Having problems with your Hoover U5753-900 WindTunnel Bagless Upright Vacuum ?

It's not sucking up dirt - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Answers :

A couple things to check: Is there suction at the end of the hose if you unplug it from the housing. If you have vacuum to the hose, but not to the brushroll, then you may have a clog in the duct.
\015\012
\015\012Another check is if the paper bag is full, and not passing any air. It could need replaced.
Repair Help & Product Troubleshooting for Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

It's not sucking up dirt - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


A couple things to check: Is there suction at the end of the hose if you unplug it from the housing. If you have vacuum to the hose, but not to the brushroll, then you may have a clog in the duct.\015\012\015\012Another check is if the ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Belt replacement for Hoover U5100-9RM - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Hoover cord will not retract - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Our brush won,t spin can you help? - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Most likely your brush needs to be removed and cleaned. Clean all debris that might be in the bristles of the brush. You will see a holder for the brush on each end that holds it into the frame of the vacuum. The two holders should turn f ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Nano is no longer sucking up dirt... - Hoover Nano Cyclonic Compact Bagless Upright Vacuum, UH20020/W


... Hoover Nano Cyclonic Compact Bagless Upright Vacuum, UH20020/W

Runs, Smells like it is burning up - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


If it smells like burning rubber then it's possible that the belt is broken. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Vac runs for about 15 mins. then stops - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


The unit is not getting the proper airflow and the motor is overheating to shut down. \012\012You should check/clean out the filter in the dirt chamber there. If the filter is more than 1 year old, you should replace the filter. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Hose is clogged - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Hi,Here is a tip that I wrote about my Bissel but I bet you have the same problemand the hose is clogged...Bissell Bagless Upright Vacuum not work ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Brush won't turn, belts intact - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Even though the belt is intact it can still be stretched and not turn the brush. You can get replacement belts here:www.vacbelts.com ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Belt works fine but there is no suction - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


This usually indicates a clog in the hose and airflow system. It's most likely to be behind the filter in the tank or in the power head area.\015\012Detach hose from power head and look inside. If you can't see anything, try dropping a penny ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Side brush parts - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

I need to change the small belt - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Just remove the cover on the bottom of the vacuum by loosening the screws holding it on. Once they are off, you'll be able to slide out the rotating brush, and you'll see the belt there. Look inside the vacuum also, as when they break, they can sprin ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

How to clean hepa filter - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Run the HEPA filter under warm running water and allow to dry completely - preferably where it can get air from both sides of filter, do not dry in direct sunlight this can damage the filter, it is best in a warm room, can be dried in a dishdrainer i ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

I can't change belt - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=832643\015\012Generic problem for all Vacuums\015\012I can't change belt\015\012Posted by jaw53t on Jul ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Brush on underside not working, please help. - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Turn the unit over and remove the four screws that retain the bottom plate over the agitator. Remove the bottom plate and see if the belt of off or broken. The belt part number is printed on the data label for the cleaner. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Vaccume overheats and shuts down - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Check your filters. Not changing or cleaning your filters suffocates your motor, so that could be the problem.I suggest checking your local yellow pages for a local vacuum shop and have them fully inspect your vacuum for any clogs. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

How to install the torsion spring - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Hoover windtunnel hose clogged - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

I have bissell powerforce turbo bagless upright vacuum. Its a great machine. It is clogged though. I think I was not emptying the dirt collection tray thing enough. How can I unclog it. Its not sucking up like it should. It sucks up most stuff, but its not going into the bagless tray thing like it should


Remove the hose , clear that , then if you take a wire hanger apart you can pull whatever is remaining out of that connection, also remember to clean ( if you have the cleanable filter) the filter and also the top one ... Bissell Vacuums

Hoover Windtunnel model 6626 900 no suction - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Hoover vacuum alignment - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Dirt Devil Upright Bagless Vibe Vacuum no longer sucks


Sounds like there's a clog in the long hose that connects to the dirt canister. Remove the hose completely and check for clogs. There is a blue plastic piece that the hose is attached to. You can remove it by taking out the two screws in the back, ... Dirt Devil M087700SV Bagless Upright Vacuum

Hoover u6634-900 power cord replacement - Hoover U6634-900 WindTunnel Bagless Upright Vacuum


... Hoover U6634-900 WindTunnel Bagless Upright Vacuum

Hoover wind tunnel PAWS won't suck up - Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum


... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Hoover uh70210 cord - Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner


... Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1220 seconds