Having problems with your Hoover U6660-900 WindTunnel Bagless Upright Vacuum ?

Problem with a WindTunnel 2 Extra Reach Bagless Upright (U8351900)

\015 I took off the spring arm thing to assist in the self-propelled belt to the brush when I was trying to replace one of the two belts. Now, I don't know how to put back right the spring arm to make the brush turn when suppose to. How am I to put it back right as if it wasn't touch by me in the first place?\015

Answers :

My dad fixed it by putting the spring under the arm lever and the roller on the outside part of the belt than in the inside as I have been trying to do.. I did however put one part of the spring in the right area of the vacuum. In a hole on the bottom area of the inside. The spring that is bent in a 90 degree angle doesn't go on top of the extend part of the arm lever but underneath. My dad did wounded the spring a bit tighter than it original is. That fixed what many days and hours of my frustration in less than 5 minutes (That's how long it approximately took my dad to fix it and in one try)
Repair Help & Product Troubleshooting for Hoover U6660-900 WindTunnel Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Problem with a WindTunnel 2 Extra Reach Bagless Upright (U8351900)


My dad fixed it by putting the spring under the arm lever and the roller on the outside part of the belt than in the inside as I have been trying to do.. I did however put one part of the spring in the right area of the vacuum. In a hole on the botto ... Hoover U6660-900 WindTunnel Bagless Upright Vacuum

Hoover Windtunnel model 6626 900 no suction - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Describe your Ball DC24 Bagless Upright Vacuum Problem NO PROBLEM JUST LOST OUR PAPER WORK ON OUR DYSONDC24


Hi there,If you're referring to the DC24 user guide, you can download a copy from our website:http://med ... Dyson Ball DC24 Bagless Upright Vacuum

Hoover windtunnel hose clogged - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Windtunnel 721.35820500 not picking up - Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum


I had the same problem - I found the elbow behind the brush was plugged. You have to remove the floor brush, canister, and hose. Look into the pipe from the top, looking toward the floor brush. Most likely, that's where its plugged. Also check th ... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

I have a windtunnel upright self-propelled that is very difficult to push, on carpet or hard floors. Seeems that it is stuck to the floor and at times you can smell the rubber from the belts. What could be the problem or problems?


Raise the front. you are trying too hard ... Vacuums

Change fan belt on dirt devil power reach - Dirt Devil M08245 Power Reach Bagless Upright Vacuum


... Dirt Devil M08245 Power Reach Bagless Upright Vacuum

Hoover Upright Bagless WindTunnel does not self propel (U6625-900). Belts are new, Brush turns strongly. Wheels propel forward very weakly and do not reverse when the handle is pulled backward. Is there a mechanical link from the self propel switch to the "transmission" ? Are there any gears that could be worn or not engaging properly?


... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

Weak suction - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


Take all hoses off and check for blockage from top to bottom. If there is not any blockage, then check the motor, sounds as if you are not getting enough power out of the motor ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

My twin chamber upright bagless windtunnel will not latch completely when i Lock it in. It leaves a gap.


... Hoover Vacuums

My dyson dc07 animal bagless upright cyclonic is giving me problems with the bottom part where it sucks up the dirt the part that covers the brushes is not going on like it suppose to what am i doing wrong


CKECK Clutch Assy and belt\015\012bottom part where it sucks \015\0121: try us WD40... \015\0122: Replaced power switch Part No : 910971-01 ... Vacuums

I have a Hoover Windtunnel Farrington upright model U6431-900 It has worked flawlessly until last week. The roller brush has stopped turning and I believe it is the belt that has broken but I am not sure how to remove the cover to inspect it and replace the belt if that is the problem. Please inform me how to perform the operation and what I should I look for? Is there a site with a diagram on how to replace said parts? Thanks for any and all helpful info that you can supply me with. Larry


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=783264\015\012Generic problem for all Vacuums\015\012I have a Hoover WindTunnel\015\012Posted by ... Vacuums

