Having problems with your Hoover U5450-900 Windtunnel Supreme Bagged Upright Vacuum ?
Broken front cover
\015 Hey the cover over the bag broke, the clips snapped, where can I get a replacement part for it?\015
Go to hoover .com and look for the thing that says parts and it will ask u for a model number the model number will be on the bottom of the vacuum.
Repair Help & Product Troubleshooting for Hoover U5450-900 Windtunnel Supreme Bagged Upright Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Replace front cover on model 1676 electrolux vacuum cover broken
Broken front cover
Go to hoover .com and look for the thing that says parts and it will ask u for a model number the model number will be on the bottom of the vacuum. ... Hoover U5450-900 Windtunnel Supreme Bagged Upright Vacuum
How to dismantle twin clean powerhead to repair broken wires? the wires to the pc board have broken but can't seem to be able to remove plastic cover over wires without breaking cover.
... Electrolux Twin Clean Bagless Canister Vacuum
Suction Cover The suction cover of my Eureka Deep Steam 2575A is broken - the tabs snapped off of the cover so I am unable to screw the suction cover back on. I need to purchase a new suction cover but can't find one anywhere. Anyone know what I can do? thanks
The exact same thing happened to me. i just called and ordered it from eureka. the number is 1-800-282-2886. the cover cost 13.07 and the s ... Eureka 2576A Steam Vacuum
Dyson vacuum I have a DC07 vaccuum. The problem I am having is that the front does not want to stay down as I vaccuum and I continuously have to keep stepping on the front to make it go back down to the floor. It seems as though there is either not enough weight in the front or possibly the unit just has to be broken in so that there is not so much resistance between the handle and the front of the vaccuum. Could there be something I did not remove or is this typical on these vaccuums?
There is some thing broken it is two plastic cogs they help the front go down and stay up you will have to get a star screw driver and there should be two screws on top and two at the b ... Dyson DC07 Bagless Upright Cyclonic Vacuum
How do I install the front wheels on a kirby sentria G10D? One of the front wheels broke completely off so I ordered the front wheel shaft assy but I didn't remove the broken one so I am having difficulty with how to put the new one on.
... RTO Vacuums
My Windsor Sensor XP12 says the bag is full when it's not. I have removed the hose, brush, and filter and cleaned everything. I can put a bag on without the cover and it works great. However, when I add the bag to the front cover and close the latch the right way, it does not work. I'm thinking that the cover is not seating the bag correctly over the hole, but I can't figure out how to fix it. Any suggestions?
... Windsor SR12 Sensor Bagged Upright Vacuum
Clogs on front cover
That clear window, if you pull it out from the top, it will unhook and then you can rinse it out, if you have a flat object that you can stick in the slot, maybe you can work stuff loose and rinse them out. Then when you re-insatll it, put the 2 ho ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
Brushes stopped The brushes stopped turning while using the cleaner. I removed the brushes to see if the spindle was broken, it wasn't. I then removed the top plastic cover and checked the switch that engages the brushes; it didn't seem to be moving correctly. There's one spring on the switch - should there be two? Or do you think something has broken on the inside? Thanks for any help
Most likely the turbine is bad, it may just be clogged up, you can take it apart and clean it out real good. That may work, but it may not. Sometimes it is best to replace the turbine. ... Hoover F7431-900 SteamVac Vacuum
Kenmore Quick Clean Advanced Allegen - The plastic screws (for the cover that houses the belt and beater bar) are broken. Is there a replacement cover?
Go to Sears.com, click on parts, put in your model number, a parts list is available, also a picture diagram of it. You can purchase what you need from this site. ... Vacuums
Upright self propelled Windtunnel model: The self propulsion does not work and I can see why. I need to know how to get the top cover off the machine to get to the broken part that engages and disengages the wheels. Can you tell me how to get the cover off?
Turn the machine upside down and locate about half a dozen recessed screws which hold the bottom and the top of the machine together. ... Hoover Vacuums
250 Watt mixer. The from seal has broken down and fluid is ozzing out the front end of the mixer. Request front seal.
Hello jamesfh. Go to your local appliance store or kitchen supply store for this common part. Bring along the mixer or the seal and the brand and model of the machine. If they do not have the seal in stock they will be able to order one for you. ... Vacuums
I bought a fantom vacuum on HSN about 9 years ago.Whan it was delivered the first one was broken so they sent a second one.tThat one also was cracked on covering for brush. I called and they told me they were no longer available,so I kept that one,since it would cost me shipping to return.The back right side wheel evenually cracked and fell off.I was able to put it back on and it would stay for a few weeks or so.It now has a large piece of plastic that has broken off the wheel where the bolt fit
Kenmore Model 116 Cannister Vacuum.Trying to get into motor area. Think belt is worn out. I have removed the front two screws under the hinged cover, but can not remove cover over motor.. Still attached at rear. No evidence of any more screws to remove.
Under the cordwinder actuator button, are your other two screws. To remove this cover, take a flat tipped screwdriver and , very carefully, find the "tabs" (there are two) both on the front section under the button. Then, Carefully, press them in a ... Vacuums
Changing fan I changed the broken fan in my eureka 1934A. Put the cover back on and reattached the belt and when I went to start it, it wouldn't work. I took the cover back off to see what was going on and it looked like the motor was running in reverse of what it had been. Is this possible?
My solution is one that only works if the vacuum is a spare... To get mad at it and throw it in the garbage... \015\012\015\012My thought though on what the problem actually was... Seeing as where the vacuum came from and what the problem ... Eureka 1934 Bagged Upright Vacuum
The top front corner of the rake assembly on our Littermaid Mega box is broken off. Where and/or how can we get a replacement assembly to fix this. Because the piece is broken off, the "wheels" on that side do not like to stay in the rail and the rake doesn't work properly.
Need to clean lint out of the front cover.
I just got a heavy piece of plastic (wrapping from a windsheild wiper) and cut it about 2inches wide and 2 feet long. Then I cut a few barbs on each side. It worked great. ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Can't get the vaccum cover off to see if there is a broken belt.
IF it is a standard style vacuum, then there will normally be between 5 and 7 screws that need to be removed, the the cover can be pried off (usually by depressing 2 locking tabsI did not read theentire problem because it wasn't allowing me to ... Kenmore Vacuums
I have a Bissell Little Green Scruber Model #1720-W that has a broken clip which secures the solution/clean water tank to the front of the machine. Where can I purchase the clip to repair this machine
The side ball cover on dyson has broken off- will this cause problems while vacuuming?
... Dyson Ball DC24 Bagless Upright Vacuum
Hoover U5117-900 upright has broken brush roller cover
Http://www.hoover.com/parts/ go to this link and order what you need. ... Hoover U5117-900 Bagged Upright Vacuum
I have a Hoover Telios T5732 with broken cable winder, have purchased a replacement winder unit have loosened 5 screw but still cannot separat the covers . some advice please.
After unscrewing all the screws, try to open it evenly, not more from one side.\015\012check this link, \015\012 ... Hoover Vacuums
Need to replace impeller fan on Classic III. Half the blades are broken off. I can't figure out how to remove it. I have taken cover off.
... Kirby Vacuums
I have a Hoover Steam Vac F5853 and the trigger seems to be broken. I have taken off the cover only to find the trigger just flapping in the wind. What do I need to fix this?
... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Squeaky wheel I don't want to take apart more than I have to. The front cover has been removed and I tried using WD40 on the squeaky areas but the problem has not been resolved.
... Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow