Having problems with your Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum ?

DOESN'T PICK UP THE DIRT - Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum


Answers :

Try changing the belt and washing the filter. check for clogs and if you belts have been on there for more than 6 months then i would change it. hope this helps
Repair Help & Product Troubleshooting for Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

DOESN'T PICK UP THE DIRT - Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum


Try changing the belt and washing the filter. check for clogs and if you belts have been on there for more than 6 months then i would change it. hope this helps ... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

Dirt cup stuck - Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum


... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

No power in my hoover uh70035b - Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum


... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

Brush doesn't move when turned on - Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum


Replace both belts part # 38523-034 the V belt and 38528-035 the flat belt. Inspect the brushroll groove for wear. the top of the V belt should almost ride flush with the brushroll when you press your handle release and bring your head back. There is ... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

How do I use the extension hose - Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum


Go here for the manual > http://hoover.com/file/493/ ... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

How to install belt - Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum


Hello,This information can be found in the user guide/manual for the unit, found here:http://www.vacuum-home.com/manuals/Hoover-U578090 ... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

Hoover U5780-900 Windtunnel Cyclonic Bagless


You probably need to change the belts. Here are the belts you need and the manual:Hoover 5780-900 Belts\015\012\01 ... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

Left side of Hoover Windtunnel won't pick up dirt and hair


... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

My self-propelled windtunnel bagless hoover does not pick up.


Remove the dirt cup.\015\012Remove the filter screwed in at the top of the dirt cup opening.\015\012Remove the hepa filters on the side of the machine.\015\012Clean all filters and re-install them. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

My hoover elite cyclonic turns on but the bagless area usually spins and holds all the dirt from the carpet. The bagless area is not spinning.


You most likely have a blockage in the suction path, or a plugged filter. ... Vacuums

Windtunnel 721.35820500 not picking up - Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum


I had the same problem - I found the elbow behind the brush was plugged. You have to remove the floor brush, canister, and hose. Look into the pipe from the top, looking toward the floor brush. Most likely, that's where its plugged. Also check th ... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

Hoover Bagless Hello,      My Hoover bag less (Model U5280-900) is not picking up dirt like it should.  The brush roll is spinning fine, but the bristles on it are only about one quarter inch long.  I am wondering how long they should be.  The vacuum is quite a few years old.  Do you think it is time to replace the brush roll.  Could you email me at [email protected] about this topic.  The product bar below did not contain my model no.  The correct model no. is above in my message.  Thanks


If the belt is more than six months old then change it even if it is not broken. then replace your filters if that doesnt work than check the hoses for a clog drop a marble down them and make sure it comes out. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Replace main body on Hoover U8144-900 - Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum


... Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum

It's not sucking up dirt - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


A couple things to check: Is there suction at the end of the hose if you unplug it from the housing. If you have vacuum to the hose, but not to the brushroll, then you may have a clog in the duct.\015\012\015\012Another check is if the ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

My hoover windtunnel + cyclonic will not pick up the dust where the brush is but the side distachment working fine


Check the belt of the brush roller. Or check for a clog ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

I have the bagless hoover windtunnel and it doesn't pick up anything and it is very hard to push. Changed the belt and The rollers are spinning and the filter has been changed. What else can I do?


It sounds like there are dirt and hair wound around the wheel axels cousing them not to spin freely. You have to remove all hair and carpet fiber. Then drop a drop of lubricant oil on the axel.\015\012Change the filter.\015\012You should ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

No longer pick ups - Hoover S3765-040 WindTunnel Bagless Canister Vacuum


You need to replace the belt. It won't pick up if the belt is worn or stretched. Here is the belt you need:Hoover S3765040 Belt ... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

My brand-new Hoover Windtunnel T-Series Pet Rewind Bagless vac simply shut off while I was using it and now I can't get it to turn back on. I've emptied the dirt collection bin and let the unit sit unplugged for 30 minutes to reset the Thermal Protector as per the manual. I've even tried a few different outlets just in case a fuse got tripped, but the vac still won't turn on. What happened? Do I need to return this vac to the store? I just bought it 5 hours ago.


... Hoover Vacuums

I am trying to find out a part number for a rubber gasket that goes on the inside of a Hoover Windtunnel Cyclonic Platinum BAgless upright. It is a very thin, light-weight gasket made of rubber that helps seal the filtering tubes. If you know where I can find a parts break down, please advise,,, JON [email protected]


Hi There,\015\012\015\012I'm not sure exactly which part you are asking about, so I went ahead and uploaded the parts schematic of your vacuum cleaner, that will diagram all the parts, and part numbers.\015\012\015\012If you n ... Hoover UH70015 Bagless Upright Cyclonic Vacuum

Need to preplace handle release pedal - Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum


To remove the old pedal, simply insert a screwdriver along it's outside edge, and pry upward to pop it out. The new pedal, (#38434026) can be pushed into place with your fingers. Install it with the handle in the upright position. ... Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum

Picks up dirt and releases it elsewhere - Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum


Don't know what you have but if its a bagged vav then the bag might be full or your intake hose at the bottom might be clogged.check the brush roller and see if there is alot of hair or carpet strands wrapped around it.if its a bagless then take all ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Replacing fuse of hoover windtunnel cyclonic bagless upright vacuum


... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

Is stopped up .won't pick up. - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


You did not say, but I assume that the vacuum is still running?\012\012Check under the machine and into the bend where it sucks up the dirt, see ig there is not something like a bit of fluff or a piece of cloth stuck in there blocking the pipe. ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

I don't have a manual. How do I clean/change the hepa filter? I have Hoover windtunnel cyclone model U5780 900l


Greetings,\015\012\015\012Please see the below Instruction manual that has instructions on how to maintain your filter. This should help you;\015\012\015\012 ... Vacuums

No suction the vaccum sounds like its working and it picks up a little but it does not suction like it did 2 days ago. It is a hoover windtunnel bagless. the model number is U6600-9RM.


Have u checked all of the filters. I know that when not all the filters r clean the machine will turn on but then it will sound louder and still have no suction. Most times there is a filter under dirt container thats sits above motor and if this ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0655 seconds