I can't change belt - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=832643\015\012Generic problem for all Vacuums\015\012I can't change belt\015\012Posted by jaw53t on Jul ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Funny smell and telescopic reach not sucking - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Almost certainly your machine has a blockage. Follow guidance in the operator manual. If you no longer have the manual, you can download a copy free from the Dyson website. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Roller brush does not turn - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


The drive belt is worn. you can get the replacement belt here:http://vacbelts.com/hoover-windtunnel-38528-035-belt.htm ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Hoover U8147-900 WindTunnel V2 Bagless Upright has sparks coming from motor housing


Most bagless uprights are exposed to dirt being drawn through their motors and filtered afterwards. As a result when you see sparks the motor has generally suffered its final breath... Today's uprights often run with high RPM disposable motors where ... Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum

The belt needs replacing - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


Here is the manual to your Hoover U6630www.thinkvacuums.com/pdf/uprights/Hoover_U6630.pdfit goes into detail on how to change the belt and which belt to purchase. Ask for a flat belt Hoover part No. 38528035 when you're going to pur ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Loss of suction in my Hoover Windtunnel bagless selfpropelled upright


There's also the possibility that the fan/impeller has stripped loose from the motor shaft and is basically sitting there while the motor turns. Also, you may have broken vanes on the fan/impeller that will drastically reduce the suction. Replacemen ... Hoover Self-Propelled WindTunnel Bagless Upright VacuumVacuum

How to clean hepa filter - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


Run the HEPA filter under warm running water and allow to dry completely - preferably where it can get air from both sides of filter, do not dry in direct sunlight this can damage the filter, it is best in a warm room, can be dried in a dishdrainer i ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

How do I change the belt on the motor? - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


Hi. This is easily done. Flip the vacuum over, beater bar up. With the machine unplugged, locate the screws or tabs that hold the base plate on, surrounding the beater bar. Remove the plate. The beater bar is held in place by fitting into socket ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

It's not sucking up dirt - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


A couple things to check: Is there suction at the end of the hose if you unplug it from the housing. If you have vacuum to the hose, but not to the brushroll, then you may have a clog in the duct.\015\012\015\012Another check is if the ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Problems with Eureka 5892AVZ Bagless Upright Cyclonic Vacuum? the cat hair seems to plug up the filter instead of goint to the canister


You may be using the wand/hose without an attachment on it. The attachments on my dyson always allow some air to flow to by, it may be the same on the Eureka. If air flow is completely stopped the cyclone will shut down and then the hair/dust/whate ... Eureka 5892AVZ Bagless Upright Cyclonic Vacuum

My Kenmore progressive vacuum is extremely loud. The airflow and suction seem to be uninhibited, but the noise is loud and frustrating. Should the filters just be cleaned or is this a sign of a different problem? It's a Kenmore Progressive Bagless Upright Vacuum 35912 and we've had it for about four years.


... Kenmore Vacuums

How to install a U8172-900 belt - Hoover U6630-900 WindTunnel Bagless Upright Vacuum


Your savvy bagless has a geared belt. remove the bottom plate and then remove the 2 back screws near the back wheels to remove the top cover also peel off the hoover decal to access the top cover screw. this will expose all components to replace the ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

VACUUM REPAIR I have a Hoover Savvy upright, windtunnel, bag/bagless vacuum (model U8150-900). The Handle Release Foot Pedal - Part #38434026 broke soon after purchase but I finally found a source to replace this item. The problem is that now that I have the repair part I cannot figure out how to remove the old pedal and install the new one. The housing appears to be one piece of solid plastic. Any ideas, PLEASE! Peter


There are 2 tabs that stick out on the release, they fit in slots, so from the top look down and you can see them, using a flatblade screwdriver that will fit in there, push the side in to release it, which isn't easy, but it can be done. When you g ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0573 seconds