Having problems with your Hoover U6630-900 WindTunnel Bagless Upright Vacuum ?
My HooverDeluxe Elite Rewind became extra loud
\015 My HooverDeluxe Elite Rewind became extra loud and the vacuum is vibrating so badly it is shaking my arm. The brush is spinning and the filter looks good. There are no clogs. Help!\015
If the belt is really worn it can cause that. I wold try changing the belt if you haven't recently. Here are the belts you need:
Hoover Elite Rewind Belts
Hoover Elite Rewind Belts
Repair Help & Product Troubleshooting for Hoover U6630-900 WindTunnel Bagless Upright Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My HooverDeluxe Elite Rewind became extra loud
If the belt is really worn it can cause that. I wold try changing the belt if you haven't recently. Here are the belts you need:Hoover Elite Rewi ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum
Hoover elite make very loud noise when on - Hoover Elite Rewind Bagless Upright VacuumVacuum
... Hoover Elite Rewind Bagless Upright VacuumVacuum
Loud noise coming from motor on hoover elite rewind vacuum
... Hoover U5507900 Elite Rewind Bagless Upright Vacuum
Hover Elite Rewind I've only had this vacuum a few months and I really liked it until now. There is almost no suction from anywhere in the vacuum, and I've cleaned all the filters and rollers with my shop vac and made sure that everything was assembled correctly. It used to be really quiet now it is quite loud and it keeps over heating, and shutting off. At this point I have no idea what could cause this problem, the machine is nearly brand new and I can't afford a new one at this point.
You have to clean out the hose under the bottom of the vacuum cleaner. To do this you have to remove the bottom plate the covers the brush it has about 6 screws. Also remove the brush and belt in order to thourhly clean it. I had the same issue you h ... Vacuums
Making loud noise - Hoover U5227-930 Elite Upright Vacuum
... Hoover U5227-930 Elite Upright Vacuum
Hoover Elite upright is making a very loud noise. I changed the bag, cleaned the roller and checked the belt. What else can I look at?
... Hoover Platinum Collection Upright Vacuum
Kenmore elite microwave model # 721.66463500 still works ok but has started making a strange, loud buzzing noise
My vac is really loud now is that the belt?? - Hoover Elite Rewind Bagless Upright Vacuum - Ferrari Red Metallic
Sounds like the brush roller is worn and making noise, take the complete vac to the repair shop for service. I've seen this cause damage to the front nozzle housing as well. ... Hoover Elite Rewind Bagless Upright Vacuum - Ferrari Red Metallic
I bought a roomba pro elite robotic floorvac at a tag sale from an elderly couple who apparently used this vac very little as it was very clean and she had never even used it enough to use the extra filters that came with it, she said it was just too much for her to bend down to work it or move it. i suspect she stored it but kept the battery in it. after charging it, it powers up and sings a little tune, but then shuts off. i cleaned everything, including the sensors. it still shuts off, do you
... Roomba Pro Elite Bagless Robotic Vacuum
My hoover 600 elite is really load. I took it all apart to find the motor fan is damaged with a broken off piece which must have been vacuumed up into the bag. If I replace it sith a new plastic fan will this quiet the vacuum? right now it is tremendously loud.
... Hoover Elite U5061-900 Bagged Upright Vacuum
My Hoover Elite model # UH30010 is making very loud noise like it is going to explode. I took it apart as best as I could. There was a lot of dirt by the roller. Could not see what was causing the back up or why the noise. Any suggestions?
... Hoover UH30010COM Bagged Vacuum
Kirby G4 running very loud and smells hot.
Were you put the belt on see if any thing is rubbing against shaft.it may have been the belt,replace the belt and clean out the bab and also the floor brush. ... Kirby G4 Bagged Upright Vacuum
Hoover Deluxe Elite Rewind does not pick up
Check the hose and take the bottom plate of the vacuum off to check for obstructions that you can't see right away. Use a wire coathanger (unwound) to push any clog through. I also have dogs and this vacuum. It does get clogged with fur occaisional ... Vacuums
I bought the Eureka 4703D model vacuum and my very first time powering it on, it was extremely loud - abnormally loud, and I don't know if it is loud like that because I possibly put it together wrong, or there is something wrong with it or it was previously damaged and I would like to know if this is something I can fix myself or do I have to take it back apart and return it to Walmart where I purchased it from. When it makes the loud noise, it does vacuum fine but the noise is just unbearable
... Eureka Power Plus 4703D Bagless Upright Vacuum
Hoover Vacuum Elite (Allergen Filtration) 12 Amp Motor
Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=646648\015\012Generic problem for all Vacuums\015\012Hoover Vacuum Elite (Allergen Filtration) 12 Amps...\015\012 ... Vacuums
Hoover Elite Rewind
Something's rubbing. It is probably the beater bar rubbing against the base plate. Remove the base plate and check that your beater bar is back in the sockets of the vacuum frame correctly. If they get installed a bit off, it'll make a LOT of rack ... Hoover Elite U5061-900 Bagged Upright Vacuum
Broken motor on new Hoover Elite Rewind
I only have the number for the hoover service center in Seattle, but they can certainly point you in the right direction of a service center in your area or a customer service rep.\015\012\015\012Hoover: 206-367-4425\015\012\0 ... Hoover Elite Rewind Bagless Upright VacuumVacuum
5843 All of a sudden this vacuum is extremely loud. The office I work in is VERY dusty, but that's what this vacuum is made for. Still works great, but LOUD; rattles your brain loud~ Any suggestions on what is going on or how to fix it? It's a GREAT little vaccuum!
... Eureka Whirlwind LiteSpeed 5843 Upright Vacuum
My Oreck xl makes really loud sound and starts to smell hot when running still picks up but I am afraid I will damage something if I use it. The loud sounds gets very loud then quits for a few seconds then starts again.
... Oreck XL Ultra Bagged Upright Vacuum
Loud noise?? my vacuum suddenly just got really loud. it suctions fine, i changed the belt, but when the roller is off its not loud, but when i put it back on the 11noise is horrific. it vacuums fine i just cannot stand the noise. please help
I have the exact same problem. I've taken the thing apart and cannot figure out what is causing the noise. It's not the belt and it doesn't seem to be coming from the engine. It sounds like the spinning brush is hitting something, but it's not, th ... Bissell 6590 CleanView Bagless Upright Vacuum
My eureka vacuum was fine but then suddenly got loud. We cleaned the filters and replaced the belts, but it is still loud. We have not seen any clogs in the tubing or in the vacuum. What other problems could the vacuum have to make it loud?
The noise could be coming from the Beater Bar's ball bearings. ... Vacuums
92L3-W this unit was fine when new, did a good job, after a few months it got very loud. it is so loud you need ear plugs to use it. i have checked and cleaned it. there is'nt any visible problem with it. after cleaning and changing all filters it still is very loud a lot more than when it was new.
... Bissell Vacuums
Loud rotating carpet brush noise: Just got my new Shark Navigator, but it makes a really loud noise when I turn it in the position to clean carpets. Is this normal?
... Shark Navigator Bagless Upright Vacuum
For some reason the motor has got very loud, still works but very loud.
... Bissell Momentum Bagless Upright Vacuum
I replaced the belt on my Dirt Devil Featherlite Bagless Vacuum and the brush roller rubs and makes a very loud noise when turned on. I have gone exactly by the manual instructions and made sure the belt and end caps were on correctly, but the bristles still rub the back and it makes a very loud noise. Without the brush roller in the vacuum, it sounds and runs normal. What could the problem be?
Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=561283\015\012Generic problem for all Vacuums\015\012I replaced the belt on\015\012Posted by piggyt ... Vacuums