Having problems with your Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum ?

Roller bars on bottom not rolling - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


Answers :

The belt has probably broken. Hoover says that the belt on this model should last the life of the vacuum, but that is rarely the case. They do wear and break. Changing the belt is simple and the belts aren't to much. You can get a replacement here:

Savvy Replacement Belts

Repair Help & Product Troubleshooting for Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Roller bars on bottom not rolling - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


The belt has probably broken. Hoover says that the belt on this model should last the life of the vacuum, but that is rarely the case. They do wear and break. Changing the belt is simple and the belts aren't to much. You can get a replacement here: ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

How to change belt on hoover savvy vacuum - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


How do I change the smaller brush belt on a Hoover Windtunnel Cyclonic? ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Where is the reset button on hoover savvy - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Disassemble hoover savvy - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Replace belt on SAVVY - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


Here is the belt you need:Hoover Savvy Replacement Belt ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Hoover savvy reset button for brush roller - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Beater brush will not rotate - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


If you have not had this unit in for any previous service, and you are tilting it back to engage the brush with the swich on carpet mode, then I would likely suspect the switch assembly in the upper handle. The new switch and harness can be replaced ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

The beater bar will not turn - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.Make sure that the brush control dial on the cleaner head is in the correct position for use on carpets. It should be in the centre position when in the upright mode and then when the head is released into the clea ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson beater bar won't spin - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson. \012he first check is to ensure that the brush control dial is set to the correct centre position when the machnie is locked upright. When you release the head the dial should move forward to the on position and th ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Beater bar not working. suction not working - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Check for a broken beater brush belt.\015\012Clean the beater brush, clear of all debris and add some WD40 at each end where the rubber holders are. Turn beater brush by hand to work the WD40 into the axle.\015\012Reassemble making sure the belt is ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Dyson blueprint beater bar won't turn - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


The Dyson DC 17 has a rug / floor switch on the head of the vacuum. Please check to make sure the switch is in the Rug position. If the brush roller still does not turn then you have broken the belt and need the following part.\015\012 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Bottom wheel won't turn and belt is on - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hello,When a Dyson DC07 roller brush does not spin, it can only be caused by one of two problems.The Dyson DC07 uprights use a\015\012 clutch mechanism to control the brush spinning when you change the \015\012floor / carpet s ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The beater bar is not rotating. - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


You need to replace the belt that drives the beater bar ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Better bar isnt turning on the animal - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


I would say that the belt is broken or the switch was hit and the contacts got misaligned (wife is a little rough on things). If you hit the switch on top with the vac in the use position, do you here the motor turn on? If you are not Mechanically ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Beater bar won't work - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Carpet bar doesn't turn - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


This is either a broken belt, or a faulty clutch.\015\012\015\012DC07s have two belts - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.Unfortuenately one of the belts is hidden und ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

The beater bar doesn't work - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


You need to replace the belts. Here are the belts you need:Dyson DC14 Belts ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My brush bar is not working - Dyson DC15 Animal Bagless Upright Cyclonic Vacuum


Make sure your clutch is turned on to drive - if ok, take sole plate off to see if the belt is in tact if not, needs new clutch ... Dyson DC15 Animal Bagless Upright Cyclonic Vacuum

Beater bar not spinning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


That means that the belt has stretched or broken and it needs to be replaced. Here is a link the belt you need and the manual which has instructions:Dys ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater bar not turning, making loud sound - Dyson DC07 Bagless Upright Cyclonic Vacuum


This machine has a clutch assy. that slips and makes a loud noise\015\012when something gets stuck in the roller brush. If you have nothing stuck in the roller brush chances are the clutch is worn and needs\015\012replacing. Not an easy ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The bottom part is not spinning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Your belt is off or broken. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

No suction at bottom - Dyson DC07 Bagless Upright Cyclonic Vacuum


Check for blockage in brush roll compartment,\015\012Also under the base there is a plastic transparent hose, make sure it hasn't come off, blocked or is full of holes. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

What are the bottom pieces? - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


CANT UNDERSTAND YOUR PROBLEM if you are still more specific will be a lot helpful ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The beater bar won't turn - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Replace the belt - it is broken or has a flat spot on it. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Beater bar doesn't move - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi,\012There are two things that can go worng tthat will stop the beater bar...\012The belt broke...or..\012the motor went bad...\012\012heatman101 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0983 seconds