Having problems with your Hoover U6616-900 WindTunnel Bagless Upright Vacuum ?

I have a hoover upright bagless - turbo power 6500 The cord has been run over and I just noticed white stuff on the cord where it is tattered. My husband said he saw it 6 months ago and never said anything! Anyway, what is that white stuff in the cord? Is it dangerous in any way? Is it insulation? What is that usually made of? Just concerned since the cord is dragged over the floor and my little boy constantly has his hands and face on the floor. Thanks. Worried mom


Answers :

It can be potentially dangerous. What you see is the cord insulation, if you move that a little you can see the power wires. They are coated and cannot hurt you if not damaged. If i were you i would wrap it in electrical tape or best thing would to get it replaced. You can replace it your self. Order the cable from Sears Parts store(link to your model)then your husband can install it. But not to sound rude if he didnt say anthing about that damaged power cord he may not be the right person for the job. He should have known it could be dangerous and thankfully your child wasn't hurt or you two either.
Here is the part number (Part# 46383334) and it will cost you about $20 plus shipping. The cord is item number 63. Let me know if you have further questions./



Repair Help & Product Troubleshooting for Hoover U6616-900 WindTunnel Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a hoover upright bagless - turbo power 6500 The cord has been run over and I just noticed white stuff on the cord where it is tattered. My husband said he saw it 6 months ago and never said anything! Anyway, what is that white stuff in the cord? Is it dangerous in any way? Is it insulation? What is that usually made of? Just concerned since the cord is dragged over the floor and my little boy constantly has his hands and face on the floor. Thanks. Worried mom


It can be potentially dangerous. What you see is the cord insulation, if you move that a little you can see the power wires. They are coated and cannot hurt you if not damaged. If i were you i would wrap it in electrical tape or best thing would to ... Hoover U6616-900 WindTunnel Bagless Upright Vacuum

Hooover upright bagless - turbo power 6500


This material is it thin strands of string like fiber? if so then it is the insulation and not a big deal however, this is still a safety issue especially with small children, you shold get some electrical tape and cover the affected area with a few ... Hoover U6616-900 WindTunnel Bagless Upright Vacuum

Noise Hi... I was doing normal house work and had been using it on carpet... I put it on floor for my hardwood floors and picked up loose clean cat litter and went to put it back on carpet and it made a horrible noise like it was rubbing. cleaned the filter... cleaned the roller thingi ...checked the belt and it is still making that horrible noise. It does not make the noise when I have it on floor but as soon as I put it on carpet it screams at me. Help! Please and thanks Linda


Hi Linda,\015\012Sounds like clutch problems, try to move the lever for carpet/floor back and forth a few times maybe it will free up. If it still makes the grinding noise, the clutch assembly will have to be replaced. Let me know, i can even ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Took my Miele Solaris canister vac in for repair as it wouldn't turn on. The repairman said to come back the next day for the estimate. I called and he said I needed a new cord reel and it would be $189. I drove to his shop and said I would wait to do it later, that I wasn't ready to spend that much. When I came home, it started right up but has no power and doesn't sound right, the noise of the motor is real soft, not as loud as before. I have this terrible feeling that when we decided not to


When you say 'has no power' do you mean , no suction? He may have left the suction hose of the motor and that's why it sounds different. I would call him back and request that he put the machine back to it's original 'state' as it was when you brough ... Vacuums

THE ELECTRICAL CORD DOES NOT REWIND COMPLETELY ... WHEN REWINDING IT LEAVES ~ 3FT OUT OF THE CANISTER ... I have cleaned the cord & made certain that the cord is not kinked or twistedc


I have the same problem but i dont know how to open it i see no screws only the rubber band that goes around it unless theres a way how to do it ... Kenmore Magic Blue 24195 Bagged Canister Vacuum

Cord problem My cord just caught on fire while I was vaccuuming the floor. I was wondering who I could get a hold of to get this fixed as soon as possible. I have the G6 mode..


Here is the contact information off of the Kirby company website. They can advise you regarding the Kirby authorized service center nearest to you. \015\012\015\012\015\012 - Contact Us By Phone\015\012United States and Canada: 1-800-494-8586 \01 ... Kirby G6 Bagged Upright Vacuum

How do I remove the collar to replace the cord to the power bar, I have the part, cannot get the little collar off to connect the new wire, purple to white and white to black... cannot get the old wir


... Hoover Powermax S3530 Bagged Canister Vacuum

My Eureka 4870 has no suction on the floor or hose setting, white air blows out the front filter. Further, the roller does not move when on the floor setting. The belt is in good condition and I cannot find any blockage in the hoses. Any ideas?


Suction problems on the Eureka 4870: after cleaning all accessible piping; cleaning the motor filter; changing the bag and replacing hepa filter the final problem was found. Removal of the motor cover revealed that the rubber gasket that fits over th ... Eureka Smartvac 4870 Bagged Upright Vacuum

Cord/recoll/turn on The miele white star vacuum will only start if I pull out the cord very fast and hard. I assume there a relation between the cord extraction and the power switch. What is it and how do i fix it? Drew


This is a tricky problem and if your are not mechanically skilled can destroy your cord reel. Basically the reel spring has collapsed inside and you need to install two washers to help push the contacts back into place. Take the entire unit apart and ... Miele S514 Solaris Bagged Canister Vacuum

