Having problems with your Hoover U5399-900 WindTunnel Lite Upright Vacuum ?

Missing Nuts and Bolts

\015 I'm missing the two nuts and bolts that hold the handle onto the bottom piece any body know the part numbers for them?ThanksSteve\015

Answers :

\015\012Go to www.hoover.com and use the service center locator to find your nearest dealer, these bolts and nuts are specific to each machine. they may have some just kicking around.
Repair Help & Product Troubleshooting for Hoover U5399-900 WindTunnel Lite Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Missing Nuts and Bolts

Steve, \015\012\015\012Go to www.hoover.com and use the service center locator to find your nearest dealer, these bolts and nuts are specific to each machine. they may ha ... Hoover U5399-900 WindTunnel Lite Upright Vacuum

Unable to remove round filter in bottom due to bolt not secure inside vacuum and it is just spinning so I can't remove nut holding on filter, but cannot see how to remove top of vacuum to get at other end of nut.

If you are talking about the acorn nut that secures the separator to the motor shaft, it can be removed with a small (or even a big, for that matter) air or electric impact wrench with the proper sized socket. Find a mechanic friend who has one, make ... Rainbow E series Canister Wet/Dry Vacuum

Missing two handle attach nuts .

It is under warranty, call the 800 # in your manual and they will tell you who in your area to contact. Either that take one of the bolts to a hardware store and find the right nuts for them. ... Hoover U5450-900 Windtunnel Supreme Bagged Upright Vacuum

Attatchment bolts missing to new pro heat

... Bissell 8910 ProHeat Clear View Upright Vacuum

Mine is a much older Kenmore 840 which for years has only retracted the cord part-way. I expect there is dirt in the retrieval mechanism but can't get at it. HOW do you open this type of vacuum when it seems sealed all around and there are no nuts, bolts or screws visible?

... Kenmore Vacuums

The nut on the seperator on my e series is frozen on , how do I get it off and can I use the e2 series seperator on an e series. Aparently the e series nut and seperator had to be take off more often or it freezes on...I bought a used one that's stuck and It works but I can get the seperator off to clean.

Do you have a friend who is a car or motorcycle mechanic? The acorn nut you refer to can be removed with the use of a small air impact wrench. Make sure the wrench is set to REMOVE (anti clockwise) the nut and give it a short burst. Never fails. ... Rainbow E series Canister Wet/Dry Vacuum

I have a Kirby Heritage 84. Great condition except the part that connects the innerbag is missing. I don't even know what it is called. I can open the vacuum cleaner bottom and see that the part is missing. It should be oval where it connects to the vacuum and then extend into the cloth bag. PLEASE HELP!

The Heritage 84 had two different bag assemblies available. One is a dump-out bag. The dirt simply dumps through the bottom. The other is the bagged style which has a full length zipper to open it. Inside it should contain a "bag fill tube", and a to ... Kirby Heritage II Vacuum

While I am able to delete messages from my phone, .I find it impossible to delete the accumulating missed calls. I didn't expect a computer-type phone when I purchased this one. Is there a simple way to remove the missed calls? My phone model is CL82351.

Heres the manual for your phone,, http://att.vtp-media.com/ecp/documents/product_Product/1645/UserManual/622 ... Vacuums

Hoover Wind Tunnel 7500 Brush not Turning. I have replaced the Brush and the belt. The problem does not seem to be either to me. I believe might be a missing part. The place were the belt hooks on is a metal pole which never seems to grip the belt well. In fact it seems loose most of the time and slips on the brush, causing the belt to eventually burn up. Could there be a missing plastic or rubber piece meant to hold the belt taught  on the metal pole?

Check the Idler Pulley part Number 43241004 (Item 13 in the IPB) ... Vacuums

Missing parts missing o ring around main body and need wheels

I need a new wand solution tube, Part Number 016-9463, for my Bissell Power Steamer Model number 1631. Actually, the nozzle at the end of the tube has broken, and I need to replace it, but I imagine I would have to buy the entire part, hose and nozz ... Bissell 1631 PowerSteamer ProHeat Canister Vacuum

Having cleaned my De Longhi Treviso after storage I am at a loss as to why, when the machine turns on steam escapes from the outlet. It seems as if there is something missing from the pressure vessel behind the spring. Is there anyone who has a schematic diagram where I can ascertain what, if anything has been lost/gone missing.

