Having problems with your Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum ?

Hoover™ SpinScrub™ SteamVac has a department for shampoo. My shampoo leaks out of the bottom and will not stay in for me to do my floors. Can this be fixed?


Answers :

Check the valve at the bottom of the tank, Check for cracks around where the valev is at the bottom of the tank, if cracked, replace the tank. With the tank off, can you see the rod in the handle move up and down when you squeeze the trigger. The part that the tank sits on is acalled a resevoir asm. it may have gone bad, or the seal is out of place.
Repair Help & Product Troubleshooting for Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hoover™ SpinScrub™ SteamVac has a department for shampoo. My shampoo leaks out of the bottom and will not stay in for me to do my floors. Can this be fixed?


Check the valve at the bottom of the tank, Check for cracks around where the valev is at the bottom of the tank, if cracked, replace the tank. With the tank off, can you see the rod in the handle move up and down when you squeeze the trigger. The p ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

I have a Steamvac WidepathLS. The plunger assembly on the bottom of the shampoo tank won't stay in. It slide up into the hole with the spring, but won't stay.


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Hoover steamvac when I use it it leaks out of bottom. when it off an water in tank leaks out of bottom,when its off an I pull the triggar it flows big time out of bottom. tank doesnt leak when off sitting with water in it


Let me start out with an apology. I did not ask my question very well - and you did not answer it as I needed.\015\012If you wish, we MAY be able to communicate in your native language. We can do most indian languages, Turkish, Ukranian and s ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover steamvac dual v w/autorinse widepath model f7245900 leaks cleaning solution on bottom of tank when filling


... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

SteamVac F5914-900 SpinScrub Upright Vacuum: Is it ok to use the hoover steamvac on tile floors...


Yes, your Steam VAc will work on tile floors. You'll want to remove the rotating brushes and install the Bare Floor Tool attachment - Hoover part number 48417003 ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Dc07 when vacuuming motor and roller part will not stay on floor , as you pull and push the vacuum the brushes keep lifting up and I have to push it down onto the floor how do I fix this?


Most dc o7 do require a little wd40 at the hinges however if problem isn't fixed try looking and making sure all the peices are snapped in like they're supposed to be. hope this helps ... Dyson DC07 Bagless Upright Cyclonic Vacuum

SteamVac F5914-900 SpinScrub won't stay upright or collect water


(1) Upright: Sounds like the tab on the lower handle that the handel release latches to has broken off. The machine is fully functional without it otherwise.\015\012\015\012(2) Assure the ring gasket is in place under the hood. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Water tank valve is leaking out of the bottom of the tank. The water leaks on the floor.


It could be a cheap fix. There should be a rubber o ring that's worn or ate away by chemicals.\015\012I'm hoping the tank isn't cracked.\015\012Remove o ring. Contact repair place. O ring shouldn't be more than 5.00. ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

When I step on the lever to place the vacuum in cleaning position, the head will not stay on the floor. Is there a spring or something to apply pressure of the head to the floor? Can I fix this?


The weight of the brush in the front should keep it on the floor. The hinge may be full of dirt and needs to be cleaned out to ensure freedom of movement. ... Bissell Prolite Multicyclonic Bagless Upright Vacuum Cleaner

Hoover Steamvac model F7425-9000: The shampoo bollte attached to the clean water reservoir became detached and now leaks shampoo prfusely. jerryhof


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

I have a hoover steamvac delux with 5 brush agitor..puts water on floor, but will not suction up. also leaks water on floor under cleaner when upright. why?


... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

I have a Eureka Atlantis Opti Heat model no.2596. The bottom is cracked and the clean water and shampoo leaks all out the bottom. Is there a repair part for it. I've only used it 4 or 5 times and i really need a new part.


... Eureka Atlantis 2595A Upright Wet/Dry Vacuum

Hoover steamvac spinbrush leaks bottom when attaching cleaning tool


... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

Dyson leaking air around bottom of cannister now what do i do to fix


... Vacuums

Hoover steamvac F5826-900 leaks from bottom wheni put tank on ple


You may need to replace the gasket.if that dont work replace the whole tank ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have an older model F6056-900 Hoover steamvac Spin Scrub Cleaner. My first problem was that I loaned it out to a friend. Anyway she ran over the hose (used for attachments) with her car. I tried using the cleaner for carpet cleaning this morning but when I tried to put the solution tank into place...its loose...won't snap back in like it used to. When I can get it somewhat in place the solution just complete drains out through the bottom fo the tank. The leak is where the small hole on the bot


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Steam vac leaks out bottom. Hoover steamvac ls f5899-100


Your problem sound like it is the valve assembly where the tank is installed. not a very expensive repair. ... Vacuums

How to fix trigger - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

How to fix hoover f5826-900 steamvac leaking water


... Hoover F5826-900 SteamVac Upright Wet Washer

My Bissell ProHeat 2x is pouring water out of the bottom anytime it's turned on. I had it in the shop for no water, took it back again for the same problem, took it back again because it had no suction, finally took it apart and found the problem with the suction and fixed it myself. Worked fine for a day and now it is constantly leaking water, if it's turned on, and is useless for anything except for making a mess.


Took the unit apart and discovered my heater had small pinholes in the metal and they had put in silicone, instead of a gasket, which didn't seal. So much for the place I took it to "saving" my heater for me. I repaired it myself by getting a few o ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Hoover SteamVac Model F6056-900 SteamVac/SpinScrub. Indicator light and high pitch suction noise indicates that dirty water tank is full. However, water level indicator (yellow bobbing plastic thing) is at the bottom of the tank and there is no water in the tank. Have check all the hoses for clogs, none found. Checked water port from motor area to receptacle tank for clogs, none found. Fixed broken hose to upholstery wand with duck tape, (wire not broken, just cracked plastic hose). The onl


There are 2 filters, make sure they are clean, one is on the tank lid, the other is from the bottom, it is red, pull it out and clean it. If yours has a foam filter on the tank lid covering the yellow ball, make sure there is at least a 1/4 in. gap ... Hoover Vacuums

Vax carpet washer deluxe leaks from bottom of water tank, somewhere between coming out of the tank and going into the jet to squirt on the floor. pissing me off - any help would be great!


Just stripped VAX rapid carpet cleaner model v-025 down found out the internal plastic water valve keeps sticking in open position causing the water to free flow on the carpet when it should be closed pop the water flow regulator part out of housing ... Vacuums

Switch from tool use, to floor? - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have a Hoover model F5876-900 SteamVac Plus 1200. The motor is making loud noises and it seem to come from the bottom of the motor itself, what can I do to fix it myself.


... Vacuums

I have the hoover steamatic spinscrub-when I put the stair cleaning attachment on it leaks onto the floor-whats up?


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0503 seconds