Having problems with your Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum ?

The stopper has fallen out of the bucket, it just cracked and fell off. I need a new solution reservoir.

\015 Where can I get a new solution reservoir?\015

Answers :

Repair Help & Product Troubleshooting for Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The stopper has fallen out of the bucket, it just cracked and fell off. I need a new solution reservoir.


Try this link for your partshttp://www.ereplacementparts.com/solution-tank-and-cap-assembly-p-548412.html ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

My Delonghi DSS50 steam floor cleaner water reservoir has a broken valve on the bottom where it fits into the steam unit. It leaks water rather than producing steam. I would like to find the valve and replace it or buy a new water reservoir with the valve in it. I cannot find the part I need. Can you help me?


... DeLonghi DSS50 Scopa Upright Steam Vacuum

The solution stick inside the handle needs replaced and I would like a new face plate. I have the model numbers (38458-031 & 37275-011), but can not locate the replacement parts. This machine is more than 10 years old and works like brand new. I can not see throwing it out and want to fix it. Please help me locate these parts. Thank you!


... Hoover Steamvac F5860-900 Vacuum

My dirt devil quick lite has lost it's suction power. I have checked all the hoses etc for clogs or debris.I bought it in Dec 2010. I think maybe it needs a new filter. Where can I find an F44 filter or do you have any other solutions?


... Dirt Devil Easy Lite Quick Vacuum

I need a new black connector piece to extend the arm reach. Mine cracked in half.


What type of vac do you have? ... Vacuums

HELLO THERE I HAVE THE STEAM BUUGY GU-01A BUT I NEED A NEW WATER RESERVOIR CAP FOR IT IS THERE ANYWERE THAT I CAN PURCHASE ONE PLEASE AND IF SO WERE


... Tristar SB Steam Buggy Vacuum

Shutting off my vacuum has been shutting off in middle of use and i dont know why its like its over heating and i cant use it again for almost an hour is there a solution to this? or do i need to get a new vacuum?


It has a built-in temperature sensor which prevents it to be damaged from overheating. That's why it shuts down. It just needs to be opened up and cleaned thoroughly. Start with the hose if it has one and let someone who is handy with electric applia ... Vacuums

The neck on my EL7024 cracked. I bought a new neck and now realize that I must take the floor cleaner apart to get the neck switched- how do I do that? I cannot find my manual or any help on the electrolux website...help, I'm in dire need of vacuuming my house!


... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

Parts list for model: EP754 The plastic  hose connecter from hose to vac cracked i need new connector


Shark vacuums generally are not repairable - in this case, Shark doesn't sell just the part; ya gotta buy the entire power head. And it costs more than the vacuum did new.\015\012\015\012Shark's are considered throw-aways; when they break ... Euro-Pro S3325 Handheld Steam Vacuum

Model 79011 ProHeat - First the water and cleaning solution wouldn't come out without pressing the trigger several times. Now the trigger doesIs there a spring on it inside the handle or do I just need to order new trigger. I have only used the cleaner 3 times.


... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

I have a Eureka Atlantis Opti Heat model no.2596. The bottom is cracked and the clean water and shampoo leaks all out the bottom. Is there a repair part for it. I've only used it 4 or 5 times and i really need a new part.


... Eureka Atlantis 2595A Upright Wet/Dry Vacuum

My beater bar makes a noise and has a crack in the motor on the beater bar and is discolored--me thinks I need a new motor for the beater bar


Sounds like you're right. New motors are available at your nearest Aerus Electrolux store. They used to charge the same amount for selling the motor and letting the buyer install it, or for installing it in the shop. Worth checking in to.\01 ... Electrolux UltraLux 2000 Bagged Canister Vacuum

I got an new durabarnd canister with retractable cord vacuum cleaner 1 month back.One day when I was usinfg it, it just gave me a chirp sound and went off.Since then When I try to plug it in, it doest not start.I need a solution for it.Please advise


Buy a new one u tight **** we now live in a throw away world not many things these days are fixable things are exspecially designed so me throw them =away and go buy a new one ... Vacuums

I own a Eureka Optima 437 and one of the rear wheels are broken and cannot find parts for this. Where can I find parts for real wheel? I have a rear wheel that came off too. The wheel seems fine, but the plastic base that the wheel clicks onto on the underside of the vac seems to have cracked. I need a new plastic bottom. Any ideas?


Called Eureka Customer Service and ordered another part. They are mailing it to me free of charge!No more problem. ... Eureka 431A Optima Bagless Upright Vacuum

I need a small tube that runs from the water reservoir to the pump


Go to the hardware store with the old hose. They have several sizes and can cut to length for about a dollar. If you want it to last go to auto parts store and get rubber fuel hose. ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Cleaning solution isn't coming out. What are dimensions of new tubing. Is this the best answer to my problem?


Take a sample of the plastic hose to an auto parts store or hardware store. About 6' of hose should be enough. Find something more pliable (rubber), but not too fat. ... Hoover F5906-900 Upright Steam Vacuum

Hoover floormate solution canister leaks need a


We carry them at Sawtooth Vacuum. Call 12087332504. ... Hoover Floormate H3000 Upright Wet/Dry Vacuum

Need to replace motor on a Simplicity upright vacuum and need help with the wiring the new motor. New motor is different from old one.


You might not have the right motor. Take the old one with you because it should go right back in as easy it was to remove. ... Vacuums

I need a new knife for my Singer Ultralock 14U34A. It's very old but work great, just need a new cutting blade.


... Singer Vacuums

Hoover Max Extract LS F6056900 Hand Tool not working / Cleaning Solution I need to know what I need to get in order to have the hand tool work on this model. Also, what cleaning solution is best for pet stains? Tried cleaning, pre-treating with Spot Shot and towel and/or scrub brush, then cleaning, still doesn't work. PLEASE HELP!!


... Vacuums

Vacuum has new bag but won't pick up dirt. Cleaned flat filter and it made it worse. Do I need to replace rectangular filter or can I clean it. If so , how? If not, do I need to take it in for repair, ir should I get new parts? Thanks!


It's clogged somewhere. Disconnect the hoses where you can and check for obstructions. Run a coat hanger down the hose if you need to to clear the obstruction. ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Need plug for water reservoir on my floor steam cleaner


Tak the top of the system where the plug used to go to any vacumcleaner center they should stock a plug for it, or go online and resolve the problem directly with the company itself. ... Euro-Pro Shark SC-505 Handheld Steam Vacuum

Brush Roller Wondering if I need a new brush as well as a belt. The Roller seems to have trouble spinning when it makes contact with the carpet no matter how the height is set. Everything else seems to work fine. Do I need a new roller to fix this problem?


The bearings can go bad in the brushroll. It may need replaced, even if the brushes aren't worn. Helpful link....\015\012\015\012 ... Kirby G6 Bagged Upright Vacuum

My filter queen majestic was overheating,.. needs new motor insulation.


... Vacuums

I just got a new machine (new to me anyway) new home hf106 model. i need to thread the bobbin on the new thead i am using and am not sure where to put the empty bobbin and how to thread it. help!


Janome New Home? Unfortunately, Janome doesn't put the manuals for older machines on their website. Your best bet is to contact your local Janome sewing machine dealer and ask for a "copy" of the manual from them. A photo copy should b ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0581 seconds