Having problems with your Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum ?

How to install the handle release lever

\015 I have the vacuum apart,I can't seem to get the part where it needs to be? help please!! On the base there is apiece of molded plastic that's in the way.\015

Answers :

Repair Help & Product Troubleshooting for Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The handle release lever (Part N. 38434-021) on my Hoover WindTunnel upright vacuum (uses Y bags) broke. How do I install the replacement release lever (pedal) that I purchased?


You can buy Hoover Handle Release Lever 38434-021 at \015\012http://partsreadyonline.com/item.php?ItemID=798 ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

I have a clearviewII model 3576-3 and the handle release lever is broken. How to I remove the old lever and install a new one? Thanks, Pat


... Bissell Vacuums

How to install the handle release lever


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

How to remove the hoover windtunnel handle release lever


Tilt the handle back and pry it out with a flat blade screwdriver. ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Hoover Mod U8146-900-When you press handle release lever vacuum falls down it doesnt stay up


... Hoover Vacuums

Hoover WindTunnel Self Propelled Handle Release Lever broken


... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

How do I replace the release handle lever


... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

How do I replace the handle release lever spring on a Eureka Pet Pal vacuum?


... Vacuums

Handle release lever is broken


... Hoover Tempo Widepath Upright Vacuum - Blue

Stand up lever is plastic, broke when stepped on to release handle, can it be repaired, replaced with a better one, plastic breaks too easily?


The pedal release can be replaced but the base will need to be checked for cracks as well. if the base is broken most common is the socket the pedal release snaps into. some of the plastic parts have been made with better materials ... Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum

How to replace hoover 6451 handle release lever


... Vacuums

Need to replace the handle-release lever on a Hoover model U8125-960 Vacuum cleaner


The exploded views at this URL will help you identify the part and you will be able to order it as well.\015\012\015\012http://www.ereplacementparts.com/hoover-u8125960-savy-bagged-and-bagless-vacuum-parts-c-37315_37337_37538.html ... Hoover Vacuums

VACUUM REPAIR I have a Hoover Savvy upright, windtunnel, bag/bagless vacuum (model U8150-900). The Handle Release Foot Pedal - Part #38434026 broke soon after purchase but I finally found a source to replace this item. The problem is that now that I have the repair part I cannot figure out how to remove the old pedal and install the new one. The housing appears to be one piece of solid plastic. Any ideas, PLEASE! Peter


There are 2 tabs that stick out on the release, they fit in slots, so from the top look down and you can see them, using a flatblade screwdriver that will fit in there, push the side in to release it, which isn't easy, but it can be done. When you g ... Vacuums

Foot latch is broken. need to replace with new one. how does one access to remove the foot pedal latch. By foot latch, I mean the foot lever that releases the upright to lower the handle and begin vacuuming.


It is accessed from the bottom underneath by the rear wheel. However, If there are and cracks on the pedal release socket area then the base will need replacement. parts are little cost but the unit needs to be completely disassembled. ... Hoover U6446-900 WindTunnel Bagged Upright Vacuum

Replace handle release lever part 38458042 - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Foot controlled handle release lever is broken. Where to get parts?


I had same problem - the foot release pedal would not spring into place when unit was upright (but would work if you nudged in place with your foot). I installed a replacement part, and it didn't fix the problem. I cut out a small sqare of sponge ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

How to replace the handle release lever - Hoover U6446-900 WindTunnel Bagged Upright Vacuum


... Hoover U6446-900 WindTunnel Bagged Upright Vacuum

The handle release lever won't stay up - Bissell 3522 PowerForce Bagged Upright Vacuum


... Bissell 3522 PowerForce Bagged Upright Vacuum

How to install Hoover release handle part no. 38434026.


There was a solution (from reddevil6) to a similar query on FixYa dated March 6, 2008. To quote:\015\012"There are 2 tabs that stick out on the release, they fit in slots, so from the top look down and you can see them, using a flatblade screw ... Hoover Vacuums

Bissell 9535 How do you repair the Bissell 9535 handle release lever?


I decided to just take it to a qualified repair place. ... Bissell Vacuums

How do I insall a handle release lever on a Bissel upright model 3522 vacuum cleaner


... Bissell 3522 PowerForce Bagged Upright Vacuum

Remove & replace handle release lever on hoover model U6445, s/n 039900015686


From under the vacuum, there is a tab release that you need to pry out the old part. At this point, based on your serial nuimber, your vac is over 10 years old and may also need the base. The bracket is part of the base and not expensive, but the rep ... Vacuums

How do you replace the handle release lever on the hoover windtunnel 6425-900


The release lever is held in place by tabs molded into the base. You just need use a screwdriver or two to press the plastic tabs back and then push the release lever out. The new release lever can be just pushed into place and the plastic tab ... Vacuums

Want to remove and replace detent lever or handle release pedal part # 2031044 on Bissell powerforce model # 3525. How is it done?


... Bissell Vacuums

The handle release pedal broke on my Eureka Smartvac. The spring is still in tact. I have a replacement pedal, but cannot figure out how to install it. Any suggestions?


... Eureka Smartvac 4870 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0285 seconds