Having problems with your Hoover U6476-900 WindTunnel Vacuum ?

I am looking for a schematic for a hoover u6476900 vaccuum

Answers :

Here is a similar model77d6ad0.jpg
Repair Help & Product Troubleshooting for Hoover U6476-900 WindTunnel Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am looking for a schematic for a hoover u6476900 vaccuum

Here is a similar model ... Hoover U6476-900 WindTunnel Vacuum

Looking for schematic for F5914-950 - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

You will not find a schematic for any Hoover products. You can only get via an authoriesed dealer. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I am looking for a Hoover Steam Vac Bare Floor Attachment, Part #90001331. I found one in the US for $8.95 but by the time I paid shipping and handling it would cost $91.77, a little ridiculous. I am looking for one in Canada. Can you help. I have heard Hoover has been bought out and parts are very difficult to purchase. I bought this 1 month ago and I'm sorry I didn't know this prior to purchasing.

Hoover Bare Floor Attachment F5XXX from Usavacuum.comIt is $6.99 and shipping should cost you le ... Hoover F5906-900 Upright Steam Vacuum

I have Hoover whisper Cyclonic. I just opend beacuse it was showing Clogged. I removed all dirt etc from the belt and now roller are not moving round and the smell of burning is coming due to rubber not moving on the roller. I looked at the manual which tells me in cased on roller being Jamed if need to use the stich to reset. I looked all over could not find the switch. Can you guys help me please.

... Hoover Sh40080 Zen Whisper Bagless Multi-Cyclonic Canister Vacuum

I am looking for a Hoover U4455 manual; not available on Hoover site

They stopped producing them ... Vacuums

Using my hoover steam vac tonight and too much water coming out. once it's turned on, water and shampoo continuously come out underneath until tanks are empty. looks to be leaking from left side bottom as looking at it standing behind the unit

Make sure that you have filled everthing properly and the hoover steam is in a good condition. or check else is there any loose coonections in the bottom of the hoover, which makes the tank empty.if the problem persists take it to service. ... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

Hoover RepairGood Day. I have a hoover HWD 020. It seems that the on/off switch broke, but I don't know how to open the space ship looking lid to get to the switch. Any idea?

... Vacuums

Need a front wheel assembly for my Hoover Tempo model u5144-900. I see similar looking Hoover wheel assemblies online for different models, will they fit mine?

The Tempo series cleaners look similar, but are different colors. The wheel assemblies will work if they look identical in appearance to yours. ... Hoover U5144900 / U5146900 / U5147900 Tempo Bagged Upright Vacuum

Does the hoover runabout u427-930 have a filter? I replaced the belt and next to the light bulb was a square gray mat that looked like a filter covering a screen full of holes that looked like the motor was behind. I think it was a mat of cat hair so I took it off and threw it away; I just want to make sure that it wasn't a filter that I need to replace.

From doing a search on the internet and hoovers website it looks as if this unit does not have a filter. Such as a hepa that needs to be replaced or that is washable. So i think you are safe and dont need to worry about it. ... Hoover Elite U5061-900 Bagged Upright Vacuum

There is an "exhaust" pipe of sorts in the lower back part of the vaccuum. Most of the dust and specially pet hair just flies out of there and up in the air. It looks like more stuff comes out than stays in the vaccuum. I'm wondering if there should be something connected to that pipe? Vacuum assembled as per instructions out of the box (installing handle).

Something is wrong ... there should not be any dirt coming out as you describe ...\015\012\015\012I'm sorry, based on what you have told me ... I can't go further ... you know ... stuff link make and model.\015\012\015\012Than ... Vacuums

There is a high pitches nosie coming from my dyson. It mainly happens when the flooring type changes whilst hoovering. Everything else is ok. It sounds to me like the drive belt for the brush bar or could it be the clutch. Hoover is over 10yrs old but is in good order and well looked after, this is really the first thing that has ever gone wrong with it.

... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

Can't find info for hoover steam vac spin scrub model # F5905900 on Hoover website, doesn't show that model number at all...looking for mesh (kind of cone/cylinder shape) that goes in dirty water tank (I think) and also the tool (wand) that slides into front to clean it out. It doesn't pull all the water up very well and the filter has been missing for some time. I don't know if that has anything to do with it or not. As far as the wand tool goes, I have taken the cover off at this point and

The cleanout tool is part # 43514001. The filter is # 90001398. Be sure to leave a 1/2 inch gap between the top of the filter and the bottom of the lid. If you need a manual, try model F5914-900 0r F5912-900 on Hoover.com ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Belt type Ok, thank you for the help! I did have the top off, but did not know the taking the motor loose trick, thank you for that! Now I have a couple of more questions, and thank you so much for all of the help! I got a belt from sears, & the sales guy sold me an off brand belt. It looks just like the belt that broke, although do you have to force the motor back down into place? I think it may be the wrong belt? I have looked on the Hoover website & they do not even have parts listed fo

The belt number is 91001028. The belt will be snug but not real tight, so the belt you got may not be the right one. Most repair shops for vacuums should have this belt in stock. ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Need schematic for Hoover U4545-900. - Hoover Vacuums

... Hoover Vacuums

Need hoover floormate 3000 schematic - Hoover Vacuums

Cleaning fluid sprays out slowly and in small amounts. ... Hoover Vacuums

Schematic looking for a schematic ,vacuum isn't sucking and is going really slow

Sounds like the motor has gone bad. But you need to go to sears.com, click on the part link, put in your complete model number, usually starts with 116.************. Then a parts list will come up and if what you need is there, you can order it thr ... Kenmore 25512/ 25513 Progressive Canister Vacuum

I have brokent the hand held want feeder - pickup hose on my Hoover SteamVac, Wide Brush LS.I am looking for an appropriate hoover repair service center near Columbia, MO (Sedalia, MO ???) R. D. Heitman

Here you go, this is a authorized service center for Hoover.\015\012\015\012\011\011\011\011\011\015\012\015\012\011\011\011\011\011\011 ... Vacuums

I have a morphy richards upright hoover model 7333 and i cant get to the belt to see if it is either broken or just come off the runners, i have lost my instructions and cant get the things apart to have a look, does anyone know anything about these hoovers? many thanks, Carina.

... Hoover Vacuums

Took my vaccuum in for service recently and not sure I got my vaccuum back. Doesn't work very good and looks a little different to me. Trying to verify the serial number to compare to my records....is it the bar code number on the bottom?

The serial number for all "G" models, containing 10 digits, is located on the side of the machine above the hole the bag attaches to. ... Kirby Ultimate G Bagged Upright Vacuum

On our Hoover U6445-900 (Mach 6.9) we replaced the small belt that goes to beater brushes in front of unit. Upon starting, the Hoover quickly got hot and smoky. We shut it off and looked things over carefully, but the second try also resulted in friction heat on the belt. Now it appears the belt may have stretched due to heat and the brushes won't spin. Any ideas?

Are you sure you purchased the right size belt..the friction you speak of is usually caused by a belt not being the right tightness or a jammed beater brush ... Hoover U6446-900 WindTunnel Bagged Upright Vacuum

Overheating Hoover My Hoover cyclonic 1800w keeps overheating and turning itself off, not sure if it's the filter, I've cleaned it but it didn't look very dirty.

Most likely caused by a lack of airflow. Check to see if you have airflow at the end of the hose. If not, Remove all of the hoses and ensure that they are not clogged. If there is airflow through the hose; check the air inlet immediately aft of the b ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Beater brushes not turning on the wife's Hoover Steam Vac model F5905-900. Found one prior ''solution'' stating that it sounded like the belt was bad. That was my original thought, but on checking schematics and trying to find part numbers at Sears Parts Direct and at Hoover, it does not appear the F5905-900 steam vac HAS any belts to begin with. What's next??

This one I can tell you about from personal experience with that generation Hoover Steam Vac. After using it about 7 or 8 times my brushes stopped turning also.I disassembled it (kind of like disassembling a Chinese puzzle box) and found ... Hoover F5905-900 Vacuum

Hoover wind tunnel vaccuum cleaner i need to know

... Hoover Vacuums

Looking for a operators manual for a Hoover Steam

You might try this one since it seems like one model newer. It might be useful http://www.hoover.com/pdfs/manuals/F5871900.pdf ... Vacuums

Hoover fh50240 schematics

... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0464 seconds