Having problems with your Hoover Tempo Widepath Upright Vacuum, Bagged, U5140-900 ?

Hoover u5140 900 doesnt start....its dead

\015 I bought this in May 2010, it worked every week until today.. It wouldn't start\015

Answers :

I changed the on/off switch as suggested. Vacuum is working again. Thanks
These are known for switches going bad. The new switches are much better. They get hot and stay in either the on or off position when they go bad. Remove the top cover to reveal the back of the switch. Not difficult to change. This is your part:

http://www.vacuummedic.com/product.php?id=395


Good Luck!
Vac Dr.
Repair Help & Product Troubleshooting for Hoover Tempo Widepath Upright Vacuum, Bagged, U5140-900

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hoover u5140 900 doesnt start....its dead


I changed the on/off switch as suggested. Vacuum is working again. Thanks ... Hoover Tempo Widepath Upright Vacuum, Bagged, U5140-900

I have a Swan Petmaster 1800w Hepa Filtration hoover s/r no SU3021 and cant find my instruction manuel. Problem is when on hoover it doesnt seem to be sucking anything up?? I have cleaned the cylinder and filters. Is it something to do with the bit that you can use to clear stairs/car etc and not converting back to an upright hoover again? Please help Julie


... Vacuums

My vax power 8, 2200 watts 300 air watts 4L capacity upright Hoover is brand new, I emptied out the dust/dirt collecter and cleaned the motor filter yesterday for the first time, i switched it on and all fine, the brush is spinning and the hose is sucking, put the Hoover to work it's fine for about 30 seconds then then suction stops and its dead it won't collect no more, so switched off taken apart again and the motor filter is blocked and full of dust, so I unblocked it, do the same process aga


I had the same problem. It looks like the seal on the lid on the bottom of the cylinder has fallen out when it was emptied. There is no longer a proper vacuum being created so you don't get the cyclone effect and the dirt doesn't collect where its su ... Vacuums

My brand new Hoover upright vacuum cleaner, model Hoover Tempo Widepath U5140-900 delivers no suction from the hose attachment. I have attached it exactly as illustrated in the manual. Any help is much appreciated! R. Gardner


Sometimes there is a physical switch to move the air ducts that connect to the suction motor. I'm not sure about your model, but here's what I would do. First, read the manual and instructions thoroughly, to see if there's some switch to activat ... Hoover Vacuums

Hoover Wind tunnel cyclonic is dead. Will not


... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

My hoover doesnt dispense water when i pull the lever, or soap for that matter from the bottom or the cleaning attachment!!


... Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum

Doesnt **** - Hoover U6311-930 Power Drive Bagged Upright Vacuum


Hello,If the vacuum sounds like it usually does and still doesn’t pick up, you probably need to replace the belt. To check this, turn the vacuum on and lay it down sideways. Check to see if the roller is spinning. If it's spinning, ... Hoover U6311-930 Power Drive Bagged Upright Vacuum

I just bought a Samsonite "Freeminder Flex" backpack with handle. My issue is with the lock... The combination for this lock was set to open at 0-0-0. It opened and locked perfectly at first. But after following the instruction to set up the new combination code, it doesnt lock anymore....please help and thanks! Linda


... Vacuums

Hello I need a set of rear wheels to my TurboMaster Hoover. If you provide me an Email address, I can send you the drawing + picture. Is it possible to purchase it from you. (I'm living in Israel) Best Regards Zeev Priester 24 Beit Ha'Shita st' PO Box 698 Bat-Hefer 42842 Israel Mobile: +972-(0)52-4299716 Email: [email protected] [email protected] SKYPE: zeev.priester


... Hoover Vacuums

What is the on/off switch # for Hoover Widepath model U5140-900. I cannot find it on the web.


Part # is 28161067. We have them in stock. you can call me direct 440 234-0845 or visit my website www.acevacuums.com ... Hoover Tempo Widepath Upright Vacuum - Blue

I havent owned my numatic george wet/dry hoover long but recently noticed it doesnt spray ot water anymore... why would this be? and how can i solve this?