Sewing machine Guru needed ;) Elna Grasshopper (new to me) circa 1950 The light works, but there was no hummm when knee pedal engaged. I have the motor out, and it is very stiff to turn. I'm at a total loss when it comes to motors and electricity. It doesn't smell burned, doesn't smell at all beyond normal machine smells. (Yes, I made detailed notes and diagrams as I took said motor out!) One other note. The long thing which my husband said might be a capacitor -- it looks like


I just purchased a fairly tidy Elna 'Grasshopper' sewing machine (1951) with the same leaking capacitor problem. I carefully removed the capacitor for examination. It is actually three capacitors in one - no chance of a direct modern replacement, but ... Vacuums

It'll **** up the stuff on the floor, but it will come back out, and I already cleared out the stuff in the vacuum


Is there a filter bag installed in the unit? If not, you will need one.If there is one, is it properly installed?Is there a tear in the filter bag?Also check that the duct from the base, to the upper bag, does not ... Bissell Vacuums

Help me with Search Tip: type in either product names or questions Search the entire site... or choose an option below Search the Web 1 Solution for "have miele solaris just had cord rewind repaired as motor would not go on. it's 4 yrs old" miele tech said "not common prob". & authorized repair said "yes-common prob,"


This is a common on some of the reviews I have read. The wires tend to break and sometimes wires get pulled from the motor itself. Problem - Vacuum doesn't go on at all.\015\012 Solution - You have some sort of electrical p ... Miele S514 Solaris Bagged Canister Vacuum

My LG saber phone's screen which i've had for 5 days now with no damage except i dropped it once, is completely white. I dropped from not a far height but it still turned the screen white with no other problems. I took it in and the lady said i would have to


... Vacuums

Miele white star vacum cleaner - electrical cord not making contact when plugged in - sometimes 'jiggling' cord at base, it will make contact and work...pls help..where can i get it repaired in nyc, or can i repair it myself


... Miele Vacuums

I have a Euro Pro Compact Performer model # EP 171 which I love. It is the best iron I have found for my quilting class. When I went to use it, I found my cats had chewed the cord to the point that it is unsafe. I took it to a repair shop to have a new cord put on it and they told me it had to go back to the factory. I do not want to purchase another iron because it is my understanding this model is no longer made and because I love it. May I send this iron back to the factory to have a new


Hi, you may already have found a solution, but I recently saw this same model iron on ebay! ... Euro-Pro Vacuums

I just bought a Dyson DC 14 All Floors Vacuum and assembled it exactly as the manual said. It sounded normal as I went over hard floors but as soon as I went on carpet, the vacuum was extremely loud. There's no strings or debris in the powerhead... what else would cause this?


There is a knob setting at the footing for carpet and bare floor can help. Otherwise check out a little plastic for suction path from the bottom to the dirt container: it may loose, just snap it in. ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Kenmore canister model 116.25513506 wont turn on. when handle switch is turned to floor. vac motor does not turn on. When switch is turned to carpet, floor nozzle works but vac motor does not. I checked fuse, all o.k. checked continuity for plug, o.k. removed wires for bag full switch...motor wont run. I wired motor directly power cord...motor runs. Thinking it must be the circuit board, how do I bypass it or test it?


... Vacuums

I live in Western Australia and was given an iROBOT Roomba 500 series for Mother's Day. Plugged base in with white cord provided. Lights showed up fo a second and then there was a popping sound and all went out. Has not worked since. Could you please tell me why and if it is the cord, where I can get another. Thankyou Coral Kaufmann. My Daughter gave to me and her name is Ruth C Bostock 63 Moondyne TrailrnGnangara Western Australia 6477


IRobot Roomba is a product looked after in Australia by Salton.\015\012Call them on 1800 427 842 orEmail: [email protected] ... Vacuums

The steam is comming off the tip of the body but the attached floor piece will not let the steam out to the floor through the pad. The body tip has turned white because of the steam pressure build up.


Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may not be getting steam to the head...Euro ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

My dyson slim vacuum doesn't switch from hose to floor mode. I thought the foot lever was broken. I realigned it but it doesn't switch now from floor mode to hose mode. I take out the hose and I can see the white part. I thought it should move as you go from upright to recline position of the handle.


The changeover valve is not activating - call the Dyson helpline - they'll set you up for a repair with a repair dealer in your area. ... Dyson Slim DC18 All Floors HEPA Bagless Upright Vacuum - Iron/Titanium/Yellow

I'm trying to replace the power cord on my Hoover Telios vacuum cleaner. I have the machine open on the floor, but can't work out how to find the terminals on the cord rewind reel - they seem


... Hoover Telios Canister Vac Vacuum

My Bissel 12 doesn't pick up stuff on my floor. I


When the vacuum is not picking up stuff like that it is a good indication usually that the belt is worn, stretched or broken. You can get the belts for this model and view the manual here: ... Bissell 3910 Bagless Upright Cyclonic Vacuum

I plugged my steam mop in and after a few seconds it made a loud pop and water went in the floor Now what


Here is a link to support to check and see if that issue is covered under warranty: h ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

I bought a Miele White Star from Craigslist. Tested it seemed fine the only thing I noticed was it made a long wining sound when turned off. Took it home used it for an hour all of the sudden it wou


... Miele Vacuums

I think the motor has gone on my dc18 all floor vac as it made afunny sound and smock started bilowing out of it


Hi Lynn,I'm sorry to hear about this. If you haven't already contacted our customer Helpline, I'd encourage you to do so - you can reach us on 0800 298 0298 (UK), or 1-866-693-9766 (US).We'll look forward to hearing from you.B ... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0480 seconds