Having problems with your Hoover SteamVac F5914-900 SpinScrub Upright Vacuum ?

Upholstery wand not spraying solution


Answers :

Hi:
I have the same model that had the same problem up until just minutes ago. The thing is very simple in construction. There are three screws that hold the top on (2 beneath at either side and one on top in the center, Phillips head). Carefully take the top off to expose the pump. It will be the part on the left inside the body of the machine and you're standing in front with the machine facing you. there are 2 hoses on it one carries the water from the solution tank and the other pushes the solution to the cleaning wand. In my case I removed the pump (one screw on top and a rather unique clip on the bottom of the machine. You access the clip through a square hole with a small screw driver, you put the screw driver under the tab and gently pry the locking mechanism back and the pump should release. Disconnect the tank hose (largest of the 2). Then you take out the (4) screws from the side of the pump. there is a little fan looking part in there. Mine was ceased up. I unsnapped the main pump motor housing and gently pried upward and or outward on that fan blade, the part that pushes the water to the wand until it freed itself and I was able to turn it freely with my fingers. I reassembled the machine and the thing worked fine. It's probably a good idea to rinse the machine, (wand), after each use by running some clean water through it by filling the solution tank and running it through thoroughly flushing it. Do this only as a last resort your problem may stem from something less invasive.

Hope this helps someone.
With this model you need to prime the hose while holding your hand over the suctionand pulling the trigger. One thing you may need is a new white nozzle tip. If you are mechanically inclined, this is a simple repair. You may also have a pump issue, whis may require shop replacement. cost of the pump is about $30
Repair Help & Product Troubleshooting for Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Upholstery wand not spraying solution


Hi:I have the same model that had the same problem up until just minutes ago. The thing is very simple in construction. There are three screws that hold the top on (2 beneath at either side and one on top in the center, Phillips head). Carefull ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hoover F5865-900 upholstery attachment will not spray solution


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

No spray solution out of floor or wand. Disassembled and now can't hook up hoses so it will work.


See if this helps especially page 6 and near the end there is a parts list \015\012\015\012http://www.bissell.com/images/UserGuides/9500_908.p ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Bissell spray to floor not operating. Spray to upholstery fine.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Hoover deep clean upholstery attachment won't spray


... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

Solution won't spray out of nozzle


... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

My hover extract deep cleaner won't spray water or cleaning solution


... Hoover F7431-900 SteamVac Vacuum

My steam cleaner doesn't spray the cleaning solution, instead when you pull the handle to spray it sends the solution to sides and it comes out like a small faucet


... Hoover F5835900 Upright Steam Vacuum

Bissell will spray water when set to water rinse, but as soon as it is set to light, normal, or heavy cleaning, there is no spray. I have tried priming but to no avail. I put plain water in the solution tank to test without ay success. It is like it loses it's prime whenever you try to use a solution mix. Once you set it back to water rinse only and go through the priming steps, it is OK. Any help would be appreciated. Thanks.


Please check the following with liquid in both tanks.\012 \012- Check to see if the machine will spray through the hose with the setting on tools. If it does, the pump is fine. Continue troubleshooting.\012- Check for ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have a 116.28614801 Kenmore vacuum cleaner. The Powermate connection to the wand is shorting - arcing - changed wand still happening. Any Solution?


... Kenmore Vacuums

I have a Bissell PowerSteamer 1697-1 series. It stopped spraying with the main part and now the hand tool also won't spray any solution--everything seems to be working and it appears to try but it won't spray


... Vacuums

The unit (9400-3) is not spraying water from the lower deck but will spray from the hand held wand. Checked water levels and water/soap dispenser valves which seem to be working fine. Spray nozzles are not blocked. Where do you look now.


Same problem i have got, spent one day on the bloody thing but of no use, the only solution is to spray water from bucket and use the cleaner to **** it up. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

The wand will not stand up on its own when attached to the vacuum head. I had earlier models which did not have the adjustable height and this was not a problem--I simply turned the wand to the side. But I cannot do it on with this wand. Any solutions?


Hello. There is a small part on that wand which enables it to stand up on it's own. It sounds like yours is worn or broken. Take it to your local vacuum repair store and they will have you back up and standing in no time. The part is about ten do ... Kenmore 25512/ 25513 Progressive Canister Vacuum

My Bissell ProHeat Pro-Clean upright cleaner won't spray either water or solution onto the floor, however it does spray when using the attachments on the hose. The belt is fine, I've actually tried all of the troubleshooting steps indicated in the User Manual. I'm not even certain where it is supposed to be spraying out from! Any ideas where/what to check for?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Bissell Powerease Lighweight Deep Cleaner. (Shampooer) After I fill the solution tank with the solution and water, I put it in it's slot, but all of the contents just come flowing out. I have only used this machine twice and it worked ok. You are supposed to press the trigger and the solution sprays out and then release the trigger when you want it to stop. But like I said, now I just put the tank on and all the contents come flowing out. I don't know what's wrong or how to stop it.


... Vacuums

Hoover Max Extract Dual V Carpet Washer sprayer on hose leaks and button on hose that controls spray sticks causing continuous spray. Solution?


... Vacuums

Stair and upholstery attachment


After tearing things down and inspecting the handle switch, etc., I \012found that my problem was detergent. It sets idle for a while or \012doesn't get used very much and the detergent dries and actually clogs \012the inside of the hose. I cleared ... Hoover F5881-900 Vacuum

My Bissell 8960 won't spray cleaning solution


... Vacuums

Brush doesn't agitate and solution doesn't spray. MP


... Rug Doctor 95730 MP-C2D Mighty Pro Carpet Cleaning Machine

My bissell will not spray the water and solution. I have cleaned the spray ports. I have a Bissell Proheat Cleanshot 2X. Is there a service manual available for this unit?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

My bissell 2x proheat cleaner is letting out little spray solution when on the floor cleaner setting. If I press the sprayer on the attachment solution comes out of it even when it is not set on the attachment setting what should I do to fix it


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

My Bissell powersteamer has no spray releasing for floor cleaning. The spray attachment for upholstery is working. The tank is seated properly: The belt is attached properly. I bought this machine in Sept. 2009 and used it only 2x with no problems. It did a fantastic job. Can you help with this dilemma? Mark


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Bissel proheat carpet cleaner won't spray cleaning solution . it still sucks up but won't spray out.


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

My bissell proheat cleaner is letting out little spray solution when on the floor cleaner setting. If I press the sprayer on the attachment solution comes out of it even when it is not set on the attachment setting what should I do to fix i. How do I clean the water nozzles under the machine?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Upholstery attachment The nozzle doesn't spray properly, the water just pours out (not alot) instead of spraying. It also has very low suction. The upright part seems to be working fine. I cannot figure out how to take it apart so I can look for a clog, when I look into the hose I don't see anything.


May have a problem in the noozle asm on the hose. Hose part #90001335. \015\012 \015\012 ... Hoover F5837-900 SteamVac Supreme Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0252 seconds