Having problems with your Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum ?

Beater brush will not rotate - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


Answers :

If you have not had this unit in for any previous service, and you are tilting it back to engage the brush with the swich on carpet mode, then I would likely suspect the switch assembly in the upper handle. The new switch and harness can be replaced but you will also need the switch knob as well. Otherwise you can get the entire upper handle. This unit has a history of the lower cable wiring harness to go bad (not an easy fix).you can tell if you tilt the vac in carpet mode and wiggle the exposed cable at the bottom rear of the vac, if it starts and stops the it is bad.
Repair Help & Product Troubleshooting for Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Beater brush will not rotate - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


If you have not had this unit in for any previous service, and you are tilting it back to engage the brush with the swich on carpet mode, then I would likely suspect the switch assembly in the upper handle. The new switch and harness can be replaced ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Hoover savvy reset button for brush roller - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

How to change belt on hoover savvy vacuum - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


How do I change the smaller brush belt on a Hoover Windtunnel Cyclonic? ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Disassemble hoover savvy - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Replace belt on SAVVY - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


Here is the belt you need:Hoover Savvy Replacement Belt ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Where is the reset button on hoover savvy - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Dc 15 brush not rotating - Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum


Hi there,Your DC15's brushbar is designed to shut off if something jams it. Once you've removed any obstructions from the cleaner head and cleaned any threads or hair from around the brushbar, you should be able to reset the machine. You may ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Brush is not rotating - Dyson DC14 All floors Bagless Upright Cyclonic Vacuum


... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Rotating brush will not turn om Vax Mach Air - VAX Appliances Vax X5 Bagless Upright Cyclonic Vacuum


... VAX Appliances Vax X5 Bagless Upright Cyclonic Vacuum

The brush doesn't rotate. - Eureka 5849A Boss Bagless Upright Cyclonic Vacuum


Replace belt for the brush to work!! it may be broken or the wrong size belt. if you remove bottom part, then you can replace belt. have a good day!! ... Eureka 5849A Boss Bagless Upright Cyclonic Vacuum

The brush doesnt rotate - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Means you have return it ... ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The brush stoped rotating - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi there, \012There are a couple of reasons that the brush bar will not spin on a Dyson DC07.\012\0121. The carpet / hard floor selector is set to hard floors. \0122. There is material wound around the brush to the point th ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brush will not rotate but still has suction - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi there,Sorry to hear you're having difficulties with your DC14. Please note, the brushbar will never rotate when the cleaner is standing in the upright position, or if you have the brush control set to 'Hard floors'.However, ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brush not rotating - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Drive belt is broken . Google search for dc07 belt replacement , you will find guide to replace belt ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Roller bars on bottom not rolling - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


The belt has probably broken. Hoover says that the belt on this model should last the life of the vacuum, but that is rarely the case. They do wear and break. Changing the belt is simple and the belts aren't to much. You can get a replacement here: ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

The rotating brush is stopping - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Two things you can do. 1- Remove the brush as if you were going to change the drive belt for it. Clean the brush as best you can and spray some WD40 on the hard rubber/plastic pieces at both ends of the brush. Rotate the pieces to work the WD40 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush will not rotate - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi there, if your brush is not spinning on your dyson dc07 it will either a problem in the clutch, belts or brush roller bearings. I have made a video showing how to access all these parts it is not especially easy to do so watch the whole video to m ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My roller brush no longer rotates? - Dyson DC07 Bagless Upright Cyclonic Vacuum


DC07s have two drive ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My brush will not turn on my Bissell 6393 upright bagless vacuum... what is wrong? The belt broke and I replaced it twice... I now have 6 more replacements but the brush still won't rotate. Do I have to get a new brush?


This type of plastic brush roll fails pretty frequently. Hair and other debis gets jammed in the end caps. The hair and debris gets hot which in turn tends to melt the plastic end caps. Remove your brush roll, hold the ends with your fingers and try ... Vacuums

My DC07 Animal Bagless Upright Cyclonic Vacuum has a small attachment for vacuuming carpeted stairs. This attachment is currently not spinning its internal brush necessary to pickup the dirt on the stairs. The rest of the vaccum is working fine. The suction cap on this attachment is pulled out, as it should be. I have checked the vacuum over thoroguhly and there are no bloackages anywhere.


Make sure to extend the wand straight up and completely out of the handle and watch that you don't kink the hose. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Rotating brush is not rotating - Dirt Devil Featherlite Bagless Upright Vacuum


... Dirt Devil Featherlite Bagless Upright Vacuum

Hoover savvy brushes only work in reverse - Hoover U8171-900 / U8172-900 / U8173-900 / U8174-900 Savvy Bagless Upright Vacuum


... Hoover U8171-900 / U8172-900 / U8173-900 / U8174-900 Savvy Bagless Upright Vacuum

Bissell Power Track Cyclonic Upright Bagless Vacuum.. ..The spin brush works laying down....when upright it won't spin! I cleaned any and all hair from the roller....belt is not broken....but do I need a new belt though? The vac is a few years old bever replaced the belt yet.


You need a new belt. ... Vacuums

Brush doesn't spin. no suction felt at brush - Dyson DC14 All floors Bagless Upright Cyclonic Vacuum


Check that the brush has not become fouled with string, etc. If it still doesn't work try the following.\015\012\015\012Some Dyson's have a switch for the brush on the front of the handle. If yours does, please make sure its on. This m ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

The brush quit turning while i was vacuuming - Dyson DC07 Bagless Upright Cyclonic Vacuum


Could be some debris is caught in brush or belt broke. ... Dyson DC07 Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1527 seconds