Having problems with your Hoover SteamVac F5914-900 SpinScrub Upright Vacuum ?

My steam vac doesn't seem to have suction. Help?


Answers :

(1) Make sure tank lid is sealed to the tank.
\015\012(2) Is the filler panel in place on the front of the recovery tank? (Square shaped plastic panel)
\015\012(3) Is the tank gasket in place under the hood? There must be a rubber gasket on the round pipe that the recovery tank seals to when it sets down in to the cleaner foot. This connects the vacuum path to the tank.
Repair Help & Product Troubleshooting for Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Model#F5858-910 hoover steam vac,silver ,spin and scrub. It doesnt seem to spray cleaner it seems to stream it now. what could be wrong? I cant get to end of where it sprays to see if something is blocking it . otherwise it works great. I have it about 8 yrs. always worked good until recently


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

My steam-vac carpet cleaner doesnt seem to be pulling the dirty water back out of the carpet.


The most common reason for this is that the lid is not fully seated on the dirty water tank. Be sure to hook the lid in front, and then snap it in place at the rear. Another problem could be that the duct is missing from the front of the tank. ... Hoover Vacuums

My Steam Vac does not pick up the water from the carpet why? When I pull the Vac backwards to **** up the water it sucks it up sometimes and sometimes it doesn't Is there a manual I can get I seem to have misplaced mine.


Ebay,google,or the manufacturers website they usually have downloadable manuals... ... Hoover F5858-920 SteamVac Wet/Dry Vacuum

My hoover steam vac is leaking. the water seems to come out where it should by the brushes but it all leaks out even when not depressing the button. seems to be suctioning fine.


The problem you describe is a bad resevoir. I have replaced a few in this model series. Take it to an authorized dealer for repair. ... Hoover F6212-900 / F6215-900 SteamVac Agility Upright Vacuum

I have a hoover f5861-900 steam vac. the trigger mechanism seem to not work anymore. Water dribbles out without using the trigger. Taking the water tank out I can see the rod very slightly moving on the diaphragm. I removed the top part of the vac to hopefully reset the rod connection. But, didn't make any difference. I appreciate any help you can give me. thanks


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

I just purchased the hoover steam vac model F5853-900 from a garage sale and everything seems to be working well except i dont see any steam coming out from anywhere and the water in the vacuum stays cold. is there supposed to actually be a steamer inside this vacuum? if so, is there a button i need to turn on for the steamer to work? thank you so much for the help!


... Hoover F5837-900 SteamVac Supreme Wet/Dry Vacuum

My steam vac doesn't seem to have suction. Help?


(1) Make sure tank lid is sealed to the tank.\015\012(2) Is the filler panel in place on the front of the recovery tank? (Square shaped plastic panel)\015\012(3) Is the tank gasket in place under the hood? There must be a rubber gasket o ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

My hoover steam vac spin doesnt pump solution


It's probably the pump motor seized and needs oiling this video will give you instructions.. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Brushes on hoover deluxe steam vac cvarpet cleaner are not rotating. Took out the brush assy and drive spins slowly but with little torque. Cannot seem to open the bottom to see if belt or direct drive..something wrong with drive mechanism for 5 brsuhes


(1) Assure the brush shut off lever on the hood is not set to the off position. \015\012(2) Is there still a square pin standing up from the one drive brush? It should be 1/4 square, and about two inches tall. That pin is the drive from the ... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

I have a hoover steam vac f5899-100 the brushes doesnt spin...everything else works but tha. we took the brushes apart to clean


There is no belt it is air the gears stick open it up and spin them free ... Hoover F5899-910 SteamVac Vacuum

The hoover steam vac 5 brush agitator dispenses water and soap but does not show any return water to dirty water reservoir. The carpet seems damp but not soaked, still a bit troubling no waste water...what up ?