... Numatic GVE370 Canister Wet/Dry Vacuum

I have a hoover steam vac f5899-100 the brushes doesnt spin...everything else works but tha. we took the brushes apart to clean


There is no belt it is air the gears stick open it up and spin them free ... Hoover F5899-910 SteamVac Vacuum

Hi My Hoover wind tunnel cyclonic stopped working when i was using it. I tried different plug even then it doesnt work . What to do??


If the motor stopped running, it most likely did because it was not being cooled, becuause something was stopping up the air flow. If you have cleaned the secondary filter out and it still stops while running, then remove the exhaust filter cartridg ... Dirt Devil Hoover Uh70085 Pet Cyclonic? Upright Vacuum

Brand new Hoover U5140, will not pick up anything


Yes you do need to attach the hose. That way what the brush roll picks up will go thru the hose and then into the bag. ... Hoover U6616-900 WindTunnel Bagless Upright Vacuum

Hoover windtunnel t series belt is loose- roller brush doesnt turn. Its brand new belt is slipping. we bough new belts and putthem on same problem. Can not find solutio in manual. Is the belt supposed to go around the "metal pulley". I know it goes around the little metal motor thing, then thru the guide and around the brush. What is the metal pulley??? Is is the larger round silver thing between the guide and roller?


I also have a loose belt and have bought additional belts but have the same problem. I put the it around the metal rotor and around the brush roller a shown by he Hoover video, and it is loose. ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

Hoover doesnt seem to have as much suction as it should after about a minute the motor makes a different sound


Sounds like a blockage in the machine, causing the motor to get hot.\015\012Remove all the hoses and look inside for debris, clean or replace any filters. ... Vacuums

Hoover dimension 1000 dead after hot - Vacuums


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=557355\015\012Generic problem for all Vacuums\015\012Hoover Dimension 1000 dead after\015\012Posted ... Vacuums

On the wash cycle water doesnt come out - Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

My hoover elite rewind stopped running in the middle of vacuuming. Is it dead forever?


Cord may have gone bad, if so you will have to replace the cord rewind. Could be a problem with the switch, maybe the motor. Just have to have it checked out. ... Hoover Vacuums

My hoover is broken, the hooze doesnt **** the dirt.I emptied the bag inside, there is nothing stuck in it.I think the hooze needs to be changed, where can I do it in Dublin?


You might check to see if the hose or the dirt inlet by the brush roll for a clog. Is the brush roll turning while you vacuum? If not, you may need a new belt. They stretch after awhile and turn the brush roll under load. ... Vacuums

I have Hoover Windtunnel Vac Model U5421-9RM. It is DEAD. I plugged it in and nothing is happening. Is there a reset button (and if so, where) or a fuse (if so, where)? AND what other options or trubleshooting areas should I try?


Pls call me at 1 866 416 7408\015\012thx\015\012chris ... Hoover Vacuums

Model#F5858-910 hoover steam vac,silver ,spin and scrub. It doesnt seem to spray cleaner it seems to stream it now. what could be wrong? I cant get to end of where it sprays to see if something is blocking it . otherwise it works great. I have it about 8 yrs. always worked good until recently


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

I have an old hoover turbopower approx 1986 i think its a U1102, the prob is it doesnt pick up anymore and i wondered if it had some sort of filter on it, ive cleaned all the tubes put new bag on but its still got weak suction, could you make any suggestions, thanks


Theres a tube that come up and emty's into the bag that tube is clogged.take the bag out and get a coat hanger and put a bend in it so the end is round then work it down the tube to push out the clog ... Vacuums

Hoover steamvac when I use it it leaks out of bottom. when it off an water in tank leaks out of bottom,when its off an I pull the triggar it flows big time out of bottom. tank doesnt leak when off sitting with water in it


Let me start out with an apology. I did not ask my question very well - and you did not answer it as I needed.\015\012If you wish, we MAY be able to communicate in your native language. We can do most indian languages, Turkish, Ukranian and s ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have a hoover Core vacuum. The problem is that the blue light flashes (as normal) when it is plugged in and the power is turned on and the blue light stays on (as normal) when you turn it on at the button but it makes no noise and doesnt work. All of the filters are clean. Can you help please?


... Hoover Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0706 seconds