel. Had to push the button in and out several times to be sure it wasn't sticking. Also, when the hose is docked fo ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

My Bissell ProHeat 2x is pouring water out of the bottom anytime it's turned on. I had it in the shop for no water, took it back again for the same problem, took it back again because it had no suction, finally took it apart and found the problem with the suction and fixed it myself. Worked fine for a day and now it is constantly leaking water, if it's turned on, and is useless for anything except for making a mess.

Took the unit apart and discovered my heater had small pinholes in the metal and they had put in silicone, instead of a gasket, which didn't seal. So much for the place I took it to "saving" my heater for me. I repaired it myself by getting a few o ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

No suction I just replaced the bag, and normally after this I have a lot of suction. Now that I have changed the bag I have less suction that I had before. Not even enough to picj up dog hair. I snaked he hose and checked all of the connections. It seems to have an air leak but no amount of tape will fix this. I cleaned the filer as well with warm water and dried it and re installed but still absolutely no suction. I am ready to throw it out! Any suggestions would be appreciated

1, Does the blower (discharge) side blow bunches of air??Yes: Something is clogged from the bag to the hose end. Try blowing out the hose from the discharge side.Or: The bag is not properly seated. Make sure that the plastic piece is ... Kenmore 23313 Whispertone Bagged Canister Vacuum

Water leaks out under the unit when using the upholstery attachment?

You may wish to check and see if the leak is where the small water supply hose is plugged in to the cleaner base. That connecction supplies water from the product, to the spray end on the upholstery hose. ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

I have a DeLonghi coffe urn Model # DCU61. It leaks terribly during the brewing cycle. I believe I broke the seal. I tried to unscrew the glass knob on the cover to clean it and discovered it didn't screw on! Please help me. I can't seem to find an appliance repair that will fix coffee urns.

HelloFirst locate where the leak is coming from,Leaks in pump coffeemakers are often due to faulty tube connectors. Unplug the coffeemaker and fill the reservoir with water. If water leaks from an elbow, clean the mating surfaces before r ... DeLonghi Vacuums

Spot Bot My spot bot leaks water when it is vacuuming up the cleaning product. Where can I get in fixed? I live in Bedford Texas,near Fort Worth. Zip 76021

Their customer service # is 1-800-237-7691 and they can tell who to call for service. You can also go to bissell.com, there is a link for service centers, just put in your zip code and a list will come up. \015\012\015\012\015\012\015\0 ... Bissell 12005 Spot Bot Handheld Vacuum

How do I fix my Rowenta Iron? It leaks from the base. It has never been dropped.

Some gasket of flat iron wear out in time. To remedy this problem you must first detect where the leak was coming from. Usually it comes from the area where the water meets the vaporizing chamber. When you found the leaking area you remove the water ... Vacuums

The upholstery tool for my Hoover Steam vac does not spray the water from the nozzle like it did when new. What is possibly wrong ? What can i do to fix it myself?

... Hoover F7431-900 SteamVac Vacuum

Hello! The suction in my Dyson animal is very poor. I discovered small holes in the internal hose, but even after a quick duct tape fix, still having issues...sounds like the seal from the canister to the vacuum is leaking air. I know I need a major repair but my mother in law is coming tonight! Any suggestions? ~Lisa

Or you can do this for free:\015\012\015\012http://www.ehow.com/how_5870417_modify-dyson-prefilter-suction.html ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Hoover turbopower 4900 bagless model U5296-900 - the canister will not seal. Dirt and air leak out where the dirtcup latch mates with the dirt cup canister. how does one fix this kind of issue?

... Hoover Vacuums

Hoover SteamVac Model F6056-900 SteamVac/SpinScrub. Indicator light and high pitch suction noise indicates that dirty water tank is full. However, water level indicator (yellow bobbing plastic thing) is at the bottom of the tank and there is no water in the tank. Have check all the hoses for clogs, none found. Checked water port from motor area to receptacle tank for clogs, none found. Fixed broken hose to upholstery wand with duck tape, (wire not broken, just cracked plastic hose). The onl

There are 2 filters, make sure they are clean, one is on the tank lid, the other is from the bottom, it is red, pull it out and clean it. If yours has a foam filter on the tank lid covering the yellow ball, make sure there is at least a 1/4 in. gap ... Hoover Vacuums

My F7458-900 leaks water when using upholstery tools I do have good suction, but water comes out fast on the bottom of machine.

This sounds like the hose connection valve is bad. The part is about $12 -15. I would take it into a qualified repair shop for repair. This type of repair is worth it. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover steam widepath 6 rotating brushes - upholstery tool does not **** up water- how to fix

... Hoover Vacuums

How do I fix Bissell Quicksteamer leaking from water tank through wheels? After I place the filled Clean/Solution tank on the Lower body of the QuickSteamer, water pours out from the body of the machine through the wheels even before I turn the power switch on. I checked the tank and there are no holes in the plastic tank.

I have the same problem... seems to be because of a bad, or worn, rubber gasket. ... Bissell Vacuums

Hoover™ SpinScrub™ SteamVac has a department for shampoo. My shampoo leaks out of the bottom and will not stay in for me to do my floors. Can this be fixed?

Check the valve at the bottom of the tank, Check for cracks around where the valev is at the bottom of the tank, if cracked, replace the tank. With the tank off, can you see the rod in the handle move up and down when you squeeze the trigger. The p ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Bissell Proheat Clearview Force carpet cleaner keeps leaking water from both tanks. What can I do to fix it?

Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 8910 ProHeat Clear View Upright Vacuum

I have a Bissell 1690 carpet cleaner and it is leaking water very quickly out the back. How can I fix this problem?

I had the same problem with my bissell proheat carpet cleaner. My cleaner would leak water out the back when i turned it on. I opened up the cleaner and found there was a broken tee connector. The tee connector was a small black plastic three way con ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0453 seconds