Having problems with your Hoover Tempo Widepath Upright Vacuum - Blue ?

Hoover Tempo Widepath - propellor not working

\015 I have a Hoover Tempo Widepath Bagged Upright Vacuum whose propellers are not spinning, How do I fix it?\015

Answers :

If you are refering to the roller underneath, the belt nees to be replaced. Simply remove 4 bottom screws and then the roller, Place new belt on roller and thenon motor shaft, pull belt with the roller to install in position and install bottom plate.
Repair Help & Product Troubleshooting for Hoover Tempo Widepath Upright Vacuum - Blue

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hoover Tempo Widepath - propellor not working


If you are refering to the roller underneath, the belt nees to be replaced. Simply remove 4 bottom screws and then the roller, Place new belt on roller and thenon motor shaft, pull belt with the roller to install in position and install bottom plate. ... Hoover Tempo Widepath Upright Vacuum - Blue

Hoover tempo plus attached tools manuel - Hoover Tempo Widepath Upright Vacuum - Blue


... Hoover Tempo Widepath Upright Vacuum - Blue

Replace power cord for hoover tempo sweeper - Hoover Tempo Widepath Upright Vacuum - Blue


... Hoover Tempo Widepath Upright Vacuum - Blue

Hoover Tempo Widepath Blows Dirt Out Back on Hard Surfaces


Lots of times switching to hard surface floors you need to slow down because the air flow that does the actual picking up of the dirt can't work as fast as the spinning brush so the brush is throwing the dirt out the back before the suction can pick ... Hoover Tempo Widepath Upright Vacuum - Blue

Dirt is not going into bag on hoover tempo widepath


... Hoover Tempo Widepath Upright Vacuum - Blue

My brand new Hoover upright vacuum cleaner, model Hoover Tempo Widepath U5140-900 delivers no suction from the hose attachment. I have attached it exactly as illustrated in the manual. Any help is much appreciated! R. Gardner


Sometimes there is a physical switch to move the air ducts that connect to the suction motor. I'm not sure about your model, but here's what I would do. First, read the manual and instructions thoroughly, to see if there's some switch to activat ... Hoover Vacuums

My hoover widepath tempo does not pick up, the brush roller doesn't roll and it's harder to push


Ya, you need to replace your belt. You can get this belt here:Hoover Widepath Tempo Belt ... Hoover Tempo Widepath Upright Vacuum - Blue

After using my attachments I have a hard time getting suction when using upright again - how do I get the suction on my upright? It's a Hoover blue widepath Tempo~ thank you


It may be clogged underneath the vacuum where the roller is. Take the bottom plate off and look into the intake port. There may be some blocking the port. ... Hoover Tempo Widepath Upright Vacuum - Blue

The vacuum is not picking up at all - Hoover Tempo Widepath Upright Vacuum - Blue


If it is not picking things up -- then there is a blockage in the suction hose and /or a clogged filter.\015\012clean and clear the unit and all should be working good as new.\015\012\015\012c... ... Hoover Tempo Widepath Upright Vacuum - Blue

My hoover widepath tempo pushes easy in any hight when off, but turn in on and you can hardly push in forward. I took the beater bar off and cleaned everything and still having this problem


Make sure the beater bar is turning sometimes it will freeze up with dust and dirt will get inside the bearing caps on the end of the brush ... Vacuums

The Hoover tempo widepath (blue) vacuums great through the hose but I can't get it to vacuum through the bottom floor/carpet portion. Please help!


Clogged in the vac portion ... Hoover Tempo Widepath Upright Vacuum - Blue

What is name/model # of belt? - Hoover Tempo Widepath Upright Vacuum - Blue


The belt is flat and is a style 33 hoover or a 033. ... Hoover Tempo Widepath Upright Vacuum - Blue

Burning smell I had purchased a hoover widepath tempo vacuum two years ago and recently when I turn it on to vacuum it smells like something is burning.


The belt needs changed. its slipping. make sure its not clogged with carpet or string ect. first. if not buy a belt at walmart. in stock... ... Hoover Tempo Widepath Upright Vacuum - Blue

HOW DO YOU REPLACE THE BELT ON A HOOVER US140-900 WIDEPATH TEMPO VAC


To help you in your efforts to change your belt here are some good resources. This is the manual for your vacuum. It explains how to change the belt:\015\012\011\011\011\011\011\011 ... Hoover S1410 WindTunnel Porta Power Bagged Canister Vacuum

Im trying to replace the belt in my widepath tempo. Once I put it in the roller.... I don't see what it should attach to, to work and stay in place. ?? Please guide me.


... Hoover Vacuums

Vacuum has no suction. air is blowing out. - Hoover Tempo Widepath Upright Vacuum - Blue


... Hoover Tempo Widepath Upright Vacuum - Blue

Hoover Tempo Vacum Cleaner - 2yrs old. Just stop working. Checked all recomanded steps in manual. Looking for a location of fuse within appliance to reset.


I had a panasonic with the same issue. Turned out to be just a loose connection at the switch. ... Hoover Vacuums

Self propel feature broke on Hoover Tempo Widepath


Sounds like the tie has loosened the belt off. You may have to check under neath the sole plate by removing screws and having a look. If the belt is broken it will have to be replaced. If its not broken check that it hasn't moved within the gear asse ... Hoover Tempo Widepath Upright Vacuum - Blue

Hoover tempo It will still **** through the hose but not from the brush-bottom. Can't find a reset button. Vacuum was GREAT and is only about three weeks old. I know it still works because it has plenty of strength through hose, but won't pick up when rolled across floor. thanks! Marian


Sounds like a blockage or belt off in the foot of the vacuum. there is no reset button on this model. ... Hoover Tempo Widepath Upright Vacuum - Blue

Hoover Tempo Widepath 12 AMP, poor pick-up and suction. Fantastic suction at the attachment hose though.


Could be blockage in hose,, try straightening out the hose,,and shove a broom handle down there,,,,if there is no bend!! and clear the blockage out. ... Vacuums

Suddenly the automatic deterent mixing system in my hoover steamvac widepath (model F7443-940) stopped from working. It does not dispense detergent anymore. What could the problem be?


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=766252\015\012Generic problem for all Vacuums\015\012Suddenly the automatic detergent mixing\015\012 ... Vacuums

Hoover Widepath Tempo - belt slips off when we start it. Can you help?


Perhaps the belt is stretched. Replace it with Hoover belt # 38528-033. Remove the rug plate on the bottom ( 4 screws ), and remove the brushroll. Place the belt around the motor shaft first, then position it around the brush, and push the brush back ... Hoover Tempo Widepath Upright Vacuum - Blue

Hoover Tempo Widepath - The rollers spins, but doesn't pick up stuff off the carpet.


... Hoover Tempo Widepath Upright Vacuum - Blue

If belt is stretched do i have to replace it - Hoover Tempo Widepath Upright Vacuum - Blue


If the brush is not turning when on carpet, then yes. The beater brush will turn if the belt is touching it, so looknig at it when the brush is not hitting the carpet is not a way to see if the belt still functions. There should be a window where y ... Hoover Tempo Widepath Upright Vacuum - Blue

Replace vaccum power cord - Hoover Tempo Widepath Upright Vacuum - Blue


Watch this video for instructions ... Hoover Tempo Widepath Upright Vacuum - Blue
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0875 seconds