Having problems with your Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum ?

All terrain steam vac

\015 The steam cleaner is not dispensing any water or detergent. \302\240Brushes are moving, the supply tank and recovery tank are brand new. \302\240Something is plugged up and I don't have the manual available at this location.\015

Answers :

Try and trace the hose back from the brushes to the pump. The hose could either be disconnected, kinked, or clogged.
\015\012
\015\012Good luck - Tech101
Repair Help & Product Troubleshooting for Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hoover steam vac all terrain turbine gear assembly


Hello,\015\012\015\012I'd be happy to walk you through this repair. Unfortunately this is a very common problem with the Hoover SteamVacs. \015\012\015\012Here's what you'll need to complete this repair:\015\012- ... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

All terrain steam vac


Try and trace the hose back from the brushes to the pump. The hose could either be disconnected, kinked, or clogged.\015\012\015\012Good luck - Tech101 ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Brushes won't spin on steam vac all terrain F7452-900


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover steam-vac model #F7458-900 "All-Terrain"


Check the valves at the bottom of the tank(43513026)also check for cracks in the tank(42272104). Another thing to check is the handle asm. is a rod that pushs on the resevoir asm(tanks sits on) to make sure that it is stuck in the on pos ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

I have a new STEAM VAC Dual V All Terrain Carpet and Hardwood Cleaner. I have used it once and it worked well. Now, the second time, I have no water return. I checked the tank location, the brushes are moving slowly (but the plastic surrounding around the brushes moves as well ??) Water is coming out. There is hot air blowing out, but there is no air suction. What is wrong? Ursula Litzcke


Hello litzcke.\015\012There are lots of people facing this problem as well as other problems with this machine. As there are lots of faulty with this product; would not **** up water/air/shampoo, will not brush and lots more. If it is under war ... Vacuums

Turbine Hi I found out through your site that my turbin is bad on my steam vac and I found some information as well on how to disasemble the steam vac to get to the turbine but still was wondering if there were some more detailed instructions on how to remove the turbin. I am a sigle mom and doing the work on the steam vac myself and need a little more detailed instructions. Please help asap and have a bless day.


There are some screws on the bottom that have to come out so you can remove the top housing. Take the brush block out, there are 2 screws above where it sits. The turbine sits near the front, and in the mid section, 2 screws on the front of it and 2 ... Hoover F7220900 SteamVac V2 Upright Vacuum

Shark vac then steam steam does not work - Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple


... Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple

Shark steam and vac no steam - Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple


... Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple

Shark vac then steam is not steaming - Shark 2-in-1 Vac Then Steam Bagless Vacuum Steam Mop PLUS 8


... Shark 2-in-1 Vac Then Steam Bagless Vacuum Steam Mop PLUS 8

Shark Vac then Steam won't work as a steamer - Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple


... Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple

Parts replacement We have a Hoover Steam Vac that has a broken part #10 in your picture or Part # 37271035. Does this part cover the whole top section of the Vac? Is it hard to replace? Where can you get the best prices on Hoover parts? I have been on Hoovers website and they don't even recognize this Steam Vac. which is hard to believe they don't even recognize their own unit? Thanks Ray


This the hood or top cover. There some screws on the bottom as well as on the top, then it comes off. ... Vacuums

My vac then steam 2in1stoped steaming motor runs gets hot but no steam


... Shark Steam Vacuum, 2-in-1 Vac-then-Steam

I own a hoover steam vac model f5915-900 and i currently have two problems. 1. the brushes are spinning at a much slower speed. 2. the steam vac is not picking up the water it leaves on the carpet. Please help Josie


The reason the brushes are not spinning is because the belt is slipping, the belt is the bad that connects to the brush to a shaft that makes it spin. Next problam is it is probobly clogged. so water is not going through all the way ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

My hoover steam vac won't heat - Hoover Steam Vac Dual V w/ SpinScrub Vacuum


... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

No suction on hoover steam vac F5871-900 - Hoover Steam Vac Dual V w/ SpinScrub Vacuum


... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

I don't know how to use my hoover steam vac on carpets, hard wood floor, my (tile floor), my upholstery. I'm spraying and yet I don't see no suctions on neither of them. do you have a how to do step by step video that I can use in order to get the maximum result from my hoover steam vac.


Here is a link to the User Manual, in case that will hekp:\015\012\015\012http://www.hoover.com/pdfs/manuals/F5914900.pdf ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Vac n mop not working properly - Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple


Well, that is just a little too vague for us to help you. Try describing the problem. ... Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple

Hoover steam vac, brushes won't rotate, have cleaned filter by brushes, removed brushes and they rotate okay when off steam vac, tried to ajust level for carpet cleaning and brushes still don't move


There are three things to check when experiencing 'no spin' on the cleaning brushes. 1) Check the small pull out filter screen under the machine. It must stay clean for air to pass to the turbine which powers the brushes. 2) Check that the long shaft ... Vacuums

Hoover F6025900 Steam Vac Widepath LS, I own this steam vac and I found bits of rubber under the machine when I turned it on, smelled like burned rubber from a belt? Can you please tell me if there is a belt on this carpet cleaner and if so, how to access the belt? I have taken out some screws and still cant get to the belt? Thanks


Well there is no belt, and not sure what the rubber would be from, everything is plastic or metal. Unless it is really an electrical smell, which means the motor is going bad.\015\012\015\012 ... Hoover Vacuums

Beater brushes not turning on the wife's Hoover Steam Vac model F5905-900. Found one prior ''solution'' stating that it sounded like the belt was bad. That was my original thought, but on checking schematics and trying to find part numbers at Sears Parts Direct and at Hoover, it does not appear the F5905-900 steam vac HAS any belts to begin with. What's next??


This one I can tell you about from personal experience with that generation Hoover Steam Vac. After using it about 7 or 8 times my brushes stopped turning also.I disassembled it (kind of like disassembling a Chinese puzzle box) and found ... Hoover F5905-900 Vacuum

Hoover steam vac model f5857-900 manual - Hoover Steam Vac Carpet Cleaner Spinscrub F59149RM


... Hoover Steam Vac Carpet Cleaner Spinscrub F59149RM

I have f7226-900 hoover steam vac. when the vac


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

My Vac Then Steam vacuum works, and the steam light comes on but does not heat up and therefore does not steam. Any suggestions?


... Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple

LlllSteam vac ws working very well--shilfted to using hand vac on furniture--when I shiftead back to wanting to use the floor vacuum using the 6 brushes and the floor vac system, the r6 rotaty brushes will not turn or function. What do IO havae to do to get them to turn and function? The lever on the side ils set for carpet terrain. What do I do now to get brushed to turn and scrub as they should and did previously. James Yerges 1'630-232-2798 JMYerges&comcast.net


What is the exact model number of that unit. There are several with that name. The only things that it could be are the handle mechanism that activates the brushes or the indicator is not working nad the level that selects the brushes is not working. ... Hoover Vacuums

My shark vac then steam wont steam


Sounds like it's clogged again ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0480 seconds