You do not have the needed vacuum on the dirty water intake. Possible causes are:\015\0121. No adapter sleeve in the back of the dirty water tank (the one that you remove to put the fabric hose adapter in)\015\0122. The dirty water top i ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

We seem to have lost our manual to our Hoover Steam Vac V Dual with rinse, Model F 7220 - 900 and were told by Hoover Rep. that we could download it from this website. How do we do that? I don't see an option for downloading manuals. Thank You, Kathy Crawford


... Hoover Vacuums

I have a Hoover Steam Vac F5853 and the trigger seems to be broken. I have taken off the cover only to find the trigger just flapping in the wind. What do I need to fix this?


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

I have used my Steam Vac for carpeting, but until today, had never tried cleaning upholstery with the spin-scrub brush. I spent a miserable afternoon trying to control the spray, which seemed to go everywhere AROUND the furniture, but not ON the furniture! Additionally, I never did get the water into the recovery tank, despite many attempts to connect and re-connect the hoses and recovery tank/lid.


I can sympathize. My vac came with two handheld attachments. I have better luck with the handheld attachment that doesn't have the spin-scrub pads. To keep the water from going all over the place, you need to keep the part the you hold only about 1 ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I can't seem to find the direction guide for my Hoover F6213-900 Steam Vac PowerMax TurboPOWER


It's on the Hoover website, I just looked it up.www.hoover.com F6213900Let me know if you need anything else. ... Hoover F6213-900 SteamVac Agility TurboPOWER Steam Vacuum Vacuum

How do I clean out the suction side of a Hoover steam-vac Model#f6020-900. I took all the screws out and still cant get it apart.I vacuum before using it, but it still seems to find more hair.


These don't come apart. Hoover makes a thin long tool that will allow you to stick up into this suction side to clean it or use a long piece of galvanized metal strip to slide up into it and clear away the hair. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

NoSuckage !!! It seems as though my hoover steam vac has stopped sucking up the water. It is still spraying the cleaner correstly though, just won't suck it back up. I've emptied it several times and it was working properly up until a few minutes ago. HELP !!! Family coming in town tommorrow !!


I had borrowed a friend's steamvac due to potty training problems with my puppy. Today it stopped sucking up the water and I completely panicked! Immediately I googled hoover f5866-900 trying to find a replacement before I had to return the vac to my ... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum

I took my hoover steam vac jr trigger apart and can't seem to remember how it goes back on?


Maybe this will help:\015\012\015\012 ... Vacuums

Steam Tek mop doesnt steam anymore


We had a similar experience. I opened the head to look if the steam line was clogged. There was no sign of dirt or calcium build up, so I opened up the body. Found that one of the heater wires had come loose. The connector, which is crimped to the wi ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Turbine Hi I found out through your site that my turbin is bad on my steam vac and I found some information as well on how to disasemble the steam vac to get to the turbine but still was wondering if there were some more detailed instructions on how to remove the turbin. I am a sigle mom and doing the work on the steam vac myself and need a little more detailed instructions. Please help asap and have a bless day.


There are some screws on the bottom that have to come out so you can remove the top housing. Take the brush block out, there are 2 screws above where it sits. The turbine sits near the front, and in the mid section, 2 screws on the front of it and 2 ... Hoover F7220900 SteamVac V2 Upright Vacuum

Leaking Solution Tank/Seal Install - Hoover Steam Vac


Not sure this will help, but we have a Hoover Steamvac F5843 and our valve seal seemed to have shrunk so the tank was leaking. Bought a new seal and had the same problem. How to install? There weren't any instructions or pictures of the part(s) invol ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Shark vac then steam steam does not work - Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple


... Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple

Shark vac then steam is not steaming - Shark 2-in-1 Vac Then Steam Bagless Vacuum Steam Mop PLUS 8


... Shark 2-in-1 Vac Then Steam Bagless Vacuum Steam Mop PLUS 8

Shark steam and vac no steam - Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple


... Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple

Shark Vac then Steam won't work as a steamer - Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple


... Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0854 seconds