... DeLonghi Vacuums

I'm trying to use the reverse flow hole on my Miele s712 to blow up an air mattres. None of my fitting appear to fit so I can use the hose. Is there something I'm missing? Is there a trick of the trade? Or am i missing some gear. It's new, out of the box but I just can't get the hose onto the reverse flow. The Poduct is a Miele S712 vacuum dispite what this system has allowed me to enter. ; )


I have just receiived my "GAMUCCI MICRO V2 STARTER KIT RECHARABLE ELECTRONIC CIGARETTE" it wpould appear that there is a part missing. as I find that I cannot insert the cartridge.. the cartridge as illustrated in th manual appears to be missing. there fore i canot fir the inhaler part of the cigaret.

Panuh pu ba matatanggal ung engkanto sa bahaii?? ... Vacuums

Have a Eureka Power Plus 12.0 Amps Model 4702 Type A 120 volts and 60 HZ that there is something wrong that it isn't picking up right and you can actually feel the air coming out of it near where the bagless canister attaches. My thoughts are that a seal is missing around where the hole lines up when the cannister is locked in. This Vac was my Mom's and she passed away and I think a part went missing maybe when it was taken apart to clean the filter and empty the canister. Need to figure out if

... Vacuums

I am trying to assemble the wheel axle, and cap nuts. The cap nuts will not fit on the ends of the axle?!

... Ridgid 9 Gallon Wet/Dry Shop Vac 96882 Canister Vacuum

Belt replacement appears to have 2 belts, 1 is on and 1 is missing, the belt that is driven by the motor is missing, how do I remove the clutch housing where the belt goes?

Hi.\015\012\015\012You are correct there are 2 belts.\015\012They can be tricky to replace most shops will state they cant be replaced & you require new clutch.\015\012So try this site ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Hoover Windtunnel Bagless bolt fell off

With this self propell series, the entire bottom needs to come apart to re-install the nut. if it is one month old I would highly recommend taking it in for warranty service. What plastic is melted? ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

I can't remove nut from end of vacuum.

The nut is reverse threaded . If you hold the fan with one hand use a ratchet to loosen the nut, you will have good enough leverage to break it, but if you don't then here's a little trick....Take your vise grip pliers and clamp it to the belt end ... Vacuums

Need instructions. manual is missing.

Hi,\015\012\015\012You can download the complete instruction manual in PDF format by clicking this link ... Steam Fast SF-250 Mouse Vacuum

Wind Tunnel U5723-900 part missing?

Theres a cover that goes on the top of te dirt cup.check the filters clean if needed they are washable let dry before puttung back in.try taling the filters out and see if you have suction then.if you do then the filters are blocked up with dirt.the ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Missing guard for front of vacuum

Another person pointed me to a website that sells parts. I've emailed them for assistance and I'm hoping I will be able to find the part through them.\015\012\015\012Thank you ... Eureka 2961AVZ Bagless Upright Vacuum

Missing Part(s) for Eureka Whirlwind 4496

Go directly to eureka.com,if that don't work you can call all-type vacuum and janitorial supply.314-275-8006 ask for lisa.or go to geyser.com he might be able to get it for you ... Eureka Whirlwind 4496 Bagless Upright Cyclonic Vacuum

Need to know if i am missing a part

There is no pulley... ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

My Featherlite Dirt Devil was missing the accessories in the box.

Call tti floor care1800-321-1134 and explain it to them.they will take care of you ... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

I had to replace the switch in my Kirby G6. It took some doing but I got in out and the new one in. I must have miss labeled the wires because when I pull backwards the clutch pushes forward. Ther

Go to kirbvacuums.com and look up your model number ,they might even have a toll free number you can call ... Kirby G6 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0118 seconds