Having problems with your Hoover U5753-900 WindTunnel Bagless Upright Vacuum ?
The belt on my hoover will not stay on. It falls
\015 The belt on my hoover will not stay on. It falls off almost as soon as I start vaccuming.\015
Okay. I would suggest that you have a problem with your roller brush. If the roller becomes clogged with hair/debris, the bearings will sieze, and sometimes even melt the plastic. the roller then has a difficult time turning and will break the belt. If the belt is slipping off, I would suggest that you either have a worn belt, the wrong belt, Or, your "windtunnel" (the half cylindrical insert the roller sets in) is missing. this insert has a "belt guide" that keeps your belt aligned. hope this helps!!!
Repair Help & Product Troubleshooting for Hoover U5753-900 WindTunnel Bagless Upright Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The belt on my hoover will not stay on. It falls
Okay. I would suggest that you have a problem with your roller brush. If the roller becomes clogged with hair/debris, the bearings will sieze, and sometimes even melt the plastic. the roller then has a difficult time turning and will break the bel ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum
Hoover Windtunnel Hello! I had to change the flat belt on my vaccum and now the belt won't stay on. I can replace it, use the vaccum, then the next time the belt comes off. Is there something I did not do right? Thanks for your help! Jennfer
Your belt may be twisted inside-out. Be sure the printed marks on the belt face away from the pulleys and shaft. The printing should face you. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Belt wont stay on Bissell cleanview bagless. Falls off within minutes after fixinging it- brand new belt. How do I fix this?
Make sure the roller turns freely with almost no resistance if not get a new roller. ... Bissell Vacuums
New main belt alignment for Hoover Windtunnel Mach 6.1. Belt moves 1/4 inch towards of vacuum cleaner and will not stay aligned on the V convex guide pulley
Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=853508\015\012Generic problem for all Vacuums\015\012New main belt alignment for\015\012Posted by donle ... Vacuums
Hoover Mod U8146-900-When you press handle release lever vacuum falls down it doesnt stay up
... Hoover Vacuums
Have ultra vision and have changed filter and foam filter, checked all hoses but still will not pick up. Belt is fine and brush is clean and spinning properly. dirt stays at top of filter instead of falling into canister.
My kids get mine stuck all the time :(Take the vacuum outside then:Remove the hose at the bottom and see if there is any obstructions. Also shake the hose to make sure there is nothing in there as well or take it out side and make s ... Dirt Devil Vacuums
Hoover Elite belt either breaks or falls off. It is the correct one.
... Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum
Belt will not stay on hoover windtunnel s3765
The Hoover Windtunnel™ Self-Propelled models have two belts, a flat belt and the V-Belt. This V-Belt is the one that drives the Brush Roller. \015\012Aft ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum
When I turn on the Hoover U5780-900 it seems the motor just starts to rev up and stays that way until I shut it off. I have replaced all the belts, made sure there were not any blockages, and checked the filters. It still does it. Any other ideas.
... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum
Hoover filter Since I cleaned the filters the dirt collects there instead of falling into the reservoir. I've tried taking apart and reassembling them, but the problem stays. I'm having to clean the filters every time I use it. Any ideas?
I have a hoover pure power 1700 vacuum cleaner and the handle will not stay upright it keeps falling back can you help please
... Hoover Vacuums
Why does the belt on my hoover UH70120 keeps falling off?
... Hoover U5753-900 WindTunnel Bagless Upright Vacuum
Hi i got got a kirby with a co signer and i left that person and cant figure out y the belt wont stay on it falls off everytime i vacuum
... Kirby Vacuums
Belt won't stay on - Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum
A belt will slip off because it is stretched, or the brush bearings are worn, or the motor drive shaft is misaligned. Hoover belts fit snug. After as little as week they begin to stretch. Even though they are not broken, they will spin lo ... Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum
I have an L shaped piece of metal with a hole at one end that fell out of my hoover elite bagged upright vaccuum cleaner. I repaired the belt but don't know where this metal piece goes. I think it has something to do with the wheel assembly which is replaced and it seems to want to stay there. any thoughts
This metal clip was for the wheel assembly, but not always needed. you can diregard the part if your vac is working correctly with the front wheels. ... Hoover Elite U5061-900 Bagged Upright Vacuum
Hoover windtunnel t series belt keeps falling off
... Hoover Vacuums
Hoover Windtunnel - the belt keeps coming off & it is the correct
One compatible belt that I use and works (at least while its new) is Royal 104425001. Try that. ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum
My bissell brush band has come off and wont stay on thus the brush will not turn, there is also a black arm type thing on a spring inside (on both sides) on the pump belt side it has broken - the side where the brush belt is, help im searching for parts and a way to fix it but im getting no joy, incidentley the brush belt thickness looks way to thick for the small thickness for the brush belt cog (?) to stay on........am i missing something? so i need to get the arm thing replaced plus find a
... Bissell ProHeat Deep Cleaner Upright Vacuum
My Mom has a Dirt Devil Featherlite and the belt falls off all the time. I put it on three times today and it falls off within a few minutes. The belt post I put it on doesn't have anything to hold the belt on. Is there supposed to be something holding the belt?
It sounds like the belt is too worn and loose to stay on. Buy a new belt specified for that model of vacuum and install. Ensure that there is only a slight amount of give in the belt when you press the middle. ... Dirt Devil CE6100 Featherlite Upright Vacuum
Have the empower upright cleaner. belt broke. can not find part #36528-040belt. can find a lot of hoover belts but not this #.Is there another hoover belt that will work on this vac?
No. if the wrong belt you will have problems. This is a common belt for Hoover, it used to be 36528027, but the number changed to the 36528040, also 40201190 is the newest number for this belt. Most repair vacuum repair shops should have this belt. ... Vacuums
New belt won't stay on
Take it in for diagnosis - seems to be an offset perpenducular drive axis.. seems to me. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Belt will not stay on
Those machines have the belts on them at production. You can read about this www.vacuummedic.com/blog/2012/10/09/my-brand-ne ... Hoover Elite Rewind Bagless Upright Vacuum - Ferrari Red Metallic
Hoover u6616-900 WindTunnel, belts come off system.
In order to seperate the hood from the agitator housing you will need to remove the screws for the bottom plate (4) remove the plate. next you will see (2) screws. one will be by the belt side the other is on the other side by the sucktion inlet. onc ... Hoover U6616-900 WindTunnel Bagless Upright Vacuum
On our Hoover U6445-900 (Mach 6.9) we replaced the small belt that goes to beater brushes in front of unit. Upon starting, the Hoover quickly got hot and smoky. We shut it off and looked things over carefully, but the second try also resulted in friction heat on the belt. Now it appears the belt may have stretched due to heat and the brushes won't spin. Any ideas?
Are you sure you purchased the right size belt..the friction you speak of is usually caused by a belt not being the right tightness or a jammed beater brush ... Hoover U6446-900 WindTunnel Bagged Upright Vacuum
Hoover Portapower hose won't stay on, when it does poor suction.
In reply to the problem you have about the hose not staying attached very well, we had this problem years ago with one of our old cylinder vacs. Sometimes after several years of the hose connector being rotated to attach/remove it from the machine, t ... Hoover Portapower C2094 Bagged Canister Vacuum