Having problems with your Hoover SteamVac F5914-900 SpinScrub Upright Vacuum ?
Hoover stamvac has hair trapped in it
\015 I hoover steamvac with dog hair trapped under the hood. How do I disassemble to get to the dog hair?\015
Hoover makes a neat tool for cleaning the hair and dirt out, its called a "nozzle cleanout tool". You can contact hoover and locate a store near you.
Repair Help & Product Troubleshooting for Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Hoover stamvac has hair trapped in it
Hoover makes a neat tool for cleaning the hair and dirt out, its called a "nozzle cleanout tool". You can contact hoover and locate a store near you. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
Hoover steamscrubber I loaned my vac to my daughter who used it to clean shag carpet with lots of dog hair......now the scrubbers wont spin I have taken them (scrubbers) out and cleaned the vac....don't know where the lint trap is...but i DON'T see any part moving that would make the spinners rotate either Thnks...Lydia
I had the same problem. Fixed it by taking the machine apart and lubricating the bearing inside the turo tunnell. It's a pain, but not impossible if I could do you can. You must start by taking off the cover. Don't forget the scvrews on the front by ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
Folks, My wife and I own a three-year-old Hoover U6434-900 self-propelled "Wind Tunnel" upright vacuum cleaner. The problem is that, even on the highest setting (front-end as high as possible), it gets bogged-down in even shallow pile carpet to the point that the brush stops. I've cleaned the machine thoroughly, pulling hair, thread, dental floss and such from the brush (and everywhere else), including unscrewing the brush end caps and pulling out the cat hair mats which formed in there.
Check to see if the V belt sits too deep in the brushroll groove, if it sits too deep you will need to replace the brushroll. the top of the belt should be about flush with the brushroll. also you have to take the screws out of the self propelled uni ... Vacuums
We have a new hoover bagless that is a couple months old. The pet hair attachment stopped working. I disassembled it found lots of hair wound around the various rollers and removed - painstakingly thorough i might add. Problem is the brush still wont spin and now the belt seems loose - I think I put it all back together correctly but wondering if there is a trick to this?
Without the model number, I can't look it up, but this has a 1 years warranty on it, maybe take it to a warranty shop. Just take proof of purchase, model and serial numbers. ... Vacuums
I have a Hoover U5111-900 that, every time I attempt to use it, shoots everything it should be sucking up, back out toward my feet. I have replaced the bag, pulled out lots of animal hair and such from the area behind the bag, and taken off all parts able to be removed without a screwdriver and pulled out all chunks of hair, dirt, etc. It still keeps shooting everything it should **** up out the back. Is there something I can remove to get the clog out if that's the problem? I'm scared I wil
Hello,\015\012\015\012Although I could not locate info on a U5111900, the link below shows a similiar upright and things to check for clogs. See page 12 and refer to the pages noted.\015\012\015\012 ... Vacuums
Hoover hu 4207/1 pet hair removal turbo brush wont revolve
Try Larryclare1's solution for a Kenmore and see if it helps. Worked wonders for both my turbo brush attachments. http://www.fixya.com/support/t1095798-kenmore_model_116_powermate_jr_stopped ... Vacuums
Left side of Hoover Windtunnel won't pick up dirt and hair
... Hoover U5753-900 WindTunnel Bagless Upright Vacuum
My Hoover pet cyclonic is no longer picking up pet hair
Mine did this at the bottom of the hover there should be like brisles every now and again when u hovering pickt he hair off the brisles and put in the sucken and hover and keep doing tht like every two mins when hovering ... Hoover Vacuums
My Hoover steamvac is clogged with dog hair. how
... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum
How do I clean out the suction side of a Hoover steam-vac Model#f6020-900. I took all the screws out and still cant get it apart.I vacuum before using it, but it still seems to find more hair.
These don't come apart. Hoover makes a thin long tool that will allow you to stick up into this suction side to clean it or use a long piece of galvanized metal strip to slide up into it and clear away the hair. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
How can I remove the pet hair that is trapped in the initial vacuum assembly? I don't see screws for removing the clear plastic panel
Generic comment.\015\012\015\012If the parts aren't glued in, they must be snapped in or fastened with screws. You say there are no screws - try unsnapping.\015\012\015\012I think id try a coat hanger first with the help of a ... Hoover F5870-900 SteamVac Vacuum
Does the hoover runabout u427-930 have a filter? I replaced the belt and next to the light bulb was a square gray mat that looked like a filter covering a screen full of holes that looked like the motor was behind. I think it was a mat of cat hair so I took it off and threw it away; I just want to make sure that it wasn't a filter that I need to replace.
From doing a search on the internet and hoovers website it looks as if this unit does not have a filter. Such as a hepa that needs to be replaced or that is washable. So i think you are safe and dont need to worry about it. ... Hoover Elite U5061-900 Bagged Upright Vacuum
Hoover Mach 6 U5198-900 vacuum roller brush won't turn. I had opened the bottom to clean hair off the roller. the belts are not broken. When I closed it and turned it on, now the roller brush won't turn. I can push and turn it by hand, but not easily. Then I noticed the brush on/off switch is turned off, but when I step on it, it won't turn on. I was thinking I let something get out of place when I opened the bottom, but can't see what.
... Hoover Tempo Widepath Upright Vacuum - Blue
I have a dyson dc17 animal vacuum and hair and dirt gets trapped in the top part of the vacuum. does this come apart?
You can take this apart. There is a very good detailed explanation of how to do this here: http://www.exonotes.com/content/node/4\012\012I have done it. Now it sucks like new! ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
Hoover windtunnel v2 hair keeps getting caught up in the brush pieces causing vaccumme to overheat and plastic parts to melt
This is a common problem in homes with long hair or pets. A vacuum has the nastiest job in the house. The hair will travel to ends of the brush continually and cause problems on any vac however better quality vacs have thread stops around their beari ... Hoover WindTunnel V2 U8148-900 Upright Vacuum
I have a Hoover Mach 5. The beater bar will not rotate. I have taken the plate off of the bottom and sometimes it will rotate. I put the plate back on it stops. I have taken off any hair, string or anything else that may hang up the bar itself to no avail.
Replace the belts part # 38528-034 V belt and 38528-035 flat belt also inspect the belt groove on the brushroll if the new belt rides deep in the groove you will need a new brushroll. there is a tensioner for the V belt that tightens it when the hand ... Hoover Vacuums
My filter is always full of dog hair on my animal. What is causing this. I have to clean the filter each week . Dirt seems to always be trapped in the filter also.
I have same cyclonic as you. I also have a Miele Pull-along. I use the cyclonic for fine dust after picking up the hairs with the Miele. Much quicker in the long run. Otherwise I would waste a lot of ti ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Hoover windtunnel u6476-910. Brush does not roll. Flat belt and other belt are good. The other thicker belt (called V belt?) does not have tension with the brush roll. How do I make sure it is engaged? Is there a fix? Settings are in "Carpet", "Roll-on", etc. Cleand all hair and bags/filters already.
These machines had a defective switch and a bulletin was sent out to all service depots. If you contact any Hoover Warranty Depot, they will replace the switch, wiring harness and tool receiver under a no-charge warranty. It doesn't matter how old it ... Vacuums
High pitch My Hoover fusion vacuum cleaner began making a high pitch sound that makes it very annoying to vacuum. I cleaned all the things I could clean. I even cut out all the hair that was entangled in the brushes. Any idea what is causing the sound. It sounds like an siren is going off.
The Hoover Fusion has design flaws in the motor, including a metal plate that is too thin to contain the forces acting on the motor, particularly the constant strong tension from the drive belt, and a plastic plate that is attached to the metal plate ... Hoover Fusion Plus Cyclonic Upright Vacuum Vacuum
I love my hoover F5912-900 scrubber however it has stopped sucking up the water. Is there a place that it could be blocked with dog hair or other dirt?It blows out air, but does not **** up the dirty water. How would I go about unclogging it?
Hi Shirley. Im afraid I do not have a solution for you rather I have the same problem.exactly it only blows..My machine is brand new I was using it for the 2nd time only......i also cannot find anywhere to unclog this thing....I even took the front p ... Hoover F5912-900 Upright Steam Vacuum
Hoover windtunnel vacuum roller brush doesn't turn. Have removed hair and lubed and belt looks ok. Any ideas?
Does the motor turn? if it does replace the belt. ... Hoover Vacuums
Hoover U5046 not picking up cat hair in carpet any longer - Just bought new bags - would like to get this to work
Please check the flat rubber belt from the motor shaft to the brush roll to assure it is not broken, or severely stretched. ... Hoover U5046-930 Turbopower Bagged Upright Vacuum
I have a Hoover Steam Vacuum, All Terrain, and the bristle brushes are not rotating. They appear to be seated properly and, the entire vacuum is clean and free of lint, hair etc., so everything is working properly except the brushes do not rotate. Any help would be greatly appreciated. Thank you.
I checked the owner's manual and the parts breakdown for your model F5807. Both showed that your model has a stationary brush strip and not rotating brushes. Is F5807 the correct model number? ... Hoover F5807 SteamVac Wet/Dry Vacuum
I have a Hoover linx cordless stick vac. I have not had it but several months and it has quit sucking anything up. It worked great when I first got it. I was so excited at how well it worked. It had gotten hair wrapped around the brushes but I got that out and thought it would work better. It is turning and sounds like it is working but it does not pick it up. I could use your help please. Keely
... Hoover Platinum LiNX Cordless Stick Vacuum
How do you take the brush off the front of the dyson so it can be cleaned as their is dog hairs trapped in thanks
... Dyson Ball DC24 Bagless Upright Vacuum