Having problems with your Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum ?

Hoover US8174-900 Savvy Bagless

\015 I have a Hoover US8174-900 \302\240Savvy Bagless and need to know how to change the drive belt. The Manual does not tell you.\015

Answers :

It uses a cogged belt, turn it over, remove the bottom plate, remove the other screws from the bottom, turn vac back over and remove the Hoover emblem, there is a screw there to remove and the top comes off, then you can get to and replace the belt.
Repair Help & Product Troubleshooting for Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hoover US8174-900 Savvy Bagless


It uses a cogged belt, turn it over, remove the bottom plate, remove the other screws from the bottom, turn vac back over and remove the Hoover emblem, there is a screw there to remove and the top comes off, then you can get to and replace the belt. ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Disassemble hoover savvy - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

How to change belt on hoover savvy vacuum - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


How do I change the smaller brush belt on a Hoover Windtunnel Cyclonic? ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Hoover savvy reset button for brush roller - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Where is the reset button on hoover savvy - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Hoover savvy brushes only work in reverse - Hoover U8171-900 / U8172-900 / U8173-900 / U8174-900 Savvy Bagless Upright Vacuum


... Hoover U8171-900 / U8172-900 / U8173-900 / U8174-900 Savvy Bagless Upright Vacuum

Hoover 7300 suction hose wont work - Hoover U8135-900 / U8153-900 Savvy Turbo 7300 Bagless Upright Vacuum


... Hoover U8135-900 / U8153-900 Savvy Turbo 7300 Bagless Upright Vacuum

Replace belt on SAVVY - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


Here is the belt you need:Hoover Savvy Replacement Belt ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Change belt on hoover savvy bag and bagless upright vacuum


... Hoover U8155-900 Savvy Bagged Upright Vacuum

There is no suction - Hoover U8171-900 / U8172-900 / U8173-900 / U8174-900 Savvy Bagless Upright Vacuum


If the filters are clean then as your facing the back you will see 2 channels one is shaped like a j there are 10 screws take them out and clean the chanels being careful of the thin rubber seals around the outer edge lt the piece you take off.if its ... Hoover U8171-900 / U8172-900 / U8173-900 / U8174-900 Savvy Bagless Upright Vacuum

In Carpet mode brushes are not spinning. - Hoover U8135-900 / U8153-900 Savvy Turbo 7300 Bagless Upright Vacuum


Have you checked to see if it has a belt that drives the brush roller? If it has one it could have come off or broken. Also could be the control switch. ... Hoover U8135-900 / U8153-900 Savvy Turbo 7300 Bagless Upright Vacuum

Roller bars on bottom not rolling - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


The belt has probably broken. Hoover says that the belt on this model should last the life of the vacuum, but that is rarely the case. They do wear and break. Changing the belt is simple and the belts aren't to much. You can get a replacement here: ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Brush won't turn pn Noover 7400 - HQRP Hepa Filter fits Hoover Savvy TurboPOWER 7300 Bagless, 7400


... HQRP Hepa Filter fits Hoover Savvy TurboPOWER 7300 Bagless, 7400

I have a hoover savvy bagless and the agitator only spins when you pull the vaccum backwards? I have replaced the agitator and belt.


... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

I have a Hoover Savvy Bagless Upright. The beater bar does not turn. It does not appear to be the belt.


The Savvy has a brush roll motor, whcih could be bad. There also is a circuit board near the brush roll motor, a circuit board underneath the tool holder, and the switch asm. in the handle. Any of which could be the cause of the brush roll not turn ... Vacuums

Beater brush will not rotate - Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum


If you have not had this unit in for any previous service, and you are tilting it back to engage the brush with the swich on carpet mode, then I would likely suspect the switch assembly in the upper handle. The new switch and harness can be replaced ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Hoover u8145-900 savvy upright bagless


Me too ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Hoover Savvy Bagless; wind nozzle doesn't turn


Has it been taken apart before? if so it wasn't put back together right.call me and i will walk you through putting it back together so it will work.i don't charge for the help just like to help people ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

HOOVER SAVVY This is less than a year old (yep, no receipt) and all of a sudden last night the vacuum turns off after a moment of running. Also the red and green lights do not work at all. I've thoroughly cleaned the bagless unit, and it still won't work. It powers on for a split second then turns itself off. Help please.


I had the same problem. Took it in and the repair shop they said it was the switch. It was an $18 switch and $30 labor. Switch was a red on/off button with 2 wire leads and caps to screw on for connection. If you can wire a ceiling fan then this ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Hoover windtunnel bagless canister fuse - Hoover S3755 WindTunnel Bagless Canister Vacuum


... Hoover S3755 WindTunnel Bagless Canister Vacuum

Hoover flair needs a belt replacement - Hoover S2200 Flair Bagless Upright Vacuum


Remove the small screws on the bottom of the powerhead. On some models there are 2 hidden beneath the rubber wheels in front. Just pop the wheels out with a flat blade screwdriver and remove those two as well. Remove the hood and you have access to t ... Hoover S2200 Flair Bagless Upright Vacuum

Belt replacement for Hoover U5100-9RM - Hoover U5753-900 WindTunnel Bagless Upright Vacuum


... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

How do change belt on Hoover U5163-900 - Hoover Fold Away U5162-900 Bagless Upright Vacuum


... Hoover Fold Away U5162-900 Bagless Upright Vacuum

Solutions for hoover sh40060 - Hoover SH40060 Bagless Canister Vacuum


... Hoover SH40060 Bagless Canister Vacuum

Replace main body on Hoover U8144-900 - Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum


... Hoover U8147-900 WindTunnel V2 Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0416 seconds